Nissan Pathfinder (2008 year). Manual — part 176
DOOR
DLK-309
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
1.
Open and support the back door.
2.
Slightly loosen the hinge nuts.
3.
Reposition the door as necessary and tighten the nuts.
4.
Confirm the adjustment. Repeat as necessary to obtain the desired fit.
Striker adjustment
BODY SIDE DOORS
1.
Back door assembly
2.
Back door hinge
3.
Tail lamp assembly
4.
Rear bumper fascia
5.
Roof
6.
Side window glass
a.
7.2
±
2.0 mm (0.28
±
0.06 in)
b.
6.0
±
1.5 mm (0.24
±
0.06 in)
c.
2.0
±
2.0 mm ( 0.08
±
0.08 in)
d.
1.0
±
1.5 mm (0.04
±
0.06 in)
e.
8.0
±
1.5 mm (0.31
±
0.06 in)
f.
5.3
±
2.0 mm (0.21
±
0.08 in)
g.
0.8
±
2.0 mm (0.03
±
0.08 in)
h.
0.8
±
1.0 mm (0.03
±
0.04 in)
j.
2.0
±
1.0 mm (0.08
±
0.04 in)
WIIA0733E
DLK-310
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
DOOR
1.
Adjust the striker so that it becomes parallel with the lock inser-
tion direction.
BACK DOOR
1.
Adjust the striker so that it becomes parallel with the lock inser-
tion direction.
Removal and Installation
INFOID:0000000001563862
FRONT DOOR
CAUTION:
• When removing and installing the door assembly, support the door with a jack and shop cloth to pro-
tect the door and body.
• When removing and installing door assembly, be sure to carry out the fitting adjustment.
• Check the hinge rotating part for poor lubrication. If necessary, apply "body grease".
1.
Remove the front door glass and regulator. Refer to
GW-14, "Front Door Glass Regulator"
2.
Remove the door harness.
3.
Remove the check link bolt from the hinge pillar.
4.
Remove the door-side hinge nuts, and the door assembly.
Installation is in the reverse order of removal.
WIIA0734E
WIIA0735E
Check link to hinge pillar
bolt
14.7 N·m (1.5 kg-m, 11 ft-lb)
LIIA1726E
Door hinge nuts
24.5 N·m (2.5 kg-m, 18 ft-lb)
LIIA1727E
DOOR
DLK-311
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REAR DOOR
1.
Remove the door finisher. Refer to
INT-10, "Removal and Installation"
.
2.
Remove the inner seal.
3.
Remove the rear door glass and regulator. Refer to
GW-18, "Rear Door Glass Regulator"
.
4.
Remove the door harness.
5.
Remove the check link bolt from the hinge pillar.
6.
Remove the door-side hinge nuts, and remove the door assembly.
Installation is in the reverse order of removal.
BACK DOOR
1.
Remove the glass hatch. Refer to
GW-23, "Removal and Installation"
.
2.
Remove the license lamp finisher. Refer to
EXT-19, "Removal and Installation"
.
3.
Remove the back door lock assembly. Refer to
DLK-317, "Component Structure"
4.
Remove the back door wire harness.
5.
Remove the rear washer nozzle and hose from the back door. Refer to
CAUTION:
Two technicians should be used to avoid damaging the back door during removal.
6.
Support the back door.
7.
Remove the back door stays.
Check link to hinge pillar
bolt
14.7 N·m (1.5 kg-m, 11 ft-lb)
LIIA1726E
Door hinge nuts
24.5 N·m (2.5 kg-m, 18 ft-lb)
LIIA1727E
DLK-312
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
DOOR
8.
Remove the door side nuts and the back door assembly.
Installation is in the reverse order of removal.
• Align the back door. Refer to
WIIA1056E
FRONT DOOR LOCK
DLK-313
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FRONT DOOR LOCK
Component Structure
INFOID:0000000001563863
Removal and Installation
INFOID:0000000001586943
REMOVAL
1.
Remove the front door window regulator. Refer to
GW-14, "Front Door Glass Regulator"
2.
Remove door side grommet, and remove door key cylinder
assembly (driver side) or outside handle escutcheon (passenger
side) bolts (TORX T30) from grommet hole.
3.
While pulling the outside handle (1), remove door key cylinder
assembly or escutcheon (2).
1.
Grommet
2.
Front door striker
3.
Door lock assembly
4.
Outside handle cable
5.
Inside handle assembly
6.
Inside handle cable
7.
Door lock cable
8.
Key cylinder rod (Driver side only)
9.
Door key cylinder
10. Outside handle bracket
11.
Front gasket
12. Outside handle
13. Door key cylinder assembly (Driver
side) Outside handle escutcheon
(Passenger side)
14. Rear gasket
⇐
Vehicle front
WIIA0736E
PIIA3553E
ALKIA0956ZZ
DLK-314
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
FRONT DOOR LOCK
4.
If equipped, separate the door key cylinder rod from the door key cylinder assembly.
5.
While pulling outside handle (1), slide toward rear of vehicle (2)
to remove outside handle.
6.
Remove the front gasket (1) and rear gasket (2).
7.
Remove the TORX bolts (T30), remove the door lock assembly.
8.
While pulling outside handle bracket, slide toward rear of vehicle
to remove outside handle bracket and door lock assembly as
shown.
9.
Disconnect the door lock actuator electrical connector.
ALKIA0957ZZ
ALKIA0924ZZ
PIIA1090E
PIIA3558E
FRONT DOOR LOCK
DLK-315
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
10. Separate the outside handle cable connection from the outside
handle bracket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
To install the key cylinder rod, be sure to rotate the key cylinder rod holder until a click is felt.
Disassembly and Assembly
INFOID:0000000001563865
DOOR KEY CYLINDER ASSEMBLY
Release the key cylinder escutcheon pawls to remove the door key cylinder.
PIIA5059E
1.
Door key cylinder assembly
2.
Door key cylinder escutcheon
3.
Door key cylinder
⇐
Pawl
WIIA1057E
DLK-316
< ON-VEHICLE REPAIR >
[WITHOUT INTELLIGENT KEY SYSTEM]
REAR DOOR LOCK
REAR DOOR LOCK
Component Structure
INFOID:0000000001563866
Removal and Installation
INFOID:0000000001563867
REMOVAL
1.
Remove the rear door window regulator. Refer to
GW-18, "Rear Door Glass Regulator"
.
2.
Remove door grommets, and remove outside handle nuts from the hole.
3.
Remove outside handle.
4.
Disconnect the outside handle cable connection.
5.
Remove the inside door handle.
6.
Disconnect the door lock and inside door handle cables from the inside door handle.
7.
Disconnect the door lock actuator connector and remove the assembly.
INSTALLATION
Installation is in the reverse order of removal.
1.
Outside door handle
2.
Rear door striker
3.
Rear door lock assembly
4.
Outside door handle cable
5.
Inside door handle cable
6.
Inside door handle assembly
7.
Door lock cable
⇐
Vehicle front
WIIA0737E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст