Nissan Pathfinder (2008 year). Manual — part 402
FRONT FOG LAMP
EXL-115
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
FRONT FOG LAMP
Bulb Replacement
INFOID:0000000001572915
1.
Remove front portion of fender protector. Refer to
EXT-20, "Removal and Installation of Front Fender Pro-
2.
Disconnect fog lamp connector.
3.
Turn the bulb counterclockwise to remove it.
CAUTION:
• Do not touch the glass of bulb directly by hand. Keep
grease and other oily substances away from it. Do not
touch bulb by hand while it is lit or right after being turned
off. Burning may result.
• Do not leave bulb out of fog lamp reflector for a long time
because dust, moisture smoke, etc. may affect the perfor-
mance of fog lamp. When replacing bulb, be sure to
replace it with new one.
Removal and Installation
INFOID:0000000001572914
FRONT FOG LAMP
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.
CAUTION:
• Do not leave fog lamp assembly without bulb for a long period of time. Dust, moisture, smoke, etc.
entering the fog lamp body may affect the performance. Remove the bulb from the headlamp assem-
bly just before replacement bulb is installed.
• Grasp only the plastic base when handling the bulb. Never touch the glass envelope. Touching the
glass could significantly affect the bulb life and/or fog lamp performance.
Removal
1.
Remove front portion of fender protector. Refer to
EXT-20, "Removal and Installation of Front Fender Pro-
2.
Disconnect fog lamp connector.
3.
Remove fog lamp screws and pull fog lamp rearward out of front
bumper.
Installation
Installation is in the reverse order of removal.
LKIA0573E
LKIA0574E
EXL-116
< REMOVAL AND INSTALLATION >
LIGHTING & TURN SIGNAL SWITCH
LIGHTING & TURN SIGNAL SWITCH
Removal and Installation
INFOID:0000000001572927
REMOVAL
1.
Remove instrument lower cover LH. Refer to
.
2.
Remove steering column cover.
3.
Disconnect the lighting and turn signal switch connector.
4.
While pressing tabs, pull lighting and turn signal switch toward
driver door and release from the steering column.
INSTALLATION
Installation is in the reverse order of removal.
LKIA0013E
HAZARD SWITCH
EXL-117
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HAZARD SWITCH
Removal and Installation
INFOID:0000000001572912
REMOVAL
1.
Remove cluster lid C. Refer to
2.
Disconnect the hazard switch connector.
3.
Remove the screws and remove the hazard switch.
INSTALLATION
Installation is in the reverse order of removal.
EXL-118
< REMOVAL AND INSTALLATION >
HIGH-MOUNTED STOP LAMP
HIGH-MOUNTED STOP LAMP
High-Mounted Stop Lamp
INFOID:0000000001572911
BULB REPLACEMENT
The high-mounted stop lamp bulbs are not serviceable.
REMOVAL AND INSTALLATION
Removal
1.
Remove back door window garnish.
2.
Disconnect high-mounted stop lamp connector.
3.
Remove nuts and remove high-mounted stop lamp.
Installation
Installation is in the reverse order of removal.
LKIA0576E
LICENSE PLATE LAMP
EXL-119
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
LICENSE PLATE LAMP
Bulb Replacement
INFOID:0000000001572909
LICENSE PLATE LAMP
Removal
1.
Remove back door finisher. Refer to
EXT-19, "Removal and Installation"
2.
Turn bulb socket counterclockwise and remove bulb socket.
3.
Remove license plate lamp bulb.
Installation
Installation is in the reverse order of removal.
Removal and Installation
INFOID:0000000001572910
LICENSE PLATE LAMP
Removal
1.
Remove license lamp finisher. Refer to
EXT-19, "Removal and Installation"
.
2.
Disconnect license plate lamp harness connector.
3.
Remove license plate lamp screw and remove license plate lamp.
Installation
Installation is in the reverse order of removal.
EXL-120
< REMOVAL AND INSTALLATION >
REAR COMBINATION LAMP
REAR COMBINATION LAMP
Bulb Replacement
INFOID:0000000001572891
REMOVAL
1.
Remove rear combination lamp bolts.
2.
Pull rear combination lamp to remove from the vehicle.
3.
Turn bulb socket counterclockwise and unlock it.
4.
Remove bulb.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
INFOID:0000000001572892
REMOVAL
1.
Remove rear combination lamp bolts.
2.
Pull rear combination lamp to remove from the vehicle.
3.
Disconnect rear combination lamp connector.
INSTALLATION
Installation is in the reverse order of removal.
WKIA4168E
BULB SPECIFICATIONS
EXL-121
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
SERVICE DATA AND SPECIFICATIONS (SDS)
BULB SPECIFICATIONS
Headlamp
INFOID:0000000001572888
*: Always check with the Parts Department for the latest parts information.
Exterior Lamp
INFOID:0000000001572889
*: Always check with the Parts Department for the latest parts information.
Item
Wattage (W)*
Low/High
55/65
Item
Wattage (W)*
Front combination lamp
Turn signal lamp/parking lamp
28/8
Side marker
3.8
Rear combination lamp
Stop/Tail lamp
27/8
Turn signal lamp
27
Back-up lamp
18
Front fog lamp
55
License plate lamp
5
High-mounted stop lamp
*
EXT-1
BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY
C
D
E
F
G
H
I
J
L
M
SECTION
EXT
A
B
EXT
N
O
P
CONTENTS
EXTERIOR
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
Service Notice . . . . . . . . . . . . . . ...
PREPARATION . . . . . . . . . . .
PREPARATION . . . . . . . . . . . . ...
Special Service Tool . . . . . . . . . . . .....
Commercial Service Tool . . . . . . . . . . ..
ON-VEHICLE MAINTENANCE . . . . . .
SQUEAK AND RATTLE TROUBLE DIAG-
NOSES . . . . . . . . . . . . . . . .
Work Flow . . . . . . . . . . . . . . . .....
Generic Squeak and Rattle Troubleshooting . . ....
Diagnostic Worksheet . . . . . . . . . . . ...
CLIP AND FASTENER . . . . . . . . . ...
Clip and Fastener . . . . . . . . . . . . .
ON-VEHICLE REPAIR . . . . . . . . .
FRONT BUMPER . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . . .
REAR BUMPER . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
FRONT GRILLE . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
COWL TOP . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . . .
FRONT FENDER . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . . .
LICENSE LAMP FINISHER . . . . . . . ..
Removal and Installation . . . . . . . . . . .
FENDER PROTECTOR . . . . . . . . .
Component . . . . . . . . . . . . . . . ..
Removal and Installation of Front Fender Protec-
tor . . . . . . . . . . . . . . . . . . .
Removal and Installation of Rear Fender Protector
.
RUNNING BOARDS . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
ROOF RACK . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
DOOR OUTSIDE MOLDING . . . . . . . .
Removal and Installation . . . . . . . . . . .
SIDE GUARD MOLDING . . . . . . . . ..
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст