Nissan Titan A60. Manual — part 77
AV
COMMUNICATION SIGNAL CIRCUIT
AV-133
< DTC/CIRCUIT DIAGNOSIS >
[PREMIUM WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
COMMUNICATION SIGNAL CIRCUIT
SATELLITE RADIO TUNER
SATELLITE RADIO TUNER : Description
INFOID:0000000006166522
Communication signals are exchanged between the audio unit and satellite radio tuner using the communica-
tion circuits.
SATELLITE RADIO TUNER : Diagnosis Procedure
INFOID:0000000006166523
Regarding Wiring Diagram information, refer to
AV-151, "Wiring Diagram - Without Navigation System"
1.
CHECK HARNESS - REQ1
1. Turn ignition switch OFF.
2. Disconnect satellite radio tuner (factory installed) connector M41
and audio unit connector M170.
3. Check continuity between satellite radio tuner (factory installed)
harness connector M41 (A) terminal 28 and audio unit harness
connector M170 (B) terminal 48.
4. Check continuity between satellite radio tuner (factory installed)
harness connector M41 (A) terminal 28 and ground.
Are continuity results as specified?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK HARNESS - TXD
1. Check continuity between satellite radio tuner (factory installed)
harness connector M41 (A) terminal 29 and audio unit harness
connector M170 (B) terminal 49.
2. Check continuity between satellite radio tuner (factory installed)
harness connector M41 (A) terminal 29 and ground.
Are continuity results as specified?
YES
>> GO TO 3.
NO
>> Repair harness or connector.
A
B
Continuity
Connector
Terminal
Connector
Terminal
M41
28
M170
48
Yes
A
—
Continuity
Connector
Terminal
M41
28
Ground
No
ALNIA0709GB
A
B
Continuity
Connector
Terminal
Connector
Terminal
M41
29
M170
49
Yes
A
—
Continuity
Connector
Terminal
M41
29
Ground
No
ALNIA0707GB
AV-134
< DTC/CIRCUIT DIAGNOSIS >
[PREMIUM WITHOUT NAVIGATION]
COMMUNICATION SIGNAL CIRCUIT
3.
CHECK HARNESS - RXD
1. Check continuity between satellite radio tuner (factory installed)
harness connector M41 (A) terminal 30 and audio unit harness
connector M170 (B) terminal 50.
2. Check continuity between satellite radio tuner (factory installed)
harness connector M41 (A) terminal 30 and ground.
Are continuity results as specified?
YES
>> GO TO 4.
NO
>> Repair harness or connector.
4.
CHECK REQ1 SIGNAL
1. Connect satellite radio tuner (factory installed) connector and audio unit connector.
2. Turn ignition switch to ACC
3. Check signal between satellite radio tuner (factory installed) har-
ness connector M41 terminal 28 and ground with CONSULT-III
or oscilloscope.
Are voltage readings as specified?
YES
>> GO TO 5.
NO
>> Replace audio unit. Refer to
AV-175, "Removal and Installation"
.
5.
CHECK TXD SIGNAL
Check signal between satellite radio tuner (factory installed) harness
connector M41 terminal 29 and ground with CONSULT-III or oscillo-
scope.
A
B
Continuity
Connector
Terminal
Connector
Terminal
M41
30
M170
50
Yes
A
—
Continuity
Connector
Terminal
M41
30
Ground
No
ALNIA0708GB
(+)
(-)
Reference signal
Connector
Terminal
M41
28
Ground
WKIA4544E
SKIB3825E
(+)
(-)
Reference signal
Connector
Terminal
M41
29
Ground
WKIA4545E
SKIB3824E
AV
COMMUNICATION SIGNAL CIRCUIT
AV-135
< DTC/CIRCUIT DIAGNOSIS >
[PREMIUM WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Are the voltage readings as specified?
YES
>> GO TO 6.
NO
>> Replace satellite radio tuner. Refer to
AV-187, "Removal and Installation"
6.
CHECK RXD SIGNAL
Check signal between satellite radio tuner (factory installed) harness
connector M41 terminal 30 and ground with CONSULT-III or oscillo-
scope.
Are the voltage readings as specified?
YES
>> Replace satellite radio tuner. Refer to
AV-187, "Removal and Installation"
NO
>> Replace audio unit. Refer to
AV-175, "Removal and Installation"
.
(+)
(-)
Reference signal
Connector
Terminal
M41
30
Ground
WKIA4546E
SKIB3826E
AV-136
< DTC/CIRCUIT DIAGNOSIS >
[PREMIUM WITHOUT NAVIGATION]
SOUND SIGNAL CIRCUIT
SOUND SIGNAL CIRCUIT
SATELLITE RADIO TUNER
SATELLITE RADIO TUNER : Description
INFOID:0000000006166524
Left and right channel audio signals are supplied from the satellite radio tuner to the audio unit through the
sound signal circuits.
SATELLITE RADIO TUNER : Diagnosis Procedure
INFOID:0000000006166525
Regarding Wiring Diagram information, refer to
AV-151, "Wiring Diagram - Without Navigation System"
LEFT CHANNEL
1.
CHECK HARNESS
1. Turn ignition switch OFF.
2. Disconnect satellite radio tuner (factory installed) connector M41
and audio unit connector M170.
3. Check continuity between satellite radio tuner (factory installed)
connector M41 (A) and audio unit connector M170 (B).
4. Check continuity between satellite radio tuner (factory installed) connector M41 (A) and ground.
Are continuity results as specified?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK LEFT CHANNEL AUDIO SIGNAL
1. Connect satellite radio tuner (factory installed) and audio unit.
2. Turn ignition switch ON.
3. Check signal between satellite radio tuner (factory installed)
connector M41 terminals 21 and 22 with CONSULT-III or oscillo-
scope.
Are voltage readings as specified?
A
B
Continuity
Connector
Terminal
Connector
Terminal
M41
21
M170
41
Yes
22
42
A
—
Continuity
Connector
Terminal
M41
21
Ground
No
22
ALNIA0710GB
Connector
(+)
(-)
Reference signal
Terminals
M41
22
21
ALNIA0880GB
SKIB3609E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст