Nissan Murano Z50 (2003 year). Manual — part 208
LAN-942
[CAN]
CAN SYSTEM (TYPE 28)
Revision; 2004 April
2003 Murano
TKWA1033E
CAN SYSTEM (TYPE 28)
LAN-943
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision; 2004 April
2003 Murano
TKWA1034E
LAN-944
[CAN]
CAN SYSTEM (TYPE 28)
Revision; 2004 April
2003 Murano
Work Flow
AKS00C5T
1.
When there are no indications of “TRANSMISSION”, “METER A/C AMP” or “AUTO DRIVE POS.” on
“SELECT SYSTEM” display of CONSULT-II, print the “SELECT SYSTEM”.
2.
Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “TRANSMISSION”, “BCM”, “METER A/C
AMP”, “AUTO DRIVE POS.”, “ALL MODE AWD/4WD” and “ABS” displayed on CONSULT-II.
3.
Print all the data of “CAN DIAG SUPPORT MNTR” for “ENGINE”, “TRANSMISSION”, “BCM”, “METER A/
C AMP”, “AUTO DRIVE POS.”, “ALL MODE AWD/4WD” and “ABS” displayed on CONSULT-II.
4.
Attach the printed sheet of “SELECT SYSTEM”, “SELF-DIAG RESULTS” and “CAN DIAG SUPPORT
MNTR” onto the check sheet. Refer to
5.
Based on the indications of “SELECT SYSTEM” and the results of “CAN DIAG SUPPORT MNTR”, put
marks “v” onto the items with “No indication”, “NG”, or “UNKWN” in the check sheet table. Refer to
NOTE:
●
If “NG” is displayed on “INITIAL DIAG (Initial diagnosis)” as “CAN DIAG SUPPORT MNTR” for the diag-
nosed control unit, replace the control unit.
●
The “CAN DIAG SUPPORT MNTR” items, which are not in check sheet table, are not related to diag-
nostic procedure on service manual.
So it is not necessary to check the status of “CAN DIAG SUPPORT MNTR” items which are not indi-
cated in check sheet table.
6.
Check CAN communication line of the integrated display system. Refer to
7.
Attach the CAN DIAG MONITOR check sheet onto the check sheet. Refer to
.
PKIA2093E
PKIA8260E
PKIA8343E
CAN SYSTEM (TYPE 28)
LAN-945
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision; 2004 April
2003 Murano
8.
Mark the “NG” or “UNKWN” item of the check sheet table with “v” from the result of CAN DIAG MONITOR
check sheet. Refer to
NOTE:
If “NG” is displayed on “CAN COMM” as “CAN DIAG MNTR” for the diagnosed control unit, replace the
control unit. Refer to
AV-110, "CAN Communication Line Check"
9.
According to the check sheet results (example), start inspection. Refer to
LAN-946
[CAN]
CAN SYSTEM (TYPE 28)
Revision; 2004 April
2003 Murano
CHECK SHEET
NOTE:
If “NG” is displayed on “INITIAL DIAG (Initial diagnosis)” or “CAN COMM” for the diagnosed control unit,
replace the control unit.
PKIB1015E
CAN SYSTEM (TYPE 28)
LAN-947
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision; 2004 April
2003 Murano
PKIB0865E
LAN-948
[CAN]
CAN SYSTEM (TYPE 28)
Revision; 2004 April
2003 Murano
CHECK SHEET RESULTS (EXAMPLE)
NOTE:
If “NG” is displayed on “INITIAL DIAG (Initial diagnosis)” or “CAN COMM” for the diagnosed control unit,
replace the control unit.
Case 1
Check harness between TCM and data link connector. Refer to
LAN-963, "Circuit Check Between TCM and
PKIB1016E
SKIA5473E
CAN SYSTEM (TYPE 28)
LAN-949
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision; 2004 April
2003 Murano
Case 2
Check harness between data link connector and driver seat control unit. Refer to
Between Data Link Connector and Driver Seat Control Unit"
.
PKIB1017E
SKIA5474E
LAN-950
[CAN]
CAN SYSTEM (TYPE 28)
Revision; 2004 April
2003 Murano
Case 3
Check harness between driver seat control unit and ABS actuator and electric unit (control unit). Refer to
.
PKIB1018E
SKIA5475E
CAN SYSTEM (TYPE 28)
LAN-951
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision; 2004 April
2003 Murano
Case 4
Check ECM circuit. Refer to
PKIB1019E
SKIA5476E
LAN-952
[CAN]
CAN SYSTEM (TYPE 28)
Revision; 2004 April
2003 Murano
Case 5
Check TCM circuit. Refer to
.
PKIB1020E
SKIA5477E
CAN SYSTEM (TYPE 28)
LAN-953
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision; 2004 April
2003 Murano
Case 6
Check display unit circuit. Refer to
LAN-966, "Display Unit Circuit Check"
PKIB1021E
SKIA5478E
LAN-954
[CAN]
CAN SYSTEM (TYPE 28)
Revision; 2004 April
2003 Murano
Case 7
Check data link connector circuit. Refer to
LAN-966, "Data Link Connector Circuit Check"
PKIB1022E
SKIA5479E
CAN SYSTEM (TYPE 28)
LAN-955
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision; 2004 April
2003 Murano
Case 8
Check BCM circuit. Refer to
PKIB1023E
SKIA5480E
LAN-956
[CAN]
CAN SYSTEM (TYPE 28)
Revision; 2004 April
2003 Murano
Case 9
Check unified meter and A/C amp. circuit. Refer to
LAN-967, "Unified Meter and A/C Amp. Circuit Check"
PKIB1024E
SKIA5481E
CAN SYSTEM (TYPE 28)
LAN-957
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision; 2004 April
2003 Murano
Case 10
Check steering angle sensor circuit. Refer to
LAN-968, "Steering Angle Sensor Circuit Check"
PKIB1025E
SKIA5482E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст