Nissan Titan A60. Manual — part 967
TM-256
< UNIT DISASSEMBLY AND ASSEMBLY >
REPAIR FOR COMPONENT PARTS
6. Install high and low reverse clutch hub to mid sun gear assem-
bly.
7. Install snap ring to mid sun gear assembly using suitable tool.
CAUTION:
Do not expand snap ring excessively.
8. Check operation of 1st one-way clutch.
a. Hold mid sun gear and turn rear sun gear.
b. Check 1st one-way clutch for correct locking and unlocking
directions.
CAUTION:
If not as shown, check installation direction of 1st one-way
clutch.
9. Install needle bearing and bearing races to high and low reverse
clutch hub.
CAUTION:
• Apply petroleum jelly to needle bearing and bearing
races.
• Take care with order of bearing races.
High and Low Reverse Clutch
INFOID:0000000006159469
COMPONENTS
SCIA2856E
SCIA2855E
SCIA3132E
SCIA5238E
REPAIR FOR COMPONENT PARTS
TM-257
< UNIT DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
DISASSEMBLY
1. Remove bearing race from high and low reverse clutch drum.
2. Remove snap ring from high and low reverse clutch drum using
suitable tool.
3. Remove drive plates, driven plates and retaining plate from high
and low reverse clutch drum.
INSPECTION
• Check the following, and replace high and low reverse clutch assembly if necessary.
High and Low Reverse Clutch Snap Ring
• Check for deformation, fatigue or damage.
High and Low Reverse Clutch Drive Plates
• Check facing for burns, cracks or damage.
High and Low Reverse Clutch Retaining Plate and Driven Plates
• Check facing for burns, cracks or damage.
ASSEMBLY
1.
High and low reverse clutch drum
2.
Driven plate
3.
Retaining plate
4.
Snap ring
5.
Drive plate
6.
Bearing race
SCIA5239E
SCIA5240E
SCIA2868E
TM-258
< UNIT DISASSEMBLY AND ASSEMBLY >
REPAIR FOR COMPONENT PARTS
1. Install drive plates, driven plates and retaining plate in high and
low reverse clutch drum.
CAUTION:
Take care with the order of plates.
2. Install snap ring in high and low reverse clutch drum using suit-
able tool.
3. Install bearing race to high and low reverse clutch drum.
CAUTION:
Apply petroleum jelly to bearing race.
Direct Clutch
INFOID:0000000006159470
COMPONENTS
SCIA5241E
SCIA2868E
SCIA5240E
REPAIR FOR COMPONENT PARTS
TM-259
< UNIT DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
DISASSEMBLY
1. Remove snap rings from direct clutch drum using suitable tool.
2. Remove drive plates, driven plates and retaining plate from
direct clutch drum.
INSPECTION
• Check the following, and replace direct clutch assembly if necessary.
Direct Clutch Snap Rings
• Check for deformation, fatigue or damage.
Direct Clutch Drive Plates
• Check facing for burns, cracks or damage.
Direct Clutch Retaining Plate and Driven Plates
• Check facing for burns, cracks or damage.
ASSEMBLY
1.
Direct clutch drum
2.
Driven plate
3.
Retaining plate
4.
Snap ring
5.
Drive plate
SCIA5242E
SCIA2868E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст