Nissan Titan A60. Manual — part 745

    MWI-94

    < UNIT DISASSEMBLY AND ASSEMBLY >

    COMBINATION METERS

    UNIT DISASSEMBLY AND ASSEMBLY

    COMBINATION METERS

    Removal and Installation

    INFOID:0000000006164968

    Disassembly and Assembly

    Disassembly

    1. Disconnect battery negative terminal.
    2. Remove the cluster lid A. Refer to

    IP-13, "Removal and Installation"

    .

    3. Disengage the tabs to separate front cover (1), from the unified

    meter control unit assembly (2).

    Assembly

    Assembly is in the reverse order of disassembly.

    ALNIA1104ZZ

    PB-2

    < PRECAUTION >

    PRECAUTIONS

    PRECAUTION

    PRECAUTIONS

    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
    PRE-TENSIONER"

    INFOID:0000000006158508

    The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along

    with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain

    types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS

    system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front

    air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.

    Information necessary to service the system safely is included in the SR and SB section of this Service Man-

    ual.

    WARNING:

    • To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in

    the event of a collision which would result in air bag inflation, all maintenance must be performed by

    an authorized NISSAN/INFINITI dealer.

    • Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal

    injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag

    Module, see the SR section.

    • Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this

    Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-

    ness connectors.

    PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS

    WARNING:

    • When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-

    tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a

    hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing

    serious injury.

    • When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the

    battery, and wait at least 3 minutes before performing any service.

    PREPARATION

    PB-3

    < PREPARATION >

    C

    D

    E

    G

    H

    I

    J

    K

    L

    M

    A

    B

    PB

    N

    O

    P

    PREPARATION

    PREPARATION

    Commercial Service Tool

    INFOID:0000000006158509

    The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

    (Kent-Moore No.)
    Tool name

    Description

    (J-21177-A)
    Brake drum clearance gauge

    Measuring rear rotor drum to parking
    brake shoe clearance

    Power tool

    Loosening bolts and nuts

    WFIA0167E

    PBIC0190E

    Была ли эта страница вам полезна?
    Да!Нет
    6 посетителей считают эту страницу полезной.
    Большое спасибо!
    Ваше мнение очень важно для нас.

    Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

    Текст

    Матвей Александрович08.06.2024 11:46
    Политика конфиденциальности