Nissan Pathfinder (2008 year). Manual — part 623
CONTROL UNIT
VTL-9
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
2.
Remove the four rear air control (rear) screws (A) and remove
the rear air control (rear) (1) from the rear finisher assembly.
Installation
Installation is in the reverse order of removal.
ALIIA0136ZZ
VTL-10
< ON-VEHICLE REPAIR >
IN-VEHICLE SENSOR
IN-VEHICLE SENSOR
Removal and Installation
INFOID:0000000001672960
REMOVAL
1.
Remove the cluster lid D. Refer to
IP-10, "Removal and Installation"
.
2.
Remove the two screws and remove the in-vehicle sensor.
INSTALLATION
Installation is in the reverse order of removal.
WJIA1073E
OPTICAL SENSOR
VTL-11
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
OPTICAL SENSOR
Removal and Installation
INFOID:0000000001683811
REMOVAL
1.
Remove the defroster grille from the instrument panel. Refer to
.
2.
Disconnect the optical sensor connector (2).
3.
Twist the optical sensor (1) counter clockwise to remove it from
the defroster grille.
INSTALLATION
Installation is in the reverse order of removal.
ALIIA0061ZZ
VTL-12
< ON-VEHICLE REPAIR >
INTAKE SENSOR
INTAKE SENSOR
Removal and Installation
INFOID:0000000001672962
REMOVAL
1.
Remove the front kick plate. Refer to
.
2.
Remove the lower dash side finisher. Refer to
.
3.
Remove the front pillar lower finisher. Refer to
.
4.
Remove the assist grip handle.
5.
Remove the front pillar upper finisher. Refer to
6.
Remove the lower glove box. Refer to
.
7.
Remove the upper glove box (cluster lid E). Refer to
8.
Disconnect the intake sensor electrical connector.
NOTE:
The intake sensor is located on the top of the front heater and
cooling unit assembly next to the A/C evaporator cover.
9.
Twist the intake sensor to remove the intake sensor from the
front heater and cooling unit assembly.
INSTALLATION
Installation is in the reverse order of removal.
LJIA0133E
BLOWER MOTOR
VTL-13
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
BLOWER MOTOR
Component
INFOID:0000000001672963
Front Blower Motor
Rear Blower Motor
Removal and Installation
INFOID:0000000001672964
FRONT BLOWER MOTOR
Removal
1.
Remove the lower glove box assembly. Refer to
.
2.
Disconnect the front blower motor electrical connector.
3.
Remove the three screws and remove the front blower motor.
Installation
Installation is in the reverse order of removal.
LJIA0136E
1.
Front heater and cooling unit assembly
2.
Front blower motor
3.
Variable blower control
LJIA0055E
1.
Rear blower motor
2.
Rear blower motor case
3.
Rear blower motor resistor
VTL-14
< ON-VEHICLE REPAIR >
BLOWER MOTOR
REAR BLOWER MOTOR
Removal
1.
Remove the rear heater and cooling unit assembly. Refer to
VTL-18, "Removal and Installation"
2.
Disconnect the rear blower motor electrical connector.
3.
Remove the three screws and remove the rear blower motor.
Installation
Installation is in the reverse order of removal.
VARIABLE BLOWER CONTROL
VTL-15
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
VARIABLE BLOWER CONTROL
Removal and Installation
INFOID:0000000001672973
Variable Blower Control - Front Heater and Cooling Unit Assembly
REMOVAL
1.
Disconnect the variable blower control electrical connector.
2.
Remove the two screws and remove the variable blower control.
INSTALLATION
Installation is in the reverse order of removal.
LBIA0415E
1.
Front heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor (passenger)
4.
Variable blower control
5.
Air mix door motor (driver)
6.
Mode door motor
VTL-16
< ON-VEHICLE REPAIR >
REAR BLOWER MOTOR RESISTOR
REAR BLOWER MOTOR RESISTOR
Removal and Installation
INFOID:0000000001672974
Rear Blower Motor Resistor
REMOVAL
1.
Remove the luggage side lower finisher RH. Refer to
.
2.
Disconnect the rear blower motor resistor electrical connector.
3.
Remove the two screws and remove the rear blower motor resistor.
INSTALLATION
Installation is in the reverse order of removal.
LJIA0055E
1.
Rear blower motor
2.
Rear blower motor case
3.
Rear blower motor resistor
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст