Nissan Rogue (2022 year). Manual in english — page 6

Service application

A separately purchased NissanConnect®
Services subscription is required. For de-
tailed information, contact a NISSAN deal-
e r

o r

r e f e r

t o

t h e

f o l l o w i n g

NissanConnect® Services website:

www.nissan.com.mx/connect

INFO:

If the vehicle is owned by another person
and is resold, the subscription for this
service must be canceled and all data
stored on the device must be deleted.

Operating tips

WARNING

.

Use the NissanConnect® Services
after stopping your vehicle in a
safe location. If you have to use the
NissanConnect® Services while
driving, exercise extreme caution
at all times so full attention may be
given to vehicle operation.

.

If you are unable to devote full
attention to vehicle operation
while talking with the NissanCon-
nect® Services, pull off the road to
a safe location and stop your

vehicle.

.

Do not use the NissanConnect® Ser-
vices with the engine stopped. Doing
so may discharge the vehicle battery.

.

The NissanConnect® Services cannot
be used under the following condi-
tions:

— The NissanConnect® Services sub-

scription has expired.

— The vehicle is outside the area

where the cellular network service
is receivable.

— The vehicle is in a location with poor

signal reception such as tunnels,
underground parking garages, be-
hind buildings or in mountainous
areas.

— The line is busy.

— The TCU (Telematics Control Unit) or

other systems of your vehicle are
not working properly.

— The NissanConnect® Services net-

work system is disabled.

.

Communication with the NissanCon-
nect® Services Data Center is related
to the data communication mode and
may cause occasional difficulty in

receiving signals, and the signal recei-
vable area may be limited compared
to regular mobile phones.

.

You may hear clicks or experience
interruptions while speaking with the
NissanConnect® Services Response
Specialists. This is due to a shift in the
connection zone and is not a malfunc-
tion.

.

Depending on the line used, the sound
volume may decrease. Adjust the vo-
lume as necessary.

.

Received sounds may be distorted or
ambient noise may sound like voices
of a crowd. This is due to the use of the
digital line and is not a malfunction.

.

You may hear your own voice from the
speaker when talking with the Nissan-
Connect® Services Response Specia-
lists due to a network disturbance.
When this occurs, reconnect the line
after a few minutes or at a different
location.

.

This vehicle incorporates a communi-
cation device that is called a TCU
(Telematics Control Unit). The commu-
nication connection between this unit
and the NissanConnect® Services Data
Center allows for various services.
When the system connects to the

5. Information

5-17

5. Information

NissanConnect® Services Data Center,
an antenna icon will appear on the
screen. Use the service in a location
where the symbol representing good
signal reception appears on the
screen.

: When the signal reception is good
: When the signal reception is bad

.

The NissanConnect® Services use the
TCU (Telematics Control Unit) for com-
munications. Even if the signal
strength bar of the in-vehicle data
communication module indicates
good reception, connection to the
NissanConnect® Services Data Center
may be disabled. This does not indi-
cate a malfunction. Operate the sys-
tem again after a few minutes.

NISSANCONNECT® SERVICES ME-
NUS

With NissanConnect® Services, various
information can be received and dis-
played on the screen. The information
can also be announced by the system.

1.

Push

<MENU>

and then touch [Info].

2.

Touch [NissanConnect Services].

3.

Select an item from the NissanCon-
nect® Services menu screens.

Available items may vary depending on

models, specifications and software ver-
sions. Items displayed on the screen may
not function depending on various condi-
tions.

Available items

Content

[Call Nissan Assis-
tance]

The system con-
nects to the Nissan-
Connect® Services
center. Various ser-
vices to support your
driving are available
by answering the In-
teractive Voice
Menu.

“Connecting to
Interactive
Voice Menu”
(page 5-18)

[History]

Accesses the mes-
sages sent to the
vehicle from the Nis-
sanConnect® Ser-
vices Data Center.

“History”
(page 5-19)

[NissanConnect
Services Settings]

NissanConnect® Ser-
vices settings can be
changed.

“NissanConnec-
t® Services set-
tings”
(page 5-22)

Connecting to Interactive Voice
Menu

Various services to support your driving
are available by using the Interactive
Voice Menu. For more details, refer to the
NissanConnect® Services website or con-
tact the NissanConnect® customer sup-
port line.

NissanConnect® Services website:

www.nissan.com.mx/connect

NissanConnect® customer support
line:

01-800 9647726

1.

Push

<MENU>

and touch [Info] on the

Launch Bar.

2.

Touch [NissanConnect Services].

3. Touch [Call Nissan Assistance].

4. The system connects to the Nissan-

Connect® Services center and menu
options will be announced. Speak your
preferred option.

5-18

INFO:

.

You can also connect to the Nissan-
Connect® Services Interactive Voice
Menu by touching [

]

on the map.

.

After selecting [Call Nissan Assistance],
it may take some time until the system
initiates connection, depending on the
technical environment and whether
the TCU (Telematics Control Unit) is
being used by other services.

.

To avoid disconnecting the line, do not
turn off the engine.

History

Messages received from the NissanCon-
nect® Services Data Center are displayed.

1.

Push

<MENU>

and then touch [Info].

2.

Touch [NissanConnect Services].

3. Touch [History].

4. A message list is displayed. Touch

preferred message from the list.

INFO:

.

Touch [Stop] during communication
with the NissanConnect® Services
Data Center to cancel the connection.

.

A message is displayed when the
communication is disconnected while
downloading information due to a
poor communication status. Select
[Yes] to restart the download.

.

Laws in some jurisdictions may restrict
the use of “Text-to-Speech”. Check
local regulations before using this
feature.

.

Some terminology such as personal
names, place names, special terms,
symbols, etc. may not be announced
correctly. This is not a malfunction.

.

The system will pause announce-
ments when interrupted by the voice
guidance given by the navigation sys-
tem (if so equipped). When the voice
guidance finishes, the system will re-
start the announcement.

.

When the system is making announce-
ments, the volume can be adjusted by
turning

<VOL/PUSH POWER>

/

<

/VOL>

/

<VOL/PUSH

>

.

.

The selected content is read out while
the vehicle is being driven, or if parked,
you can read the content on the
display.

.

Content settings can be made using
the NissanConnect® Services website.
For more details, refer to the Nissan-
Connect® Services website or contact
the NissanConnect® customer sup-
port line.

NissanConnect® Services website:

www.nissan.com.mx/connect

NissanConnect® customer support
line:

01-800 9647726

EMERGENCY SUPPORT

NissanConnect® Services provides various
services to support dealing with emer-
gencies of the subscribed vehicle and the
driver.

For example, in case of an illness or
serious injury, you can seek support by
pushing the in-vehicle Emergency Call
(SOS) button and connecting to the Nis-

5. Information

5-19

5. Information

sanConnect® Services Response Center.
The NissanConnect® Services Response
Center can specify the location of the
vehicle via GNSS, and the information will
be sent to the police or other agencies as
needed.

For information about other NissanCon-
nect® Services emergency support related
services, refer to the NissanConnect®
Services website or contact the Nissan-
Connect® customer support line.

NissanConnect® Services website:

www.nissan.com.mx/connect

NissanConnect® customer support
line:

01-800 9647726

WARNING

.

Please note that the Automatic
Collision Notification service (if so
equipped) and Emergency Call
function cannot be used in the
following conditions:

— Emergency functions and ser-

vices will not be available with-
out a paid subscription to
NissanConnect® Services.

— The NissanConnect® Services

network system is disabled.

— The vehicle moves outside the

service area where the TCU
(Telematics Control Unit) is con-
nected to the system.

— The vehicle is outside the area

where the cellular network ser-
vice is receivable.

— The vehicle is in a location with

poor signal reception such as
tunnels, underground parking
garages, behind buildings or in
mountainous areas.

— The line is busy.

— The TCU (Telematics Control

Unit) or other systems of your
vehicle are not working properly.

— It may not be possible to make

an emergency call depending on
the severity of a collision and/or
emergency.

.

Park the vehicle in a safe location
and set the parking brake before
operating the Emergency Call
(SOS) button.

.

Only use this service in case of an
emergency. There may be a pen-
alty for inappropriate use of the

service.

.

Radio waves could adversely af-
fect electric medical equipment.
Individuals who use a pacemaker
should contact the device manu-
facturer regarding any possible
effects before using the system.

.

The TCU (Telematics Control Unit)
antenna is installed inside the
upper central part of the instru-
ment panel. An occupant should
not get any closer to the antenna
than specified by the pacemaker
manufacturer. The radio waves
from the TCU antenna may ad-
versely affect the operation of the
pacemaker while using the Nis-
sanConnect® Services.

5-20

Making an emergency call

The Emergency Call (SOS) button is lo-
cated near the map light.

1.

Push the Emergency Call (SOS) button.

2.

When the line is connected, speak to
the Response Specialist.

If you want to cancel the emergency call,
push and hold the Emergency Call (SOS)
button for a few seconds.

INFO:

.

After the Emergency Call (SOS) button
is pushed, it may take some time until
the system initiates connection, de-
pending on the technical environment
and whether the TCU (Telematics
Control Unit) is being used by other
services.

.

An indicator light on the Emergency
Call (SOS) button shows the readiness
of the emergency support system. If
the indicator light is not illuminated,
pushing the Emergency Call (SOS)
button does not connect your vehicle
to the Response Specialist.
The indicator light blinks while con-
nected to the NissanConnect® Ser-
vices Response Center.

.

Even when the indicator light is illumi-
nated, connection to the NissanCon-
nect® Services Response Center may
not be possible. If this occurs in an
emergency situation, contact the
authorities by other means.

.

To avoid disconnecting the line, do not
turn off the engine.

5. Information

5-21

5. Information

NISSANCONNECT® SERVICES SETTINGS

The NissanConnect® Services setting can be changed. Available menus may vary depending on models, specifications and software
versions. Menus displayed on the screen may not function depending on various conditions.

1.

Push

<MENU>

.

2.

Touch [Info] on the Launch Bar.

3.

Touch [NissanConnect Services].

4. Touch [NissanConnect Services Settings].

INFO:

[NissanConnect Services Settings] can also be accessed from [NissanConnect Services] on the settings screen.

“Settings menu” (page 2-13)

Menu

Action

[Delete All Information Feed History]

Deletes contents of information feeds.

[Vehicle Data Sharing]

[Share Vehicle Information]

Turns the vehicle information sharing function on/off.

[Delete Shared Vehicle Data]

Deletes the shared vehicle information.

[Unit ID Information]

Displays the Unit ID, TCU (Telematics Control Unit) ID, SIM ID and
VIN Information necessary for user registration.

[Reset all NissanConnect Svcs. Settings to Default]

All NissanConnect® Services settings are returned to default.

[Vehicle Data Transmission Setting]

When [OK] is touched, data transmission to the NissanConnect®
Services Data Center is enabled. Touch [Decline] to disable the
NissanConnect® Services, Premium Traffic, etc.

5-22

SiriusXM® TRAVEL LINK (if so
equipped)

This service provides real-time informa-
tion regarding current weather, fuel
prices, parking information, sports scores,
movie times and stock tickers.

It is necessary to subscribe to use the
SiriusXM® Travel Link information.

The SiriusXM® Travel Link is broadcast to
the vehicle by SiriusXM® Satellite Radio.

WARNING

SiriusXM® Travel Link information is
not a substitute for attentive driving.
Weather conditions change con-
stantly and emergency situations
can arise without warning. Relying
only on SiriusXM® Travel Link informa-
tion could result in serious personal
injury.

VIEWING SiriusXM® TRAVEL LINK

SiriusXM® Satellite Radio and SiriusXM®
Travel Link subscriptions are sold sepa-
rately or as a package, and are continuous
until you call SiriusXM® to cancel. See
SiriusXM® Customer Agreement for com-
plete terms at www.siriusxm.com (for U.S.)

o r w w w . s i r i u s x m . c a ( f o r C a n a d a ) .
SiriusXM® Travel Link is available in select
markets.

For more information, refer to the Sir-
iusXM® website or call Listener Care.

SiriusXM® website:

For U.S.

www.siriusxm.com/travellink

For Canada

https://www.siriusxm.ca/siriusxm-
infotainment (English)

https://www.siriusxm.ca/fr/siriusxm-
infodivertissement (French)

Listener Care:

For U.S.

1-877-447-0011

For Canada

1-877-438-9677

INFO:

.

If a subscription is not active for
SiriusXM® Travel Link, a message ap-
pears on the display and information
will not be available.

.

SiriusXM® Travel Link information
(such as Weather, Fuel, Parking, etc.)

is available only for areas that the
SiriusXM® provides this information.

.

Not all vehicles or devices are capable
of receiving all services offered by
SiriusXM®. Data displays and individual
product availability vary by vehicle
hardware. Current information and
features may not be available in all
locations, or on all receivers. SiriusXM®
is not responsible for any errors or
inaccuracies in the data services or
their use in the vehicle.

5. Information

5-23

5. Information

USING SiriusXM® TRAVEL LINK

1.

Push

<MENU>

.

2.

Touch [Info] on the Launch Bar to display the SiriusXM® Travel Link menus.

Menu item

Result

[SXM Weather]

[Current Conditions]

Current, hourly or 5-day weather information is displayed. Weather information
for nearby location, near the destination and your preferred city set as a Favorite
City can be confirmed. Favorite city can be changed by touching [Change City].

[Hourly Weather
Forecast]

[5-Day Forecast]

[Graphical Map]

The weather forecast can be checked on the map. The detailed information is
displayed by touching weather icons. Touch [Legend] to confirm the meaning of
the color displayed, and touch [Filter] to select a type of the weather
information.

[Weather Alerts]

Displays the list of weather alerts. The detailed information is displayed by
touching the weather alert. Touch [Voice Alert Settings] to select the
information you wish to get alerts for and to set voice announcement on or off.

[Alert Map]

The weather alerts can be confirmed on the map. The detailed information is
displayed by touching the weather icon. Touch [Legend] to confirm the weather
alerts displayed.

[SXM Traffic]/[Premium Traffic] (if so equipped)

Displays the Traffic Information screen.

“Viewing traffic information” (page 6-23)

[SXM Sports Scores]

Various sports and individual teams can be followed. Touch [Sports] and select
from the list to display information such as news, scores or upcoming games.

[SXM Stocks]

Stock information can be checked.
Touching [Add Stock] will also allow adding a favorite stock. Once a stock is
added, it’s price and trend can be viewed. Red indicates the stock is down and
green indicates the stock is up. Touch [Delete Stock] to delete the saved stocks.
Up to 20 stocks can be saved. Only supported stocks can be added.

5-24

Menu item

Result

[SXM Fuel Prices]

Displays a list of the nearby gas stations for the current location or destination.
Touch a listed gas station for the detailed information. Touch [Save] to register
in a favorite, and the list is displayed by touching [Favorite]. Touch [Go Here] to
set as a destination. Touch [Delete] to delete the favorite.

[SXM Parking]

Displays a list of the nearby parking areas for the current location or destination.
Touch a listed parking area for the detailed information. Touch [Save] to register
in a favorite, and the list is displayed by touching [Favorite]. Touch [Go Here] to
set as a destination. Touch [Delete] to delete the favorite.

[SXM Movie Listings]

[Favorite Theaters]

Displays a list of favorite theaters. Select the theater for detailed information.
Touch [Go Here] to set as a destination. Touch [Movies] on the list to display a list
of movies that are playing at the theater. When touching a movie on the list,
detailed information of the movie can be checked.

[Nearby Theaters]

Displays a list of nearby theaters. Select the theater for detailed information.
Touch [Go Here] to set as a destination. Touch [Save] to set the theater as a
favorite theater which can be listed in the Favorite Theaters. Touch [Movies] on
the list to display a list of movies that are playing at the theater. When touching a
movie on the list, detailed information of the movie can be checked.

[Current Movies]

Displays a list of movies that are currently playing. Touch a movie from the list to
display detailed information. Touch [Theaters] to display the nearby theaters
that are playing the selected movie. Select the theater from the list and touch
[Go Here] to set as a destination. Touch save as a favorite. Touch [Movies] on the
theater list to check the movies that is playing at the theater.

[Search for a Theater] Search for a theater or movie by inputting the name of the theater or movie.

[Search for a Movie]

5. Information

5-25

5. Information

Apple CarPlay®

WARNING

.

Stop your vehicle in a safe location
and apply the parking brake be-
fore connecting your iPhone® to
the vehicle or operating your con-
nected iPhone® for setup.

.

If you are unable to devote full
attention to vehicle operation
while using Apple CarPlay®, pull
off the road to a safe location and
stop your vehicle.

You can use Apple CarPlay® by connecting
a compatible iPhone® to your vehicle via a
USB cable or wirelessly (if so equipped).

With Apple CarPlay®, your in-vehicle sys-
tem can be used as a display and a
controller for some of the iPhone® func-
tions. Apple CarPlay® features Siri® which
enables operations via voice controls. Visit
Apple.com for information about the
functions that are available and details
about Apple’s privacy policy.

Certain vehicle information (e.g. location
and speed) may be shared with your
device while Apple CarPlay® is in use.
Carrier charges may apply to use Apple

CarPlay®.

COMPATIBILITY

Refer to the Apple website for compatible
devices.

INFO:

.

For best results, always update your
device to the latest software version.

.

Apple CarPlay® will take the place of
your Bluetooth® audio and Bluetooth®
Hands-Free Phone functionality.

.

Phone menu and access to the con-
nected phone through Voice Recogni-
tion System will be disabled while
Apple CarPlay® is connected. To ac-
cess your phone, use the Siri® function
or select the phone icon in the Apple
CarPlay® top menu screen.

.

When setting a route on the navigation
system (if so equipped), if you set a
destination with Apple CarPlay®, the
route setting of the navigation system
will be cancelled.

CONNECTING iPhone®

This system supports wireless Apple Car-
Play® (if so equipped). To connect Apple
CarPlay® wirelessly, the Bluetooth® and
Wi-Fi network (if so equipped) must be
available with the in-vehicle system be-
fore operation.

“Setting devices” (page 2-16)
“Wi-Fi setting” (page 2-18)

INFO:

Depending on the device and firmware
version of the iPhone®, wireless Apple
CarPlay® (if so equipped) cannot be used.
Always update your device to the latest
software version.

Connecting with the USB cable

INFO:

To connect your iPhone® with the in-
vehicle system, it is recommended to use
the Apple Lightning

TM

cable (Mfi certified)

that was provided with your iPhone®.

1.

Connect the iPhone® to the USB con-
nection port.

“USB (Universal Serial Bus) con-
nection ports” (page 2-7)

5-26

2.

Depending on the setting, a Startup
Information screen will appear. Touch
[Yes] to use Apple CarPlay®.

3.

Apple CarPlay® starts and the Apple
CarPlay® screen will appear.

4. If a notification appears on the

iPhone®, select whether or not to use
the wireless connection. Once you
enable wireless Apple CarPlay® (if so
equipped) on the notification, Apple
CarPlay® will automatically start wire-
lessly from next time.

Connecting wirelessly (if so
equipped)

1.

Connect the iPhone® to the in-vehicle
system via Bluetooth®.

“Setting devices” (page 2-16)

INFO:

If no Bluetooth® device is connected
and Apple CarPlay® or Android Auto is
not active, pushing and holding

<

>

on the steering wheel can display the
Connections screen.

2.

Depending on the setting, a Startup
Information screen will appear. Touch
[Yes] to use Apple CarPlay®.

3. A notification will appear on the

iPhone®. Select to use the wireless
connection.

INFO:

If you select not to use the wireless
connection, the iPhone® will be con-
nected as a Bluetooth® device.

4. Wireless Apple CarPlay® will start and

the Apple CarPlay® screen will appear.

INFO:

If the Wi-Fi connection (if so equipped) is
off on the Wi-Fi setting screen, a notifica-
tion will appear. Touch [Yes] to use wire-
less Apple CarPlay®.

“Wi-Fi setting” (page 2-18)

Operating tips

.

If you do not wish to display the
Startup Information screen each time
you activate Apple CarPlay®, turn on
[Don’t Ask Anymore] on the Startup
Information screen. The Startup Infor-
mation screen will not be displayed
from the next Apple CarPlay® activa-
tion. The Startup Information screen
can be set to appear again in the Apple
CarPlay® setting menu.

“Apple CarPlay® settings”
(page 5-29)

.

The system update or the map update
will be stopped while using wireless
Apple CarPlay® (if so equipped).

.

The connection with the other Blue-
tooth® device may be disconnected
when wireless Apple CarPlay® (if so
equipped) is activated.

.

Once the wireless connection (if so
equipped) has been established, Apple
CarPlay® will be automatically con-
nected wirelessly next time.

.

W i r e l e s s A p p l e C a r P l a y ® ( i f s o
equipped) uses the Wi-Fi network (if
so equipped). After connecting the in-
vehicle system to the Wi-Fi network,
the Bluetooth® connection with wire-
less Apple CarPlay® (if so equipped)
connected device will be discon-
nected.

.

If you connect the iPhone® that is
using wireless Apple CarPlay® (if so
equipped) via USB cable, the in-vehicle
system provides power to the iPhone®.

.

If wireless Apple CarPlay® (if so
equipped) does not start automati-
cally, touch [ ] on the device settings
screen.

“Setting devices” (page 2-16)

5. Information

5-27

5. Information

.

If you are using Apple CarPlay® or
Android Auto, you cannot start Apple
CarPlay® with the other iPhone®. To
use Apple CarPlay® with the other
iPhone®, disconnect the current de-
vice, or deactivate Apple CarPlay® or
Android Auto on the Connections set-
tings.

“Connections settings” (page 2-16)

Apple CarPlay® OPERATION

After starting Apple CarPlay®, the iPhone®
functions displayed on the screen can be
operated using the in-vehicle system.

INFO:

.

After exiting the Apple CarPlay®
screen, return to the Apple CarPlay®
screen by taking one of the following
actions.

— Touch [ ] on the Launch Bar.

— Touch [Smartphone Connection] on

the information screen, and then
touch [Apple CarPlay].

.

When your iPhone® is locked, Apple
CarPlay® can still be activated by
operating the iPhone® and allowing
Apple CarPlay® activation.

Siri® operation

With Siri®, some of the functions in your
iPhone® can be voice controlled.

Make sure that Siri® on your iPhone® is
turned on.

Activation:

Push and hold

<

>

on the steering

wheel to start a Siri® session.

INFO:

.

Push

<

>

to end Siri® operation.

.

Keep the interior of the vehicle as quiet
as possible. Close the windows to
eliminate the surrounding noises (traf-
fic noises, vibration sounds, etc.),
which may prevent the system from
recognizing the voice commands cor-
rectly.

.

For functions that can be used with
Siri®, please refer to the Apple website.

Phone operation

If you wish to use the phone with Apple
CarPlay®, follow the procedure below:

1.

Touch [Phone] on the Apple CarPlay®
top menu.

2.

Operate the screen displayed to make
a call, etc.

5-28

Apple CarPlay® SETTINGS

1.

Push

<MENU>

.

2.

Touch [Connections] on the Launch Bar and then touch [Devices].

3.

Touch [ ] by the iPhone® name you wish to change the settings.

4. Touch [Smartphone Projection].

Available setting items:

Setting item 1

Setting item 2

Action

[Start-up Options]

[Always]

Activates Apple CarPlay® automatically when an iPhone® is connected to the in-vehicle
system.

[Ask]

Displays the Startup Information screen when an iPhone® is connected to the in-vehicle
system.

[Never]

Apple CarPlay® will not activate even if an iPhone® is connected to the in-vehicle system.

[Nissan’s Help for Apple CarPlay]

Displays helpful tips for Apple CarPlay® operation.

INFO:

Normal voice recognition access to songs on your iPod® will not be available when connected to Apple CarPlay®. To access to your
iPod®, use the Siri® function or select the music icon in the Apple CarPlay® top menu screen.

“Siri® operation” (page 5-28)

5. Information

5-29

5. Information

Apple CarPlay® SYSTEM LIMITA-
TIONS

For all features of Apple CarPlay® to
operate correctly, it is necessary to have
a compatible iPhone®, a cellular connec-
tion and a data plan.

When Apple CarPlay® is operating, system
performance is affected by the strength of
the cellular connection or performance of
the phone itself. If performance of the
system decreases:

.

Disconnect and reconnect your phone

.

Cycle phone power off/on to restart

Changing government regulations may
also affect operation of Apple CarPlay®.

Android Auto

TM

WARNING

.

Stop your vehicle in a safe location
and apply the parking brake be-
fore connecting your Android

TM

phone to the vehicle or operating
your connected Android phone for
setup.

.

If you are unable to devote full
attention to vehicle operation
while using Android Auto, pull off
the road to a safe location and
stop your vehicle.

You can use Android Auto by connecting a
compatible Android phone to your vehicle
via a USB cable. It is also recommended to
use the Android phone OEM cable that is
compatible with your phone.

With Android Auto, your in-vehicle system
can be used as a display and a controller
for some of the Android phone functions.
Voice control of some of the Android
phone functions is also possible with
Android Auto. Visit www.android.com/
auto for information about the functions
that are available and details about
Google’s privacy policy.

Certain vehicle information (e.g. location
and speed) may be shared with your
device while Android Auto is in use. Carrier
charges may apply to use Android Auto.

COMPATIBILITY

Refer to the Android Auto website for
compatible devices.

INFO:

.

Download the Android Auto App from
Google Play

TM

to Android phone in

advance.

.

For best results, always update your
device to the latest Android software
and Android Auto App version. When
you connect the Android phone to the
in-vehicle system, it will automatically
update the Android software and An-
droid Auto App version.

.

Android Auto will take the place of
your Bluetooth® audio and Bluetooth®
Hands-Free Phone functionality.

.

When setting a route with the naviga-
tion system (if so equipped), if you set a
destination with Android Auto, the
route setting of the navigation system
will be cancelled.

5-30

.

The Phone menu and access to the
connected phone through the Voice
Recognition System will be disabled
while Android Auto is connected. To
access your phone, use the Google
Assistant function or select the phone
icon in the Android Auto top menu
screen.

INITIAL Android Auto SETTINGS

Before using Android Auto, the Android
Auto App must be downloaded on your
Android phone.

Download the Android Auto App from the
Google Play store on your Android phone.

It may be necessary to operate the
Android phone when connected first.

Depending on the selection, such as
approval, some of the features of Android
Auto are not available.

Android Auto OPERATION

Unlock your phone’s screen before con-
necting your Android phone.

1.

Connect your Android phone to the
USB connection port.

“USB (Universal Serial Bus) con-
nection ports” (page 2-7)

2.

Depending on the setting, a Startup
Information screen will appear. Touch
[Yes] to use Android Auto.

INFO:

.

If you do not wish to display the

Startup Information screen each
time you activate Android Auto,
turn on [Don’t Ask Anymore] on
the Startup Information screen.
The Startup Information screen will
not be displayed from the next
Android Auto activation. The Start-
up Information screen can be set to
appear again in the Android Auto
setting menu.

“Android Auto settings”
(page 5-33)

.

If your Android phone is connected

to the in-vehicle system via Blue-
tooth®, your phone’s Bluetooth® will
be turned on automatically when
Android Auto is activated. Keep the
Bluetooth® turned on to use the
phone functions.

.

Some functions of Android Auto are

not available if the Bluetooth® is not
connected.

3.

The Android Auto top menu screen will
appear. The Android phone functions
displayed on the screen should now be
operable using the in-vehicle system.

INFO:

.

While Android Auto is activated on the
Android phone, the phone operations,
such as making or receiving calls, can
only be done with Android Auto.

.

Depending on the device, an Android
phone requires MTP mode to be se-
lected in the USB transfer setting.

.

After exiting the Android Auto screen,
return to the Android Auto screen by
taking one of the following actions.

— Touch [

] on the Launch Bar.

— Touch [Smartphone Connection] on

the information screen, and then
touch [Android Auto].

Google Assistant

TM

operation

Some of the functions on your Android
phone can be voice controlled when
Android Auto is active.

Activation:

Push and hold

<

>

on the steering

wheel to start a Google Assistant session.

5. Information

5-31

5. Information

INFO:

.

Push

<

>

to end voice operation.

.

Keep the interior of the vehicle as quiet
as possible. Close the windows to
eliminate the surrounding noises (traf-
fic noises, vibration sounds, etc.),
which may prevent the system from
recognizing the voice commands cor-
rectly.

.

For functions that can be used with
the voice operation, refer to www.
android.com/auto.

Phone operation

If you wish to use your phone while
Android Auto is activated, follow the
procedure below:

1.

Touch [ ] on the Android Auto screen.

2.

Operate the screen displayed to make
a call, etc.

5-32