Nissan Titan A60. Manual — part 703
LU-10
< PERIODIC MAINTENANCE >
ENGINE OIL
• The refill capacity depends on the engine oil temperature and drain time. Use these specifica-
tions for reference only.
• Always use the oil level gauge to determine when the proper amount of engine oil is in the
engine.
8. Warm up engine and check area around drain plug and oil filter for oil leakage.
9. Stop engine and wait for 10 minutes.
10. Check engine oil level. Refer to
.
OIL FILTER
LU-11
< PERIODIC MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
A
LU
N
P
O
OIL FILTER
Removal and Installation
INFOID:0000000006158406
REMOVAL
1. Remove engine undercover using a power tool.
2. Drain the engine oil. Refer to
.
3. Remove the oil filter using Tool.
WARNING:
• Be careful not to get burned when the engine and engine
oil are hot.
CAUTION:
• The oil filter is provided with a relief valve.
Use Genuine NISSAN oil filter or equivalent.
• When removing, prepare a shop cloth to absorb any
engine oil leakage or spillage.
• Do not allow engine oil to adhere to the drive belts.
• Completely wipe off any engine oil that adheres to the engine and the vehicle.
INSTALLATION
1. Remove foreign materials adhering to the oil filter installation surface.
2. Apply engine oil to the oil seal circumference of the new oil filter.
3. Screw the oil filter manually until it touches the installation sur-
face, then tighten it by 2/3 turn. Or tighten to specification.
4. Refill the engine with new engine oil. Refer to
5. Inspect the engine for oil leakage. Follow the "INSPECTION
AFTER INSTALLATION" procedure.
6. Install engine undercover using a power tool.
INSPECTION AFTER INSTALLATION
1. Check the engine oil level. Refer to
.
2. Start the engine and check for engine oil leakage.
3. Stop the engine and wait for 10 minutes.
4. Check the engine oil level and add engine oil as required.
Tool number
: KV10115801 (J-38956)
WBIA0388E
SMA010
Oil filter
: 17.7 N·m (1.8 kg-m, 13 ft-lb)
SMA229B
LU-12
< REMOVAL AND INSTALLATION >
OIL COOLER
REMOVAL AND INSTALLATION
OIL COOLER
Exploded View
INFOID:0000000006158407
Removal and Installation
INFOID:0000000006158408
WARNING:
Be careful not to burn yourself, as the engine oil and engine coolant are hot.
REMOVAL
1. Drain engine coolant from the radiator. Refer to
CO-11, "Changing Engine Coolant"
2. Disconnect water hoses from the oil cooler.
CAUTION:
Do not spill engine coolant on the drive belt.
NOTE:
Cap or plug opening(s) to prevent fluid from spilling.
3. Remove oil filter. Refer to
LU-11, "Removal and Installation"
CAUTION:
Do not spill engine oil on the drive belts.
4. Remove connector bolt, and remove oil cooler and O-ring.
INSPECTION AFTER REMOVAL
Oil Cooler
1.
Oil pan (Upper)
2.
Water hose
3.
Water pipe
4.
Water hose
5.
Connector bolt
6.
Oil filter
7.
Oil cooler
8.
O-ring
9.
Relief valve
10. Water hose
11. Connector pipe
12. Gasket
A.
To thermostat housing
B.
Refer to
C.
To cylinder block
WBIA0790E
OIL COOLER
LU-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
M
A
LU
N
P
O
Check oil cooler for cracks. Check oil cooler for clogging by blowing compressed air through engine coolant
inlet. If necessary, replace oil cooler assembly.
Relief Valve
Inspect relief valve for movement, cracks and breaks by pushing the ball. If replacement is necessary, remove
the valve by prying it out using a suitable tool. Install a new valve in place by tapping it.
INSTALLATION
Installation is in the reverse order of removal, paying attention to the following:
• Confirm that no foreign objects are adhering to the sealing sur-
faces of the oil cooler or oil pan.
• Tighten the connecting bolt after aligning the stopper on the oil pan
side with protrusion of the oil cooler.
• Install using a new O-ring.
INSPECTION AFTER INSTALLATION
1. Check levels and add engine oil and engine coolant. Refer to
.
2. Start the engine, and check for engine oil and engine coolant leaks and repair as necessary.
3. Stop the engine and wait for 10 minutes.
4. Check engine oil level and engine coolant level again. Refer to
KBIA2500E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст