Nissan Titan A60. Manual — part 19
ADP-66
< DTC/CIRCUIT DIAGNOSIS >
SEAT MEMORY SWITCH
2.
CHECK MEMORY SWITCH GROUND CIRCUIT
Check continuity between seat memory switch harness connector
and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair or replace harness.
3.
CHECK SEAT MEMORY SWITCH
ADP-66, "Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Replace seat memory switch. Refer to
ADP-150, "Removal and Installation"
.
4.
CHECK INTERMITTENT INCIDENT
GI-39, "Intermittent Incident"
Is the inspection result normal?
YES
>> Replace automatic drive positioner control unit. Refer to
ADP-149, "Removal and Installation"
NO
>> Repair or replace the malfunctioning part.
Component Inspection
INFOID:0000000006163514
1.
CHECK SEAT MEMORY SWITCH
1. Turn ignition switch OFF.
2. Disconnect seat memory switch.
3. Check continuity between seat memory switch terminals.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace seat memory switch. Refer to
ADP-150, "Removal and Installation"
.
Seat memory switch
connector
Terminal
Ground
Continuity
D5
4
Yes
PIIA4821E
Terminal
Condition
Continuity
Seat memory switch
4
1
Memory switch 1
Push
Yes
Release
No
2
Memory switch 2
Push
Yes
Release
No
3
Set switch
Push
Yes
Release
No
LIIA1020E
DOOR MIRROR REMOTE CONTROL SWITCH
ADP-67
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
DOOR MIRROR REMOTE CONTROL SWITCH
CHANGEOVER SWITCH
CHANGEOVER SWITCH : Description
INFOID:0000000006163515
Changeover switch is integrated into door mirror remote control switch.
Changeover switch has three positions (L, N and R).
It changes door mirror motor operation by transmitting control signal to automatic drive positioner control unit.
CHANGEOVER SWITCH : Component Function Check
INFOID:0000000006163516
1.
CHECK CHANGEOVER SWITCH FUNCTION
Check the operation on “MIR CHNG SW-R” or “MIR CHNG SW-L” in “DATA MONITOR” mode with CON-
SULT-III.
Refer to
ADP-26, "CONSULT-III Function"
.
Is the inspection result normal?
YES
>> Changeover switch function is OK.
NO
>> Refer to
ADP-67, "CHANGEOVER SWITCH : Diagnosis Procedure"
.
CHANGEOVER SWITCH : Diagnosis Procedure
INFOID:0000000006163517
Regarding Wiring Diagram information, refer to
1.
CHECK CHANGEOVER SWITCH SIGNAL
1. Turn ignition switch to ACC.
2. Check voltage between automatic drive positioner control unit
connector and ground.
Is the inspection result normal?
YES
>> GO TO 6
NO
>> GO TO 2
2.
CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect automatic drive positioner control unit and door mir-
ror remote control switch.
3. Check continuity between automatic drive positioner control unit
connector and door mirror remote control switch connector.
Terminals
Change over switch
condition
Voltage (V)
(Approx.)
(+)
(-)
Automatic drive
positioner control
unit connector
Terminal
M33
2
Ground
RIGHT
0
Other than above
5
18
LEFT
0
Other than above
5
PIIA4767E
Automatic drive
positioner control
unit connector
Terminal
Door mirror re-
mote control
switch connector
Terminal
Continuity
M33 (A)
2
D10 (B)
11
Yes
18
10
ALJIA0201ZZ
ADP-68
< DTC/CIRCUIT DIAGNOSIS >
DOOR MIRROR REMOTE CONTROL SWITCH
4. Check continuity between automatic drive positioner control unit connector and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair or replace harness.
3.
CHECK DOOR MIRROR REMOTE CONTROL SWITCH GROUND CIRCUIT
Check continuity between door mirror remote control switch connec-
tor and ground.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Repair or replace harness.
4.
CHECK AUTOMATIC DRIVE POSITIONER CONTROL UNIT OUTPUT SIGNAL
1. Connect automatic drive positioner control unit.
2. Turn ignition switch to ACC.
3. Check voltage between automatic drive positioner control unit
connector and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Replace automatic drive positioner control unit. Refer to
ADP-149, "Removal and Installation"
5.
CHECK CHANGEOVER SWITCH
Check changeover switch.
ADP-69, "CHANGEOVER SWITCH : Component Inspection"
.
Is the inspection result normal?
YES
>> Refer to
GI-39, "Intermittent Incident"
.
NO
>> Replace door mirror remote control switch. Refer to
ADP-151, "Removal and Installation"
6.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
GI-39, "Intermittent Incident"
Is the inspection result normal?
YES
>> Replace automatic drive positioner control unit. Refer to
ADP-149, "Removal and Installation"
NO
>> Repair or replace the malfunctioning parts.
Automatic drive positioner control
unit connector
Terminal
Ground
Continuity
M33 (A)
2
No
18
Door mirror remote control switch
connector
Terminal
Ground
Continuity
D10
7
Yes
ALJIA0189ZZ
Terminals
Voltage (V)
(Approx.)
(+)
(-)
Automatic drive positioner
control unit connector
Terminal
M33
2
Ground
5
18
PIIA4767E
DOOR MIRROR REMOTE CONTROL SWITCH
ADP-69
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
CHANGEOVER SWITCH : Component Inspection
INFOID:0000000006163518
1.
CHECK CHANGEOVER SWITCH
Check door mirror remote control switch.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace door mirror remote control switch. Refer to
ADP-151, "Removal and Installation"
MIRROR SWITCH
MIRROR SWITCH : Description
INFOID:0000000006163519
It operates angle of the door mirror face.
It transmits mirror face adjust operation to automatic drive positioner control unit.
MIRROR SWITCH : Component Function Check
INFOID:0000000006163520
1.
CHECK MIRROR SWITCH FUNCTION
Check the operation on “MIR CON SW–UP/DN” and “MIR CON SW–RH/LH” in “DATA MONITOR” mode
with CONSULT-III.
ADP-26, "CONSULT-III Function"
.
Is the inspection result normal?
YES
>> Mirror switch function is OK.
NO
>> Refer to
ADP-69, "MIRROR SWITCH : Diagnosis Procedure"
.
MIRROR SWITCH : Diagnosis Procedure
INFOID:0000000006163521
Regarding Wiring Diagram information, refer to
1.
CHECK MIRROR SWITCH FUNCTION
1. Turn ignition switch to ACC.
2. Check voltage between automatic drive positioner control unit
connector and ground.
Terminal
Change over switch
condition
Continuity
Door mirror remote control switch
10
7
LEFT
Yes
Other than above
No
11
RIGHT
Yes
Other than above
No
ALJIA0272ZZ
PIIA4771E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст