Nissan Versa Note. Manual — part 799
TM-76
< SYSTEM DESCRIPTION >
[CVT: RE0F11A]
SYSTEM
·*: If these input/output signals show errors, TCM activates the fail-safe function.
Output
Line pressure solenoid valve
×
×
×
×
Primary pressure solenoid valve
×
×
Torque converter clutch solenoid
valve
×
×
High clutch & reverse brake solenoid
valve
×
×
×
Low brake solenoid valve
×
×
×
Shift position indicator
(CAN communication)
×
OD OFF indicator lamp
(CAN communication)
×
Control Item
Shift control
Line pressure
control
Select control
Lock-up con-
trol
Fail-safe func-
tion *
SYSTEM
TM-77
< SYSTEM DESCRIPTION >
[CVT: RE0F11A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CVT CONTROL SYSTEM : Schematic
INFOID:0000000009019611
JSDIA2911GB
TM-78
< SYSTEM DESCRIPTION >
[CVT: RE0F11A]
SYSTEM
CVT CONTROL SYSTEM : Fail-safe
INFOID:0000000009019612
TCM has a fail-safe mode. The mode functions so that operation can be continued even if the signal circuit of
the main electronically controlled input/output parts is damaged.
If the vehicle shows following behaviors including “poor acceleration”, a malfunction of the applicable system
is detected by TCM and the vehicle may be in a fail-safe mode. At this time, check the DTC code and perform
inspection and repair according to the malfunction diagnosis procedures.
Fail-safe function
JSDIA2912GB
DTC
Vehicle behavior
Conditions of vehicle
P062F
Not changed from normal driving
—
P0705
• Shift position indicator on combination meter is not dis-
played.
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0706
• Shift position indicator on combination meter is not dis-
played.
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
SYSTEM
TM-79
< SYSTEM DESCRIPTION >
[CVT: RE0F11A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
P0711
Acceleration is slow
Engine coolant temperature when engine start: Temp.
≥
10
°C (50°F)
• Selector shock is large
• Start is slow
Engine coolant temperature when engine start:
−35°C (−
31
°F) ≤Temp. < 10°C (50°F)
• Selector shock is large
• Start is slow
Engine coolant temperature when engine start: Temp. <
−
35
°C (−31°F)
P0712
Acceleration is slow
Engine coolant temperature when engine start: Temp.
≥
10
°C (50°F)
• Selector shock is large
• Start is slow
Engine coolant temperature when engine start:
−35°C (−
31
°F) ≤Temp. < 10°C (50°F)
• Selector shock is large
• Start is slow
Engine coolant temperature when engine start: Temp. <
−
35
°C (−31°F)
P0713
Acceleration is slow
Engine coolant temperature when engine start: Temp.
≥
10
°C (50°F)
• Selector shock is large
• Start is slow
Engine coolant temperature when engine start:
−35°C (−
31
°F) ≤Temp. < 10°C (50°F)
• Selector shock is large
• Start is slow
Engine coolant temperature when engine start: Temp. <
−
35
°C (−31°F)
P0715
• Selector shock is large
• Start is slow
• Acceleration is slow
• Vehicle speed is not increased
• Lock-up is not performed
—
P0720
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0740
Lock-up is not performed
—
P0743
Lock-up is not performed
—
P0744
Lock-up is not performed
—
P0746
• Selector shock is large
• Start is slow
• Acceleration is slow
• Vehicle speed is not increased
• Lock-up is not performed
—
P0846
• Start is slow
• Acceleration is slow
—
P0847
Acceleration is slow
—
P0848
• Start is slow
• Acceleration is slow
—
P0863
Not changed from normal driving
—
P0890
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0962
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0963
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
DTC
Vehicle behavior
Conditions of vehicle
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст