Nissan Versa Note. Manual — part 223
INSIDE KEY ANTENNA
DLK-177
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3. Release clips (A) and remove inside key antenna (luggage
room) (1).
INSTALLATION
Installation is in the reverse order of removal.
ALKIA3208ZZ
DLK-178
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
OUTSIDE KEY ANTENNA
OUTSIDE KEY ANTENNA
OUTSIDE HANDLE
OUTSIDE HANDLE : Removal and Installation
INFOID:0000000009486693
REMOVAL
1. Remove outside handle. Refer to
DLK-164, "OUTSIDE HANDLE : Removal and Installation"
.
2. Remove screw (1) and outside handle finisher (1) from outside
handle (2).
3. Remove outside key antenna (outside handle) (1) from outside
handle (2).
INSTALLATION
Installation is in the reverse order of removal.
REAR BUMPER
REAR BUMPER : Removal and Installation
INFOID:0000000009486694
REMOVAL
1. Remove the rear bumper fascia. Refer to
EXT-26, "Removal and Installation"
2. Disconnect the harness connector from the outside key antenna (rear bumper)
3. Release clips (A) and remove outside key antenna (rear
bumper) (1).
INSTALLATION
Installation is in the reverse order of removal.
ALKIA3209ZZ
ALKIA3210ZZ
JMKIA7952ZZ
DOOR REQUEST SWITCH
DLK-179
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR REQUEST SWITCH
DRIVER SIDE
DRIVER SIDE : Removal and Installation
INFOID:0000000009671355
The door request switch (driver side) is serviced as an assembly with the outside handle. Refer to
"OUTSIDE HANDLE : Removal and Installation"
PASSENGER SIDE
PASSENGER SIDE : Removal and Installation
INFOID:0000000009671356
The door request switch (passenger side) is serviced as an assembly with the outside handle. Refer to
164, "OUTSIDE HANDLE : Removal and Installation"
BACK DOOR
BACK DOOR : Removal and Installation
INFOID:0000000009671357
REMOVAL
1. Remove back door outer finisher. Refer to
EXT-46, "Removal and Installation"
2. Remove screws (A) and back door request switch (1) from back
door outer finisher (2).
INSTALLATION
Installation is in the reverse order of removal.
AWKIA2584ZZ
DLK-180
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY WARNING BUZZER
INTELLIGENT KEY WARNING BUZZER
Removal and Installation
INFOID:0000000009486695
REMOVAL
1. Remove front combination lamp (LH). Refer to
EXL-99, "Removal and Installation"
2. Remove bolt (A) and Intelligent Key warning buzzer (1).
INSTALLATION
Installation is in the reverse order of removal.
JMKIA7949ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст