Nissan Pathfinder (2007 year). Manual — part 344
ELECTRICAL UNITS LOCATION
PG-75
C
D
E
F
G
H
I
J
L
M
A
B
PG
2007 Pathfinder
WKIA5025E
PG-76
HARNESS CONNECTOR
2007 Pathfinder
HARNESS CONNECTOR
PFP:B4341
Description
EKS00G8V
HARNESS CONNECTOR (TAB-LOCKING TYPE)
●
The tab-locking type connectors help prevent accidental looseness or disconnection.
●
The tab-locking type connectors are disconnected by pushing or lifting the locking tab(s). Refer to the
illustration below.
Refer to the next page for description of the slide-locking type connector.
CAUTION:
Do not pull the harness or wires when disconnecting the connector.
[Example]
SEL769DA
HARNESS CONNECTOR
PG-77
C
D
E
F
G
H
I
J
L
M
A
B
PG
2007 Pathfinder
HARNESS CONNECTOR (SLIDE-LOCKING TYPE)
●
A new style slide-locking type connector is used on certain systems and components, especially those
related to OBD.
●
The slide-locking type connectors help prevent incomplete locking and accidental looseness or discon-
nection.
●
The slide-locking type connectors are disconnected by pushing or pulling the slider. Refer to the illustra-
tion below.
CAUTION:
●
Do not pull the harness or wires when disconnecting the connector.
●
Be careful not to damage the connector support bracket when disconnecting the connector.
[Example]
AEL299C
PG-78
HARNESS CONNECTOR
2007 Pathfinder
HARNESS CONNECTOR (LEVER LOCKING TYPE)
●
Lever locking type harness connectors are used on certain control units and control modules such as
ECM, ABS actuator and electric unit (control unit), etc.
●
Lever locking type harness connectors are also used on super multiple junction (SMJ) connectors.
●
Always confirm the lever is fully locked in place by moving the lever as far as it will go to ensure full con-
nection.
CAUTION:
Always confirm the lever is fully released (loosened) before attempting to disconnect or connect these
connectors to avoid damage to the connector housing or terminals.
LKIA0670E
1.
Control unit with single lever
A. Fasten
B. Loosen
C. Lever
2.
Control unit with dual levers
A. Levers
B. Fasten
C. Loosen
3.
SMJ connector
A. Lever
B. Fasten
C. Loosen
HARNESS CONNECTOR
PG-79
C
D
E
F
G
H
I
J
L
M
A
B
PG
2007 Pathfinder
HARNESS CONNECTOR (DIRECT-CONNECT SRS COMPONENT TYPE)
●
SRS direct-connect type harness connectors are used on certain SRS components such as air bag mod-
ules and seat belt pre-tensioners.
●
Always pull up to release black locking tab prior to removing connector from SRS component.
●
Always push down to lock black locking tab after installing connector to SRS component. When locked,
the black locking tab is level with the connector housing.
CAUTION:
●
Do not pull the harness or wires when removing connectors
from SRS components.
WHIA0103E
PG-80
ELECTRICAL UNITS
2007 Pathfinder
ELECTRICAL UNITS
PFP:23710
Terminal Arrangement
EKS00G8W
WKIA5869E
STANDARDIZED RELAY
PG-81
C
D
E
F
G
H
I
J
L
M
A
B
PG
2007 Pathfinder
STANDARDIZED RELAY
PFP:25230
Description
EKS00G8X
NORMAL OPEN, NORMAL CLOSED AND MIXED TYPE RELAYS
Relays can mainly be divided into three types: normal open, normal closed and mixed type relays.
TYPE OF STANDARDIZED RELAYS
SEL881H
SEL882H
1M
1 Make
2M
2 Make
1T
1 Transfer
1M·1B
1 Make 1 Break
PG-82
STANDARDIZED RELAY
2007 Pathfinder
WKIA0253E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст