Nissan Pathfinder (2008 year). Manual — part 490
DOOR MIRROR
MIR-5
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
Wiring Diagram — Door Mirror (Without Heated Mirrors) —
INFOID:0000000001716869
ALLWA0038GB
MIR-6
< COMPONENT DIAGNOSIS >
DOOR MIRROR
ALLIA0229GB
DOOR MIRROR
MIR-7
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
ALLIA0230GB
MIR-8
< COMPONENT DIAGNOSIS >
INSIDE MIRROR
INSIDE MIRROR
Wiring Diagram
INFOID:0000000001716870
ALLWA0040GB
INSIDE MIRROR
MIR-9
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
ALLIA0265GB
MIR-10
< PRECAUTION >
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000001716872
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB section of this Service Man-
ual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PREPARATION
MIR-11
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
SERVICE INFORMATION
PREPARATION
Special Service Tool
INFOID:0000000001712799
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tool
INFOID:0000000001712800
Tool number
(Kent-Moore No.)
Tool name
Description
—
(J-39570)
Chassis ear
Locating the noise
—
(J-43980)
NISSAN Squeak and Rat-
tle Kit
Repairing the cause of noise
SIIA0993E
SIIA0994E
(Kent-Moore No.)
Tool name
Description
(J-39565)
Engine ear
Locating the noise
(
—
)
Suction Lifter
Holding door glass
SIIA0995E
LIIA1991E
MIR-12
< SERVICE INFORMATION >
INSIDE MIRROR
INSIDE MIRROR
Removal and Installation
INFOID:0000000001712342
INSIDE MIRROR
1.
Remove inside mirror finisher.
2.
Slide the mirror upward to remove.
3.
Disconnect the connector.
Installation is in the reverse order of removal.
1.
Inside mirror
2.
Inside mirror finisher
LIIA0277E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст