Nissan Versa Note. Manual — part 182
COMPONENT PARTS
DLK-13
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
INTELLIGENT KEY SYSTEM
INTELLIGENT KEY SYSTEM : Component Parts Location
INFOID:0000000009693814
ALKIA3191ZZ
DLK-14
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
COMPONENT PARTS
A. View with instrument panel assembly
removed
B. View with glove box door removed
C. View with front grille removed
D. View of LH door (RH similar)
E. View of LH door switch (RH similar)
F.
View with rear bumper cover re-
moved
G. View from rear of vehicle
H. View with rear seat cushion removed I.
View with center console removed
No.
Component
Function
1.
Combination meter
Combination meter transmits the vehicle speed sig-
nal to BCM via CAN communication.
BCM also receives the vehicle speed signal from
ABS actuator and electric unit (control unit) via CAN
communication. BCM compares both signals to de-
tect the vehicle speed.
Security indicator lamp is located on combination
meter.
Security indicator lamp blinks when ignition switch
is in any position other than ON to warn that NIS-
SAN VEHICLE IMMOBILIZER SYSTEM-NATS
[NVIS (NATS)] is on board.
Refer to
MWI-6, "METER SYSTEM : Combination
.
2.
Push-button ignition switch
Push-button ignition switch has push switch inside
which detects that push-button ignition switch is
pressed, and then transmits ON/OFF signal to
BCM. BCM changes the ignition switch position with
the operation of push-button ignition switch. BCM
maintains the ignition switch position status while
push-button ignition switch is not operated.
3.
BCM
BCM controls INTELLIGENT KEY SYSTEM (EN-
GINE START FUNCTION), NISSAN VEHICLE IM-
MOBILIZER SYSTEM-NATS [NVIS (NATS)] and
VEHICLE SECURITY SYSTEM.
BCM performs the ID verification between BCM and
Intelligent Key when the Intelligent Key is carried
into the detection area of inside key antenna, and
push-button ignition switch is pressed. If the ID ver-
ification result is OK, ignition switch operation is
available.
Then, when the ignition switch is turned ON, BCM
performs ID verification between BCM and ECM. If
the ID verification result is OK, ECM can start en-
gine.
Refer to
for detailed installation
location.
4.
Main power window and door lock/unlock switch
Door lock and unlock switch is integrated into the
power window main switch.
Door lock and unlock switch transmits door lock/un-
lock operation signal to BCM.
Refer to
PWC-7, "Power Window Main Switch"
5.
Front door lock assembly LH
Door key cylinder switch is integrated into front door
lock assembly (driver side).
Door key cylinder switch detects door LOCK/UN-
LOCK operation using mechanical key, and then
transmits the operation signal to BCM.
Refer to
DLK-17, "INTELLIGENT KEY SYSTEM :
Front Door Lock Assembly (Driver Side)"
.
6.
Rear door lock actuator LH
Rear door lock actuator locks/unlocks the rear door
latch assembly.
7.
Back door lock actuator
Back door lock actuator locks/unlocks the back door
latch assembly.
COMPONENT PARTS
DLK-15
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY SYSTEM : Inside Key Antenna (Instrument Center)
INFOID:0000000009693815
• Inside key antenna (instrument center) detects that Intelligent Key
is within the inside detection area, and then transmits detection
status to BCM.
• Inside key antenna (instrument center) is installed in the rear of
cluster lid C of instrument center.
8.
Inside key antenna (instrument center)
Inside key antenna (instrument center) detects
whether Intelligent Key is inside the vehicle or not,
and then transmits the signal to the BCM.
Refer to
DLK-15, "INTELLIGENT KEY SYSTEM :
Inside Key Antenna (Instrument Center)"
9.
Remote keyless entry receiver
Remote keyless entry receiver receives button op-
eration signal and key ID signal of Intelligent Key,
and them transmits them to the BCM.
Refer to
DLK-17, "INTELLIGENT KEY SYSTEM :
Remote Keyless Entry Receiver"
.
10.
Intelligent Key warning buzzer
Intelligent Key warning buzzer warns the user, who
is outside the vehicle, of operation confirmation ac-
cording to Intelligent Key operation and door re-
quest switch operation, or of an inappropriate
operation.
Refer to
DLK-17, "INTELLIGENT KEY SYSTEM :
Intelligent Key Warning Buzzer"
.
11.
Outside key antenna LH
Outside key antenna (LH) detects whether Intelli-
gent Key is outside the vehicle or not, and then
transmits the signal to the BCM.
Refer to
DLK-16, "INTELLIGENT KEY SYSTEM :
Outside Key Antenna (Driver Side)"
12.
Door request switch
Door request switch transmits door lock/unlock re-
quest signal to the BCM.
13.
Door switch
Door switch detects door open/close condition and
then transmits ON/OFF signal to BCM.
14.
Outside key antenna (rear bumper)
Outside key antenna (Rear bumper) detects wheth-
er Intelligent Key is outside the vehicle or not, and
then transmits the signal to the BCM.
Refer to
DLK-16, "INTELLIGENT KEY SYSTEM :
Outside Key Antenna (Rear Bumper)"
.
15.
Back door request switch
Back door request switch transmits door lock/unlock
request signal to the BCM.
16.
Inside key antenna (trunk room)
Inside key antenna (trunk room) detects whether In-
telligent Key is inside the vehicle or not, and then
transmits the signal to the BCM.
Refer to
DLK-16, "INTELLIGENT KEY SYSTEM :
Inside Key Antenna (Trunk Room)"
.
17.
Inside key antenna (console)
Inside key antenna (console) detects whether Intel-
ligent Key is inside the vehicle or not, and then
transmits the signal to the BCM.
Refer to
DLK-16, "INTELLIGENT KEY SYSTEM :
No.
Component
Function
JMKIA8646ZZ
DLK-16
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
COMPONENT PARTS
INTELLIGENT KEY SYSTEM : Inside Key Antenna (Console)
INFOID:0000000009693816
• Inside key antenna (console) detects that Intelligent Key is within
the inside detection area, and then transmits detection status to
BCM.
• Inside key antenna (console) is installed underneath the center
console.
INTELLIGENT KEY SYSTEM : Inside Key Antenna (Trunk Room)
INFOID:0000000009693817
• Inside key antenna (trunk room) detects that Intelligent Key is
within the inside detection area, and then transmits detection sta-
tus to BCM.
• Inside key antenna (trunk room) is installed under the rear seat
cushion.
INTELLIGENT KEY SYSTEM : Outside Key Antenna (Rear Bumper)
INFOID:0000000009693818
• Outside key antenna (rear bumper) detects that Intelligent Key is
within the outside detection area, and then transmits detection sta-
tus to BCM. Request signal is transmitted simultaneously to Intelli-
gent Key.
• Outside key antenna (rear bumper) is installed in the rear of rear
bumper.
INTELLIGENT KEY SYSTEM : Outside Key Antenna (Driver Side)
INFOID:0000000009693819
• Outside key antenna (driver side) detects that Intelligent Key is
within the outside detection area, and then transmits detection sta-
tus to BCM. Request signal is transmitted simultaneously to Intelli-
gent Key.
• Outside key antenna (driver side) is installed in driver side outside
handle.
JMKIA8646ZZ
JMKIA8646ZZ
JMKIA8646ZZ
JMKIA8648ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст