Nissan Pathfinder (2008 year). Manual — part 467
IP-8
< SYMPTOM DIAGNOSIS >
SQUEAK AND RATTLE TROUBLE DIAGNOSES
Diagnostic Worksheet
INFOID:0000000001689411
LAIA0072E
SQUEAK AND RATTLE TROUBLE DIAGNOSES
IP-9
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
LAIA0071E
IP-10
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
ON-VEHICLE REPAIR
INSTRUMENT PANEL ASSEMBLY
Exploded View
INFOID:0000000001689422
Removal and Installation
INFOID:0000000001689412
INSTRUMENT PANEL
1.
Speaker grille RH/LH
2.
Cluster lid A
3.
Lower instrument panel LH
4.
Side ventilator grille RH/LH
5.
Combination meter
6.
Steering lock escutcheon
AWJIA0033ZZ
INSTRUMENT PANEL ASSEMBLY
IP-11
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
Removal
CAUTION:
Before servicing, turn the ignition switch off, disconnect both battery terminals, then wait at least 3
minutes.
1.
Disconnect the battery negative terminal.
2.
Remove the center console. Refer to
IP-10, "Removal and Installation"
.
3.
Remove the combination meter. Refer to
MWI-94, "Removal and Installation"
4.
Remove front pillar upper finisher. Refer to
INT-13, "Removal and Installation"
5.
Remove optical sensor. Refer to
EXL-114, "Removal and Installation"
.
6.
Remove AV control unit. Refer to
AV-134, "Removal and Installation"
7.
Remove display unit, if equipped. Refer to
AV-424, "Removal and Installation"
8.
Remove cluster lid D.
9.
Disconnect GPS antenna.
10. Remove the passenger air bag module. Refer to
SR-8, "Removal and Installation"
11. Remove the instrument stay RH/LH bolts.
12. Remove instrument panel and pad assembly.
• Disconnect all remaining harnesses.
Installation
Installation is in the reverse order of removal.
CLUSTER LID C
Removal
CAUTION:
Before servicing, turn the ignition switch off, disconnect both battery terminals, then wait at least 3
minutes.
1.
Disconnect the battery negative terminal.
2.
Select neutral, then remove shifter handle.
3.
Remove A/T finisher.
4.
Remove the center console bin screws and center console bin.
7.
Column cover upper
8.
Column cover lower
9.
Cluster lid C
10.
Center ventilator grill RH/LH
11.
Cluster lid D
12.
AV control unit
13.
Display unit
14.
A/C and AV switch assembly
15.
Lower glove box latch assembly
16.
Lower glove box
17.
Fuse block cover
18.
Lower instrument panel RH
19.
Lower glove box damper assembly
20.
Upper glove box door
21.
Upper glove box
22.
Instrument side finisher
23.
Instrument panel and pad assembly 24.
Passenger air bag module
25.
Knee protector brace
AWJIA0055ZZ
1.
Instrument panel
2.
Cluster lid C
A.
Cluster lid C Bolt
IP-12
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
5.
Remove cluster lid C bolts, then release the clips and remove cluster lid C.
6.
Disconnect electrical connectors and remove cluster lid C.
Installation
Installation is in the reverse order of removal.
CLUSTER LID D
Removal
1.
Remove A/T finisher.
2.
Remove lower instrument panel LH.
3.
Remove lower instrument panel RH.
4.
Remove cluster lid C.
5.
Disconnect the electrical connectors and remove cluster lid D.
Installation
Installation is in the reverse order of removal.
LOWER INSTRUMENT PANEL LH
Removal
1.
Remove front pillar lower finisher. Refer to
INT-13, "Removal and Installation"
.
2.
Remove lower instrument panel LH, using power tool.
3.
Pull rearward to release lower instrument panel LH.
4.
Disconnect lower instrument panel LH harness connectors.
Installation
Installation is in the reverse order of removal.
AWJIA0056ZZ
1.
Cluster lid D
A.
Cluster lid D screw
LIIA1744E
INSTRUMENT PANEL ASSEMBLY
IP-13
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
COMBINATION METER
Removal
1.
Disconnect the negative battery cable.
2.
Remove front pillar upper finisher. Refer to
INT-13, "Removal and Installation"
3.
Remove lower instrument panel LH.
4.
Remove steering lock escutcheon.
5.
Remove cluster lid A, using power tool.
6.
Remove combination meter, using power tool.
7.
Disconnect combination meter electrical connectors.
Installation
Installation is in the reverse order of removal.
A/T FINISHER
Removal
1.
Remove cup holder finisher.
2.
Release the shifter handle clip, then remove shifter handle.
3.
Pull up to release clips and disconnect the connectors, then remove the A/T finisher.
Installation
Installation is in the reverse order of removal.
LOWER INSTRUMENT PANEL RH AND LOWER GLOVE BOX
Removal
WIIA1053E
1.
Combination meter
2.
Combination meter screws
3.
Cluster lid A
4.
Ignition key lamp assembly
5.
Steering lock escutcheon
6.
Cluster lid A screws
AWJIA0057ZZ
1.
Cluster lid D
2.
Center console front base
3.
Cup holder finisher
4.
A/T finisher
⇐
Front
IP-14
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
1.
Disconnect the negative battery terminal.
2.
Remove front pillar lower finisher. Refer to
INT-13, "Removal and Installation"
.
3.
Remove lower instrument panel RH screws, using power tool.
4.
Remove lower instrument panel RH and lower glove box.
Installation
NOTE:
Install upper glove box before installing lower glove box.
Installation is in the reverse order of removal.
UPPER GLOVE BOX
Removal
1.
Remove lower instrument panel RH and lower glove box.
2.
Remove cluster lid C.
3.
Remove upper glove box screws, using power tool.
4.
Remove upper glove box.
Installation
Installation is in the reverse order of removal.
CENTER CONSOLE
Removal
1.
Remove lower instrument panel RH.
2.
Remove cup holder finisher.
3.
Remove A/T finisher.
4.
Remove center console screws.
5.
Disconnect electrical connectors and remove center console.
Installation
Installation is in the reverse order of removal.
WIIA1058E
CENTER CONSOLE ASSEMBLY
IP-15
< DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
DISASSEMBLY AND ASSEMBLY
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000001689423
Disassembly and Assembly
INFOID:0000000001689421
LOWER GLOVE BOX
Disassembly
1.
Remove fuse block cover.
2.
Remove damper hook.
3.
Remove lower glove box latch cover.
4.
Remove lower glove box latch assembly.
Assembly
Assembly is in the reverse order of disassembly.
UPPER GLOVE BOX
Disassembly
1.
Remove upper glove box door screws.
2.
Remove upper glove box door.
1.
Upper glove box
2.
Upper glove box door
3.
Lower instrument panel RH
4.
Fuse block cover
5.
Lower glove box latch assembly cover 6.
Lower glove box
7.
Lower glove box latch assembly
8.
Damper hook
9.
Lower glove box damper
WIIA1049E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст