Nissan Versa Note. Manual — part 421
EXL-68
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
YES
>> GO TO 5.
NO
>> GO TO 11.
11.
REPAIR CHECK (OPERATION CHECK)
Check the operation of each part.
Does it operate normally?
YES
>> Inspection End.
NO
>> GO TO 3.
POWER SUPPLY AND GROUND CIRCUIT
EXL-69
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
DTC/CIRCUIT DIAGNOSIS
POWER SUPPLY AND GROUND CIRCUIT
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM)
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis
Procedure
INFOID:0000000009694253
Regarding Wiring Diagram information, refer to
.
1.
CHECK FUSES AND FUSIBLE LINK
Check that the following fuses and fusible link are not blown.
Is the fuse blown?
YES
>> Replace the blown fuse or fusible link after repairing the affected circuit.
NO
>> GO TO 2.
2.
CHECK POWER SUPPLY CIRCUIT
1. Disconnect BCM connector M99.
2. Check voltage between BCM connector M99 and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair harness or connector.
3.
CHECK GROUND CIRCUIT
Check continuity between BCM connector M99 and ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Repair harness or connector.
BCM (BODY CONTROL SYSTEM) (WITHOUT INTELLIGENT KEY SYSTEM)
BCM (BODY CONTROL SYSTEM) (WITHOUT INTELLIGENT KEY SYSTEM) : Diag-
nosis Procedure
INFOID:0000000009694252
Regarding Wiring Diagram information, refer to
.
Terminal No.
Signal name
Fuses and fusible link No.
57
Battery power supply
12 (10A)
70
G (40A)
BCM
Ground
Voltage
Connector
Terminal
M99
57
—
Battery voltage
70
BCM
Ground
Continuity
Connector
Terminal
M99
67
—
Yes
EXL-70
< DTC/CIRCUIT DIAGNOSIS >
POWER SUPPLY AND GROUND CIRCUIT
1.
CHECK FUSES AND FUSIBLE LINK
Check that the following fuses and fusible link are not blown.
Is the fuse blown?
YES
>> Replace the blown fuse or fusible link after repairing the affected circuit.
NO
>> GO TO 2.
2.
CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect BCM connectors.
3. Check voltage between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair harness or connector.
3.
CHECK GROUND CIRCUIT
Check continuity between BCM connector and ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Repair harness or connector.
IPDM E/R (WITH INTELLIGENT KEY SYSTEM)
IPDM E/R (WITH INTELLIGENT KEY SYSTEM) : Diagnosis Procedure
INFOID:0000000009694254
Regarding Wiring Diagram information, refer to
.
1.
CHECK FUSE AND FUSIBLE LINKS
Check that the following IPDM E/R fuse or fusible links are not blown.
Terminal No.
Signal name
Fuses and fusible link No.
37
Battery power supply
8 (10A)
42
12 (10A)
50
G (40A)
11
Ignition switch ACC or ON
18 (10A)
38
Ignition switch ON or START
2 (10A)
BCM
Ground
Ignition switch position
Connector
Terminal
—
OFF
ACC
ON
M18
11
0 V
Battery voltage
Battery voltage
37
Battery voltage
38
0 V
0 V
M19
42
Battery voltage
Battery voltage
50
BCM
Ground
Continuity
Connector
Terminal
M19
55
—
Yes
POWER SUPPLY AND GROUND CIRCUIT
EXL-71
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Is the fuse blown?
YES
>> Replace the blown fuse or fusible link after repairing the affected circuit.
NO
>> GO TO 2.
2.
CHECK BATTERY POWER SUPPLY CIRCUIT
1. Disconnect IPDM E/R connector E42.
2. Check voltage between IPDM E/R connector E42 and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness or connectors.
3.
CHECK GROUND CIRCUIT
1. Disconnect IPDM E/R connectors E45 and E46.
2. Check continuity between IPDM E/R connectors and ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Repair or replace harness or connectors.
IPDM E/R (WITHOUT INTELLIGENT KEY SYSTEM)
IPDM E/R (WITHOUT INTELLIGENT KEY SYSTEM) : Diagnosis Procedure
INFOID:0000000009694255
Regarding Wiring Diagram information, refer to
.
1.
CHECK FUSE AND FUSIBLE LINKS
Check that the following IPDM E/R fuse or fusible links are not blown.
Is the fuse blown?
YES
>> Replace the blown fuse or fusible link after repairing the affected circuit.
NO
>> GO TO 2.
Terminal No.
Signal name
Fuse and fusible link Nos.
1
Battery power supply
A (120A), E (80A)
2
B (60A)
IPDM E/R
Ground
Voltage
(Approx.)
Connector
Terminal
E42
1
—
Battery voltage
2
IPDM E/R
Ground
Continuity
Connector
Terminal
E45
19
Yes
E46
60
89
Terminal No.
Signal name
Fuse and fusible link Nos.
1
Battery power supply
A (120A), E (80A)
2
B (60A)
10
Ignition switch ON or START
2 (10A)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст