Nissan Versa Note. Manual — part 526
FRONT DOOR FINISHER
INT-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REMOVAL AND INSTALLATION
FRONT DOOR FINISHER
Exploded View
INFOID:0000000008969699
NOTE:
RH side door shown; LH side door similar.
Removal and Installation
INFOID:0000000008969700
REMOVAL - POWER WINDOW
1.
Front door panel
2.
Power window/lock front door finish-
er
3.
Manual window crank wash-
er (if equipped)
4.
Manual window crank han-
dle (if equipped)
5.
Manual window/lock door finisher (if
equipped)
6.
Front door inside seal
7.
Storage tray (if equipped)
8.
Door pull handle escutcheon
9.
Power window and door
lock/unlock switch (RH) fin-
isher
A.
Grommet
Clip
Metal clip
Pawl
AWJIA1145ZZ
INT-16
< REMOVAL AND INSTALLATION >
FRONT DOOR FINISHER
1. Remove door pull handle escutcheon using a suitable tool.
2. Remove screw (B) from power window and door lock/unlock
switch (RH) finisher.
3. Remove power window and door lock/unlock switch (RH) fin-
isher (1) using a suitable tool (A).
: Pawl
4. Disconnect the harness connector from the power window and door lock/unlock switch (RH).
5. Remove front door finisher bolt (A).
6. Release clips using a suitable tool (A) and remove front door fin-
isher as shown.
: Clip
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Visually check the clips and pawls for deformation and damage during installation.
• When installing front door finisher, check that clips and pawls are securely placed into door panel
holes.
REMOVAL - MANUAL WINDOW
1. Remove door pull handle escutcheon using a suitable tool.
2. Release pawls using a suitable tool and remove storage tray (LH/RH).
AWJIA1140ZZ
JMJIA6023ZZ
AWJIA1122ZZ
FRONT DOOR FINISHER
INT-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
3. Release the metal clip (A) behind the manual window crank han-
dle using a suitable tool (B). Pull the manual window crank han-
dle (1) outward from the front door finisher and remove handle.
4. Remove front door finisher.
5. Remove front door finisher bolt (A).
6. Release clips using a suitable tool (A) and remove front door fin-
isher as shown.
: Clip
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Visually check the clips and pawls for deformation and damage during installation.
• When installing front door finisher, check that clips and pawls are securely placed into door panel
holes.
AWJIA1119ZZ
AWJIA1083ZZ
INT-18
< REMOVAL AND INSTALLATION >
REAR DOOR FINISHER
REAR DOOR FINISHER
Exploded View
INFOID:0000000008969701
Removal and Installation
INFOID:0000000008969702
REMOVAL - POWER WINDOW
1. Release rear door corner finisher clip using a suitable tool.
2. Remove rear door pull handle escutcheon using a suitable tool. .
1.
Rear door panel
2.
Rear door finisher
3.
Rear manual window door finisher
(if equipped)
4.
Manual window crank washer
(if equipped)
5.
Manual window crank handle
(if equipped)
6.
Rear door corner finisher
7.
Manual window storage tray (if
equipped)
8.
Rear power window switch fin-
isher (if equipped)
A. Grommet
Pawl
Clip
Metal Clip
AWJIA1144ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст