Nissan Versa Note. Manual — part 161
CL-14
< REMOVAL AND INSTALLATION >
CLUTCH PIPING
CLUTCH PIPING
Exploded View
INFOID:0000000009417433
Hydraulic Layout
INFOID:0000000009417434
Removal and Installation
INFOID:0000000009417435
CAUTION:
Do not spill clutch fluid onto painted surfaces. If clutch fluid spills, wipe up immediately and wash the
affected area with water.
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spill-
ing.
1.
CSC (Concentric Slave Cylinder)
2.
Clip
3.
Clutch tube
4.
Clutch damper
5.
Bracket
6.
Master cylinder
AWDIA1109ZZ
1.
Clutch tube
2.
Lock pin
3.
CSC (concentric slave cylinder)
4.
Clutch damper
5.
Master cylinder
6.
Clutch pedal
PCIB1499E
CLUTCH PIPING
CL-15
< REMOVAL AND INSTALLATION >
C
E
F
G
H
I
J
K
L
M
A
B
CL
N
O
P
REMOVAL
1. Remove the battery. Refer to
PG-67, "Removal and Installation (Battery)"
.
2. Use one of the following methods to remove hose from clutch master cylinder.
• Drain clutch fluid from reservoir tank and remove hose. Refer to
• Remove hose from clutch master cylinder.
3. Remove clutch tube lock pin from clutch master cylinder.
4. Remove clutch tube lock pin at clutch housing.
5. Remove clutch tube lock pins (2) from clutch damper (3).
6. Remove clutch tube (1) from clutch damper (3).
7. Remove clutch damper (3) from bracket (4).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not damage clutch tube.
• Insert each clutch tube into the CSC bleeding connector, the clutch damper connector, and the clutch master
cylinder connector until it contacts the end of each connector.
• Install each lock pin into the clutch damper connector and the clutch master cylinder connector until it con-
tacts the end of each connector.
• After installation, bleed the air from the clutch hydraulic system. Refer to
.
Inspection and Adjustment
INFOID:0000000009417436
INSPECTION AFTER REMOVAL
• Check the clutch tube for cracks and damage. If the clutch tube has cracks or damage, replace it with a new
one.
• Check the O-ring of the clutch tube for cracks and damage. If the O-ring of the clutch tube has cracks or
damage, replace clutch tube with a new one.
• Check the clutch damper for cracks and damage. If the clutch damper has cracks or damage, replace it with
a new one.
INSPECTION AFTER INSTALLATION
Check for clutch fluid leaks and check the clutch fluid level. Refer to
WCIA0597E
CL-16
< UNIT REMOVAL AND INSTALLATION >
CSC (CONCENTRIC SLAVE CYLINDER)
UNIT REMOVAL AND INSTALLATION
CSC (CONCENTRIC SLAVE CYLINDER)
Exploded View
INFOID:0000000009417437
Removal and Installation
INFOID:0000000009417438
CAUTION:
• Do not reuse CSC (concentric slave cylinder). CSC slides back to the original position every time
when removing transaxle assembly. At this time, dust on the sliding parts may damage the seal of
CSC and may cause clutch fluid leaks.
• Do not disassemble CSC.
• Do not spill clutch fluid onto painted surfaces. If clutch fluid spills, wipe up immediately and wash
the affected area with water.
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spill-
ing.
REMOVAL
1. Remove engine transaxle assembly. Refer to
EM-86, "Removal and Installation"
.
2. Remove CSC bolts and the CSC from clutch housing.
INSTALLATION
1. Install CSC to clutch housing and then tighten CSC bolts to the specified torque.
CAUTION:
• Do not reuse CSC.
1.
Transaxle assembly
2.
CSC (concentric slave cylinder)
JPDIB0146GB
PCIB1498E
CSC (CONCENTRIC SLAVE CYLINDER)
CL-17
< UNIT REMOVAL AND INSTALLATION >
C
E
F
G
H
I
J
K
L
M
A
B
CL
N
O
P
• Do not insert and operate CSC when transaxle is removed. Piston and stopper of CSC compo-
nents may fall off.
2. Install engine and transaxle assembly. Refer to
EM-86, "Removal and Installation"
.
Inspection and Adjustment
INFOID:0000000009417439
INSPECTION AFTER INSTALLATION
Check for clutch fluid leaks and clutch fluid level. Refer to
.
ADJUSTMENT AFTER INSTALLATION
Perform the air bleeding. Refer to
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст