Nissan Pathfinder (2008 year). Manual — part 457
INTERIOR ROOM LAMP CONTROL SYSTEM
INL-7
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
INTERIOR LAMP BATTERY SAVER CONTROL
If an interior lamp is left ON and does not turn OFF even when the doors are closed, the BCM turns off power
to the interior lamps automatically to save the battery 30 minutes after the ignition switch is turned OFF.
The BCM controls power and ground to all interior lamps.
After the battery saver system turns the lamps OFF, the lamps will illuminate again when
• a signal is received from an Intelligent Key or main power window and door lock/unlock switch, or when the
front door LH lock assembly (key cylinder switch) is locked or unlocked
• a door is opened or closed
• the Intelligent Key is removed from or inserted into the key slot.
The Interior lamp battery saver control time period can be changed with the function setting of CONSULT-III.
Component Parts Location
INFOID:0000000001712564
1.
BCM M18, M19, M20 (view with instru-
ment panel removed)
2.
• Key switch and ignition knob switch
(with I-Key) M66
• Key switch (without I-key) M77
3.
Glass hatch ajar switch D503
4.
Front door switch
LH B8
RH B108
5.
Rear door switch
LH B18
RH B116
6.
Back door cinching latch unit (door ajar
switch) D502
ALLIA0646ZZ
INL-8
< FUNCTION DIAGNOSIS >
INTERIOR ROOM LAMP CONTROL SYSTEM
Component Description
INFOID:0000000001712565
7.
• Personal lamp 2nd row (with map
lamps) R10
• Room lamp 2nd row (without map
lamps) R12
8.
Front room/map lamp assembly R9
9.
Vanity lamp
LH B80
RH B81
10. Ignition keyhole illumination M150
11. Cargo lamp R11
Part name
Description
BCM
Provides power and ground and controls timer functions for the
interior room lamps, step lamps and cargo lamp.
Key switch and ignition knob switch (with I-Key)
Provides key in ignition status to the BCM.
Key switch and lock solenoid (without I-Key)
Door switches
Provides door OPEN/CLOSED status to the BCM.
Glass hatch switch
Provides glass hatch OPEN/CLOSED status to the BCM.
Back door latch (with power back door)
Provides back door OPEN/CLOSED status to the BCM.
Back door switch (without power back door)
Power window and door lock/unlock switch RH
Provides door lock/unlock position switch RH status to the BCM.
Main power window and door lock/unlock switch [front door lock
assembly LH (key cylinder switch)].
Provides door lock/unlock position switch LH status to the BCM.
ILLUMINATION CONTROL SYSTEM
INL-9
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
ILLUMINATION CONTROL SYSTEM
System Diagram
INFOID:0000000001712566
System Description
INFOID:0000000001712567
The illumination lamps operation is dependent upon the position of the lighting switch (combination switch).
When the lighting switch is placed in the 1ST or 2ND position (or if the auto light system is activated) the BCM
(body control module) receives input requesting the parking lamps to illuminate. This input is communicated to
the IPDM E/R (intelligent power distribution module engine room) via the CAN communication lines. The CPU
(central processing unit) of the IPDM E/R controls the tail lamp relay coil. When energized, this relay directs
power to the parking and illumination lamps, which then illuminate.
BATTERY SAVER CONTROL
When the lighting switch (combination switch) is in the 1ST or 2ND position and the ignition switch is turned
from ON or ACC to OFF, the battery saver control feature is activated. Under this condition, the illumination
lamps remain illuminated for 30 minutes unless the lighting switch position is changed. If the lighting switch
position is changed, then the illumination lamps are turned off after a 30 second delay. When the lighting
switch is turned from OFF to 1ST or 2ND position (or if auto light system is activated) after illumination lamps
have been turned off by the battery saver control, the illumination lamps illuminate again.
ALLIA0424GB
INL-10
< FUNCTION DIAGNOSIS >
ILLUMINATION CONTROL SYSTEM
Component Parts Location
INFOID:0000000001712568
Component Description
INFOID:0000000001712569
1.
IPDM E/R E122, E124
2.
Combination switch M28
3.
Combination meter M24
4.
Illumination control switch (built into
combination meter)
5.
BCM M18, M20 (view with instrument
panel removed)
WKIA4973E
Part name
Description
BCM
The BCM monitors the lighting switch position with the combina-
tion switch reading function. The BCM requests, via CAN com-
munication, that the IPDM E/R activate the tail lamp relay.
IPDM E/R
The IPDM E/R activates the tail lamp relay based on inputs re-
ceived from the BCM via the CAN communication network.
Combination meter (illumination control switch)
The illumination control switch is a part of the combination meter.
The combination meter controls illumination intensity by varying
ground to the illumination lamps based on the illumination control
switch position.
Combination switch
The combination switch provides input to the BCM about the light-
ing switch position.
DIAGNOSIS SYSTEM (BCM)
INL-11
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT-III Function
INFOID:0000000001712570
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
INT LAMP
INT LAMP : CONSULT-III Function
INFOID:0000000001712571
WORK SUPPORT
BCM diagnostic
test item
Diagnostic mode
Description
Inspection by part
WORK SUPPORT
Supports inspections and adjustments. Commands are transmitted to the BCM for
setting the status suitable for required operation, input/output signals are received
from the BCM and received data is displayed.
DATA MONITOR
Displays BCM input/output data in real time.
ACTIVE TEST
Operation of electrical loads can be checked by sending drive signal to them.
SELF-DIAG RESULTS
Displays BCM self-diagnosis results.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
ECU PART NUMBER
BCM part number can be read.
CONFIGURATION
Performs BCM configuration read/write functions.
JPLIA0093GB
Service item
Setting item
Setting
SET I/L D-UNLCK INTCON
ON
With the interior room lamp timer function
OFF
Without the interior room lamp timer function
ROOM LAMP ON TIME SET
MODE 1
0.5 sec.
Sets the interior room lamp gradual brightening time.
MODE 2
1 sec.
MODE 3
2 sec.
MODE 4
3 sec.
MODE 5
4 sec.
MODE 6
5 sec.
MODE 7
0 sec.
INL-12
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
DATA MONITOR
ACTIVE TEST
ROOM LAMP OFF TIME SET
MODE 1
0.5 sec.
Sets the interior room lamp gradual dimming time.
MODE 2
1 sec.
MODE 3
2 sec.
MODE 4
3 sec.
MODE 5
4 sec.
MODE 6
5 sec.
MODE 7
0 sec.
Service item
Setting item
Setting
Monitor item
[Unit]
Description
IGN ON SW
[ON/OFF]
The switch status input from ignition switch
KEY ON SW
[ON/OFF]
Key switch status input from key slot
DOOR SW-DR
[ON/OFF]
The switch status input from front door switch LH
DOOR SW-AS
[ON/OFF]
The switch status input from front door switch RH
DOOR SW-RR
[ON/OFF]
The switch status input from rear door switch RH
DOOR SW- RL
[ON/OFF]
The switch status input from rear door switch LH
BACK DOOR SW
[ON/OFF]
The switch status input from back door switch
KEY CYL LK-SW
[ON/OFF]
Lock switch status received from key cylinder switch by power window serial link
KEY CYL UN-SW
[ON/OFF]
Unlock switch status received from key cylinder switch by power window serial link
CDL LOCK SW
[ON/OFF]
Lock switch status received from door lock/unlock switch by power window serial link
CDL UNLOCK SW
[ON/OFF]
Unlock switch status received from door lock/unlock switch by power window serial
link
I-KEY LOCK
[ON/OFF]
Lock signal status received from remote keyless entry receiver
I-KEY UNLOCK
[ON/OFF]
Unlock signal status received from remote keyless entry receiver
KEYLESS LOCK
[ON/OFF]
Unlock signal status received from remote keyless entry receiver
KEYLESS UNLOCK
[ON/OFF]
Unlock signal status received from remote keyless entry receiver
Test item
Operation
Description
INT LAMP
ON
Outputs the interior room lamp control signal to turn the front room/map lamp, per-
sonal lamps (Map lamp switch is in DOOR position) and puddle lamps (if equipped)
ON.
OFF
Stops the interior room lamp control signal to turn the front room/map lamp, personal
lamps (Map lamp switch is in DOOR position) and puddle lamps (if equipped) OFF.
DIAGNOSIS SYSTEM (BCM)
INL-13
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
BATTERY SAVER
BATTERY SAVER : CONSULT-III Function
INFOID:0000000001712572
WORK SUPPORT
DATA MONITOR
IGN ILLUM
ON
Outputs the ignition keyhole illumination signal to turn the ignition keyhole illumination
ON.
OFF
Stops the ignition keyhole illumination signal to turn the ignition keyhole illumination
OFF.
STEP LAMP TEST
ON
Test item is listed, but does not apply to this vehicle.
OFF
LUGGAGE LAMP TEST
ON
Outputs the cargo lamp control signal to turn cargo lamp ON.
OFF
Stops the cargo lamp control signal to turn cargo lamp OFF.
Test item
Operation
Description
Service item
Setting item
Setting
ROOM LAMP TIMER SET
MODE 1
(ON)
Interior room lamp timer activates with synchronizing all doors.
MODE 2
(OFF)
Interior room lamp timer activates with synchronizing the front door LH
only.
Monitor item
[Unit]
Description
IGN ON SW
[ON/OFF]
The switch status input from ignition switch
KEY ON SW
[ON/OFF]
Key switch status input from key slot
DOOR SW-DR
[ON/OFF]
The switch status input from front door switch LH
DOOR SW-AS
[ON/OFF]
The switch status input from front door switch RH
DOOR SW-RR
[ON/OFF]
The switch status input from rear door switch RH
DOOR SW- RL
[ON/OFF]
The switch status input from rear door switch LH
BACK DOOR SW
[ON/OFF]
The switch status input from back door switch
KEY CYL LK-SW
[ON/OFF]
Lock switch status received from key cylinder switch by power window serial link
KEY CYL UN-SW
[ON/OFF]
Unlock switch status received from key cylinder switch by power window serial link
CDL LOCK SW
[ON/OFF]
Lock switch status received from door lock/unlock switch by power window serial link
CDL UNLOCK SW
[ON/OFF]
Unlock switch status received from door lock/unlock switch by power window serial
link
I-KEY LOCK
[ON/OFF]
Lock signal status received from remote keyless entry receiver
I-KEY UNLOCK
[ON/OFF]
Unlock signal status received from remote keyless entry receiver
INL-14
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST
KEYLESS LOCK
[ON/OFF]
Unlock signal status received from remote keyless entry receiver
KEYLESS UNLOCK
[ON/OFF]
Unlock signal status received from remote keyless entry receiver
Monitor item
[Unit]
Description
Test item
Operation
Description
BATTERY SAVER
ON
Outputs the battery saver output/power supply to turn the interior lamps ON.
OFF
Stops the battery saver output/power supply to turn the interior lamps OFF.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст