Nissan Titan A60. Manual — part 87
AV
PRECAUTIONS
AV-173
< PRECAUTION >
[PREMIUM WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000006166535
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB section of this Service Man-
ual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
AV-174
< PREPARATION >
[PREMIUM WITHOUT NAVIGATION]
PREPARATION
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000006166536
Tool name
Description
Power tool
Loosening bolts and nuts
PBIC0191E
AV
AUDIO UNIT
AV-175
< REMOVAL AND INSTALLATION >
[PREMIUM WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
REMOVAL AND INSTALLATION
AUDIO UNIT
Removal and Installation
INFOID:0000000006166537
AUDIO UNIT
Removal
1. Disconnect the battery negative terminal.
2. Remove the cluster lid C. Refer to
IP-15, "Removal and Installation"
3. Remove the audio unit screws (A), using power tool.
4. Pull out the audio unit (1) and disconnect the audio unit connec-
tors.
Installation
Installation is in the reverse order of removal.
AV SWITCH
Removal
1. Disconnect battery negative terminal.
2. Remove the cluster lid C. Refer to
IP-15, "Removal and Installation"
3. Remove the AV switch screws.
4. Carefully remove the AV switch.
Installation
Installation is in the reverse order of removal.
ALNIA0646ZZ
WKIA1798E
AV-176
< REMOVAL AND INSTALLATION >
[PREMIUM WITHOUT NAVIGATION]
FRONT TWEETER
FRONT TWEETER
Removal and Installation
INFOID:0000000006166538
FRONT TWEETER
Removal
1. Remove the front tweeter grille. Refer to
IP-12, "Removal and Installation"
2. Remove the front tweeter clips (C103) (A).
3. Disconnect the front tweeter connector and remove the front
tweeter (1).
Installation
Installation is in the reverse order of removal.
ALNIA0642ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст