Nissan Versa Note. Manual — part 64
AV-248
< REMOVAL AND INSTALLATION >
[NAVIGATION]
AROUND VIEW MONITOR CONTROL UNIT
AROUND VIEW MONITOR CONTROL UNIT
Removal and Installation
INFOID:0000000009460077
REMOVAL
1. Remove the front passenger seat. Refer to
SE-22, "PASSENGER SIDE : Removal and Installation"
2. Remove the floor trim. Refer to
INT-27, "Removal and Installation"
3. Disconnect the harness connector from the around view monitor control unit.
4. Remove the screws (A) from the around view monitor control
unit bracket and remove.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Perform camera image calibration. Refer to
AV-181, "CALIBRATING CAMERA IMAGE (AROUND VIEW
.
AWNIA3074ZZ
AV
FRONT CAMERA
AV-249
< REMOVAL AND INSTALLATION >
[NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FRONT CAMERA
Removal and Installation
INFOID:0000000009460078
REMOVAL
1. Remove the front grille. Refer to
EXT-29, "Removal and Installation"
2. Remove the front camera screws (A) and remove.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Perform camera image calibration. Refer to
AV-181, "CALIBRATING CAMERA IMAGE (AROUND VIEW
.
AWNIA3075ZZ
AV-250
< REMOVAL AND INSTALLATION >
[NAVIGATION]
REAR VIEW CAMERA
REAR VIEW CAMERA
Removal and Installation
INFOID:0000000009541293
REMOVAL
1. Remove the back door outer finisher. Refer to
EXT-46, "Removal and Installation"
.
2. Disconnect the harness connector from rear view camera.
3. Remove the nuts (A) from the rear view camera and remove.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Perform camera image calibration. Refer to
AV-181, "CALIBRATING CAMERA IMAGE (AROUND VIEW
.
AWNIA3070ZZ
AV
SIDE CAMERA
AV-251
< REMOVAL AND INSTALLATION >
[NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SIDE CAMERA
Exploded View
INFOID:0000000009681835
Removal and Installation
INFOID:0000000009654080
REMOVAL
1. Remove the door mirror. Refer to
MIR-15, "Removal and Installation"
2. Remove the door mirror glass.
3. Remove the door mirror actuator.
4. Disconnect the harness connector from the side camera.
5. Remove the side camera screws and remove.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Perform camera image calibration. Refer to
AV-181, "CALIBRATING CAMERA IMAGE (AROUND VIEW
.
1.
Door mirror rear finisher
2.
Door mirror
3.
Side camera
A.
Door mirror base finisher
B.
Door mirror glass
Pawl
AWLIA2160ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст