Nissan Titan A60. Manual — part 673
INSTRUMENT PANEL ASSEMBLY
IP-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
REMOVAL AND INSTALLATION
INSTRUMENT PANEL ASSEMBLY
Exploded View
INFOID:0000000006161533
AWJIA0474GB
IP-12
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
Removal and Installation
INFOID:0000000006161534
REMOVAL
CAUTION:
Before servicing the SRS, turn the ignition switch off, disconnect both battery terminals and wait at
least three minutes.
1. Disconnect both the negative and positive battery terminals, then wait at least three minutes.
2. Remove the center console. Refer to
IP-19, "Removal and Installation"
.
3. Remove instrument lower cover LH. Refer to
IP-17, "Removal and Installation"
.
4. Remove the steering column. Refer to
ST-12, "Removal and Installation"
.
5. Remove the combination meter. Refer to
MWI-93, "Removal and Installation"
6. Remove audio unit. Refer to
AV-34, "Removal and Installation"
7. Remove display unit (if equipped). Refer to
AV-327, "Removal and Installation"
8. Remove lower knee protector.
9. Remove defroster grille and disconnect the optical sensor harness.
10. Remove side ventilator assembly LH.
11. Remove the LH assist grip and windshield garnish.
12. Remove side ventilator assembly RH.
13. Remove the RH assist grip and windshield garnish.
14. Remove the passenger air bag module. Refer to
SR-8, "Removal and Installation"
15. Remove instrument panel and pad assembly.
16. Disconnect remaining instrument panel assembly electrical connectors.
INSTALLATION
Installation is in the reverse order of removal.
1.
Defroster grille
2.
Speaker grille RH/LH
3.
Instrument panel and pad assembly
4.
Deck pocket mat RH/LH
5.
Side ventilator assembly RH/LH
6.
Combination meter cover
7.
Combination meter
8.
Switch assembly
9.
Cluster lid A
10. Lower knee protector
11.
Lower instrument panel LH
12. Steering column cover upper
13. Steering column cover lower
14.
Clluster lid D
15. Cluster lid C
16. Instrument lower cover RH
17.
Glove box
18. Audio unit
19. Audio bracket RH/LH
20.
Center ventilator assembly RH/LH
21. Display assembly (if equipped)
22. Glove box lid striker
23.
Fuse block cover
24. Lower instrument panel RH
25. Glove box damper (if equipped)
26.
Steering member
CLUSTER LID A
IP-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CLUSTER LID A
Exploded View
INFOID:0000000006161535
Removal and Installation
INFOID:0000000006161536
REMOVAL
1. Remove the lower instrument panel LH. Refer to
IP-17, "Removal and Installation"
.
2. Tilt the steering wheel to the lowest position, then remove steering column cover upper.
3. Remove ignition switch escutcheon.
4. Pull cluster lid A rearward in vehicle to release the clips.
5. Disconnect the electrical connector(s), then remove cluster lid A.
INSTALLATION
Installation is in the reverse order of removal.
1.
Cluster lid A
2.
Ignition switch escutcheon
Metal Clip
AWJIA0374ZZ
IP-14
< REMOVAL AND INSTALLATION >
CLUSTER LID C
CLUSTER LID C
Exploded View
INFOID:0000000006161537
Removal and Installation
INFOID:0000000006161538
REMOVAL
1. Remove center console upper finisher and A/T finisher (if equipped). Refer to
.
2. Remove instrument lower panel RH and glove box. Refer to
IP-16, "Removal and Installation"
3. Remove lower instrument panel LH. Refer to
IP-17, "Removal and Installation"
.
4. Remove cluster lid D. Refer to
IP-15, "Removal and Installation"
5. Disconnect the electrical connector(s), then remove cluster lid C.
6. Pull cluster lid C rearward in vehicle to release the clips.
INSTALLATION
Installation is in the reverse order of removal.
Metal clip
ALJIA0102ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст