Nissan Pathfinder (2008 year). Manual — part 544
FRONT SEAT
SE-29
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Removal and Installation
INFOID:0000000001303541
REMOVAL
When removing or installing the seat trim, handle it carefully to keep dirt out and avoid damage.
CAUTION:
• Before removing the front seat, turn the ignition switch off, disconnect both battery cables and wait
at least 3 minutes.
• When checking the power seat circuit for continuity using a circuit tester, do not confuse its connec-
tor with the side air bag module connector. Such an error may cause the air bag to deploy.
• Do not drop, tilt, or bump the side air bag module while installing the seat. Always handle it with
care.
• After front side air bag module inflates, front seatback assembly must be replaced.
• Front passenger seat is equipped with an Occupant Classification System sensor and control mod-
ule. Do not disassemble front passenger seat cushion assembly or remove the trim as this will affect
the Occupant Classification System calibration.
• Always replace passenger seat cushion as an assembly.
1.
Slide the seat until the four body bolts are visible and a tool can be inserted.
NOTE:
Set the front/rear cushion lifters to the top position.
2.
Disconnect both battery cables and wait at least 3 minutes.
3.
Disconnect the side air bag module harness connector (if equipped).
4.
Remove the four body bolts.
5.
Disconnect the power seat harness connectors and remove the seat from the vehicle.
NOTE:
When removing and installing the seat, use shop cloths to protect the vehicle from damage.
INSTALLATION
Installation is in the reverse order of removal.
1.
Front seatback lever
2.
Seatback trim without side air bag
3.
Headrest
4.
Seatback assembly with side air bag 5.
Seat cushion assembly
6.
Seat cushion outer finisher
7.
Leg cover
8.
Seat frame assembly
9.
Passenger seat wiring harness
10. Seat cushion inner cover
11. Leg cover
12. Seat belt buckle assembly
13. Inboard reclining arm outer cover
14. Inboard reclining arm inner cover
15. Outboard reclining arm inner cover
16. Outboard reclining arm outer cover
17. Seat cushion rear finisher
18. Seatback board
19. Headrest holder with multi position
lock
20. Headrest holder
21. Seatback pad without side air bag
22. Seat back frame without side air bag 23. Seatback fold flat release lever as-
sembly
24. Damper assembly
SE-30
< ON-VEHICLE REPAIR >
REAR SEAT
REAR SEAT
Removal and Installation
INFOID:0000000001303544
Second Row Outboard
Removal
1.
Tilt seat cushion forward.
2.
Remove two seat bolts.
3.
Lower seat cushion and tilt seatback forward.
4.
Remove seat base trim cover.
5.
Remove forward seat nuts and assembly.
Installation
Installation is in the reverse order of removal.
Second Row Center
Removal
1.
Tilt the seat cushion forward.
2.
Remove the seat cushion bolts and assembly.
3.
Remove the seat back bolts and assembly.
Installation
Installation is in the reverse order of removal.
Third Row
Removal
1.
Remove the lower base trim covers.
2.
Remove front anchor bolts.
3.
Lower the seatback into the cargo floor position.
4.
Remove the rear anchor bolts from the seat assembly.
5.
Remove the seat assembly.
ALJIA0226GB
AWIIA0113ZZ
WIIA0764E
REAR SEAT
SE-31
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Installation
Installation is in the reverse order of removal.
SE-32
< DISASSEMBLY AND ASSEMBLY >
FRONT SEAT
DISASSEMBLY AND ASSEMBLY
FRONT SEAT
Exploded View
INFOID:0000000001308880
Power Driver Seat
LIIA2406E
FRONT SEAT
SE-33
< DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
1.
Headrest
2.
Seatback pad without side air bag
3.
Seatback heating element
4.
Seatback assembly with side air bag 5.
Seatback trim without side air bag
6.
Power seat cushion rear finisher
7.
Leg Cover
8.
Lifter motor link bar
9.
Seat belt buckle assembly
10. Seat cushion inner finisher
11. Seat frame assembly
12. Seat lifter motor assembly
13. Seat spacer
14. Lock gear
15. Seat cushion front finisher
16. Flexible seat wire
17. Front seat slide motor assembly (LH) 18. Power seat control assembly
19. Lifter motor bracket assembly
20. Driver seat wiring harness
21. Seat cushion outer finisher
22
Leg cover
23
Bolt cover
24. Seat cushion frame
25. Recliner switch knob
26. Slide switch knob
27. Power seat switch escutcheon
28. Switch assembly
29. Seat cushion pad
30. Seat cushion heating element
31. Seat cushion trim
32. Lumbar support assembly
33. Seatback frame
34. Seatback board
35. Headrest holder with multi position
lock
36. Headrest holder
37. Lumbar support lever knob
38. Snap ring
SE-34
< DISASSEMBLY AND ASSEMBLY >
FRONT SEAT
Manual Driver Seat
LIIA2407E
1.
Headrest
2.
Seatback pad without side air bag
3.
Seatback trim without side air bag
4.
Seatback assembly with side air bag 5.
Seat cushion trim cover
6.
Seat cushion pad
7.
Seat cushion frame
8.
Seat cushion inner finisher
9.
Seat belt buckle assembly
10. Seat frame assembly
11. Leg cover
12. Bolt cover
13. Recline lever
14. Seat cushion outer finisher
15. Leg cover
16. Seat cushion rear finisher
17. Seat cushion lift knobs
18. Lumbar support assembly
FRONT SEAT
SE-35
< DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Conventional Passenger Seat
19. Seatback frame without side air bag
20. Seatback board
21. Headrest holder with multi position
lock
22
Headrest holder
23
Lumbar support lever knob
24. Snap ring
LIIA2408E
1.
Seatback trim without side air bag
2.
Headrest
3.
Seatback assembly with side air bag
4.
Switch assembly
5.
Power seat switch escutcheon
6.
Recliner switch knob
7.
Slide switch knob
8.
Seat cushion assembly
9.
Seat cushion outer cover
SE-36
< DISASSEMBLY AND ASSEMBLY >
FRONT SEAT
Fold Flat Passenger Seat
10. Leg cover
11. Seat cushion front finisher
12. Passenger seat wiring harness
13. Power seat frame assembly
14. Seat cushion inner finisher
15. Seat belt buckle assembly
16. Leg cover
17. Seat cushion rear finisher
18. Manual seat frame assembly
19. Recline lever
20. Seat cushion rear finisher
21. Seatback board
22. Headrest holder with multi position
lock
23. Headrest holder
24. Seatback pad without side air bag
25. Seatback frame without side air bag
26. Damper assembly
27. Seatback heating element
LIIA2409E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст