Nissan Versa Note. Manual — part 132
BRC-92
< DTC/CIRCUIT DIAGNOSIS >
[VDC/TCS/ABS]
VDC OFF SWITCH
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace malfunctioning components.
5.
CHECK VDC OFF SWITCH GROUND CIRCUIT
Check continuity between VDC OFF switch connector M34 terminal 2 and ground.
Is the inspection result normal?
YES
>> Replace ABS actuator and electric unit (control unit). Refer to
BRC-109, "Removal and Installa-
.
NO
>> Repair or replace malfunctioning components.
Component Inspection
INFOID:0000000009637542
1.
CHECK VDC OFF SWITCH
1. Turn ignition switch OFF.
2. Disconnect VDC OFF switch connector.
3. Check continuity between terminals of VDC OFF switch connector.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace VDC OFF switch. Refer to
BRC-111, "Removal and Installation"
ABS actuator and electric unit (control unit)
—
Continuity
Connector
Terminal
E33
20
Ground
No
VDC OFF switch
—
Continuity
Connector
Terminal
M34
2
Ground
Yes
VDC OFF switch terminals
Condition
Continuity
1 – 2
VDC OFF switch pressed
Yes
VDC OFF switch released
No
ABS WARNING LAMP
BRC-93
< DTC/CIRCUIT DIAGNOSIS >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
ABS WARNING LAMP
Component Function Check
INFOID:0000000009637543
1.
CHECK ABS WARNING LAMP FUNCTION
Check that ABS warning lamp in combination meter turns ON for approximately 2 seconds after ignition switch
is turned ON.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Proceed to diagnosis procedure. Refer to
.
Diagnosis Procedure
INFOID:0000000009637544
1.
PERFORM THE SELF-DIAGNOSIS
With CONSULT.
Perform self diagnostic result.
Are any DTCs detected?
YES
>> Refer to
.
NO
>> GO TO 2.
2.
CHECK COMBINATION METER
Check if indication and operation of combination meter are normal. Refer to
Is the inspection result normal?
YES
>> Replace ABS actuator and electric unit (control unit). Refer to
BRC-109, "Removal and Installa-
.
NO
>> Replace combination meter. Refer to
BRC-94
< DTC/CIRCUIT DIAGNOSIS >
[VDC/TCS/ABS]
BRAKE WARNING LAMP
BRAKE WARNING LAMP
Component Function Check
INFOID:0000000009637545
1.
CHECK BRAKE WARNING LAMP FUNCTION (1)
Check that brake warning lamp in combination meter turns ON for approximately 2 seconds after ignition
switch is turned ON.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Proceed to diagnosis procedure. Refer to
.
2.
CHECK BRAKE WARNING LAMP FUNCTION (2)
Check that brake warning lamp in combination meter turns ON/OFF when parking brake is operated.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Check parking brake switch system. Refer to
.
Diagnosis Procedure
INFOID:0000000009637546
1.
PERFORM THE SELF-DIAGNOSIS
With CONSULT.
Perform self diagnostic result.
Are any DTCs detected?
YES
>> Refer to
.
NO
>> GO TO 2.
2.
CHECK COMBINATION METER
Check if indication and operation of combination meter are normal. Refer to
Is the inspection result normal?
YES
>> Replace ABS actuator and electric unit (control unit). Refer to
BRC-109, "Removal and Installa-
.
NO
>> Replace combination meter. Refer to
VDC OFF INDICATOR LAMP
BRC-95
< DTC/CIRCUIT DIAGNOSIS >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
VDC OFF INDICATOR LAMP
Component Function Check
INFOID:0000000009637547
1.
CHECK VDC OFF INDICATOR LAMP FUNCTION
Check that VDC OFF indicator lamp in combination meter turns ON for approximately 2 seconds after ignition
switch is turned ON.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Proceed to diagnosis procedure. Refer to
.
Diagnosis Procedure
INFOID:0000000009637548
1.
PERFORM THE SELF-DIAGNOSIS
With CONSULT.
Perform self diagnostic result.
Are any DTCs detected?
YES
>> Refer to
.
NO
>> GO TO 2.
2.
CHECK COMBINATION METER
Check if indication and operation of combination meter are normal. Refer to
Is the inspection result normal?
YES
>> Replace ABS actuator and electric unit (control unit). Refer to
BRC-109, "Removal and Installa-
.
NO
>> Replace combination meter. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст