Nissan Pathfinder (2008 year). Manual — part 615
TM-262
< DISASSEMBLY AND ASSEMBLY >
DISASSEMBLY
a.
2WD models
i.
Remove bolts for rear extension assembly and transmission
case.
• Self-sealing bolts (2)
ii.
Remove brackets (1) (VK56DE models only.)
iii.
Tap rear extension assembly with soft hammer.
iv.
Remove rear extension assembly (with needle bearing) from
transmission case.
b.
4WD models
i.
Remove adapter case to transmission case bolts and terminal
bracket (2).
• Self-sealing bolt (2)
ii.
Remove brackets (1) (VK56DE models only).
WCIA0562E
SCIA5028E
SCIA5029E
WCIA0563E
DISASSEMBLY
TM-263
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
iii.
Tap adapter case assembly using suitable tool.
iv.
Remove adapter case assembly (with needle bearing) from
transmission case.
v.
Remove gasket from transmission case.
44. Remove bearing race from output shaft.
45. Remove output shaft from transmission case by rotating left and
right.
SCIA5201E
SCIA5186E
SCIA5231E
SCIA5245E
SCIA5030E
TM-264
< DISASSEMBLY AND ASSEMBLY >
DISASSEMBLY
46. Remove parking gear from output shaft.
47. Remove seal rings from output shaft.
48. Remove needle bearing from transmission case.
49. Remove revolution sensor from transmission case.
CAUTION:
• Do not subject it to impact by dropping or hitting it.
• Do not disassemble.
• Do not allow metal filings or any foreign material to get on
the sensor's front edge magnetic area.
• Do not place in an area affected by magnetism.
50. Remove reverse brake snap ring using two flat-bladed screw-
drivers.
NOTE:
Press out snap ring from the transmission case oil pan side gap
using a flat-bladed screwdriver, and remove it using a another
screwdriver.
51. Remove reverse brake retaining plate from transmission case.
• Check facing for burns, cracks or damage. If necessary,
replace the plate.
SCIA5247E
SCIA5209E
SCIA5031E
SCIA2320E
SCIA5032E
DISASSEMBLY
TM-265
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
52. Remove N-spring from transmission case.
53. Remove reverse brake drive plates, driven plates and dish plate
from transmission case.
• Check facing for burns, cracks or damage. If necessary,
replace the plate.
54. Remove snap ring using suitable tool.
55. Remove spring retainer and return spring from transmission
case.
56. Remove seal rings from drum support.
SCIA5214E
SCIA2322E
SCIA2323E
SCIA2324E
SCIA3333E
TM-266
< DISASSEMBLY AND ASSEMBLY >
DISASSEMBLY
57. Remove needle bearing from drum support edge surface.
58. Remove reverse brake piston from transmission case using
compressed air. Refer to
.
CAUTION:
Care should be taken not to abruptly blow air. It makes the
piston incline, and as a result, it becomes hard to disas-
semble the pistons.
59. Remove D-rings from reverse brake piston.
60. Knock out retaining pin using suitable tool.
SCIA2796E
SCIA5047E
SCIA6330E
SCIA2328E
DISASSEMBLY
TM-267
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
61. Remove manual shaft retaining pin using suitable tool.
62. Remove manual plate (with parking rod) from manual shaft.
63. Remove parking rod from manual plate.
64. Remove manual shaft from transmission case.
65. Remove manual shaft oil seals using suitable tool.
CAUTION:
Do not scratch transmission case.
SCIA2329E
SCIA5715E
SCIA5220E
SCIA5716E
SCIA2331E
TM-268
< DISASSEMBLY AND ASSEMBLY >
DISASSEMBLY
66. Remove detent spring and spacer from transmission case.
67. Remove snap ring from transmission case using suitable tool.
68. Remove servo assembly (with return spring) from transmission
case.
69. Remove return spring from servo assembly.
70. Remove O-rings from servo assembly.
SCIA5248E
SCIA2333E
SCIA5679E
SCIA5717E
SCIA5719E
DISASSEMBLY
TM-269
< DISASSEMBLY AND ASSEMBLY >
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
71. Remove needle bearing (1) from rear extension (2WD models)
or adapter case (4WD models).
72. Remove parking actuator support from rear extension (2WD
models) or adapter case (4WD models).
73. Remove parking pawl (with return spring) and pawl shaft from
rear extension (2WD models) or adapter case (4WD models).
74. Remove return spring (1) from parking pawl (2).
SCIA6179J
SCIA3423E
SCIA3424E
SCIA6180J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст