Nissan Titan A60. Manual — part 67
AV
MICROPHONE
AV-93
< REMOVAL AND INSTALLATION >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
MICROPHONE
Removal and Installation
INFOID:0000000006713607
REMOVAL
1. Remove the front roof console finisher. Refer to
2. Disconnect the Bluetooth microphone connector (A).
3. Detach the Bluetooth microphone (1) from the front roof console
finisher and remove the Bluetooth microphone (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0275ZZ
ALNIA0274ZZ
AV-94
< REMOVAL AND INSTALLATION >
[MID AUDIO]
TEL ANTENNA
TEL ANTENNA
Removal and Installation
INFOID:0000000006713608
REMOVAL
1. Disconnect the battery negative terminal.
2. Slide the front passenger seat fully forward.
3. Remove the Bluetooth control unit kick shield screws and remove the Bluetooth control unit kick shield.
4. Remove the Bluetooth antenna screws (A), disconnect the Blue-
tooth antenna connector (B) and remove the Bluetooth antenna
(1).
• Bluetooth control unit screws (C)
• Bluetooth control unit (2)
•
:Front of vehicle
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0281ZZ
AV
BLUETOOTH CONTROL UNIT
AV-95
< REMOVAL AND INSTALLATION >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BLUETOOTH CONTROL UNIT
Removal and Installation
INFOID:0000000006713609
REMOVAL
1. Disconnect the negative battery terminal.
2. Slide the front passenger seat fully forward.
3. Remove the Bluetooth control unit kick shield screws and remove the Bluetooth control unit kick shield.
4. Remove the Bluetooth control unit screws (C), disconnect the
Bluetooth control unit connectors and remove the Bluetooth con-
trol unit (2).
• Bluetooth antenna (1)
• Bluetooth antenna screws (A)
• Bluetooth antenna connector (B)
•
:Front of vehicle
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0281ZZ
AV-96
< BASIC INSPECTION >
[PREMIUM WITHOUT NAVIGATION]
DIAGNOSIS AND REPAIR WORKFLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000006166488
OVERALL SEQUENCE
DETAILED FLOW
1.
GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the
incident/malfunction occurred).
>> GO TO 2.
2.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition
when the symptom is detected.
>> GO TO 3.
3.
DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Inspect according to Diagnostic Procedure of the system.
ALNIA0182GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст