Nissan Versa Note. Manual — part 847
WCS-2
BCM (BODY CONTROL SYSTEM) (WITH INTEL-
LIGENT KEY SYSTEM) . . . . . . . . . . ....
BCM (BODY CONTROL SYSTEM) (WITH INTEL-
LIGENT KEY SYSTEM) : Diagnosis Procedure . .
BCM (BODY CONTROL SYSTEM) (WITHOUT IN-
TELLIGENT KEY SYSTEM) . . . . . . . . . .
METER BUZZER CIRCUIT . . . . . . . .
Component Function Check . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . .
SEAT BELT BUCKLE SWITCH SIGNAL CIR-
CUIT . . . . . . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . . ..
Component Function Check . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
Component Inspection . . . . . . . . . . ....
PARKING BRAKE SWITCH SIGNAL CIR-
CUIT . . . . . . . . . . . . . . . . ...
Component Function Check . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ..
Component Inspection . . . . . . . . . . ....
KEY SWITCH SIGNAL CIRCUIT (WITHOUT
INTELLIGENT KEY) . . . . . . . . . . ..
Description . . . . . . . . . . . . . . . ..
Component Function Check . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ..
Component Inspection . . . . . . . . . . .
SYMPTOM DIAGNOSIS . . . . . . .
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ...
THE LIGHT REMINDER WARNING DOES
NOT SOUND . . . . . . . . . . . . . ..
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ...
THE KEY WARNING DOES NOT SOUND
(WITHOUT INTELLIGENT KEY) . . . . . ...
Description . . . . . . . . . . . . . . . ..
WCS
PRECAUTIONS
WCS-3
< PRECAUTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000009681837
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SR and SB section of
this Service Manual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery and wait at least three minutes before performing any service.
WCS-4
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000009654139
AWNIA3128ZZ
No.
Component
Function
1.
Parking brake switch
Transmits the parking brake switch signal to the combination meter.
2.
Key switch
Transmits the key switch signal to the BCM.
Refer to
SEC-131, "NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS : Component Parts Loca-
(without Intelligent Key) for detailed installation location.
3.
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to the combination meter via CAN communication.
Refer to
BRC-7, "Component Parts Location"
for detailed installation location.
4.
BCM
Based on the signals received from various units and switches, transmits the buzzer output signal
to the combination meter via CAN communication.
Refer to
BCS-6, "BODY CONTROL SYSTEM : Component Parts Location"
(with Intelligent Key)
or
BCS-73, "BODY CONTROL SYSTEM : Component Parts Location"
(without Intelligent Key)
for detailed installation location.
5.
Combination meter
• Receives a buzzer output signal from the BCM with CAN communication line and sounds the
buzzer.
• Controls the following with the vehicle speed signal received from ABS actuator and electric
unit (control unit) via CAN communication and the signals from switches.
- Seat belt reminder warning chime
- Parking brake release warning chime
- Key warning chime
6.
Seat belt buckle switch LH
Transmits a seat belt buckle switch signal LH to the combination meter.
WCS
COMPONENT PARTS
WCS-5
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Combination Meter
INFOID:0000000009654140
The combination meter has a built-in buzzer (1) and sounds the fol-
lowing warnings, according to signals from each switch and unit.
• Light reminder warning
• Parking brake release warning chime
• Seat belt warning
• Key warning chime
AWNIA3061ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст