Nissan Versa Note. Manual — part 387
EM-64
< REMOVAL AND INSTALLATION >
[HR16DE]
CAMSHAFT
10. Remove the intake valve timing control solenoid valve (1) and
the plug (2) securing the oil filter for intake valve timing control
solenoid valve.
11. Remove the exhaust valve timing control solenoid valve.
12. Remove the plug on the exhaust valve timing control solenoid
valve.
13. Remove the oil filter for exhaust valve timing control solenoid
valve.
14. For component inspection after removal, refer to
INSTALLATION
CAUTION:
Do not reuse O-rings or washers.
1. Install oil filter (1) for intake and exhaust valve timing control
solenoid valves.
CAUTION:
Do not reuse washers.
NOTE:
The intake side is shown as an example.
• The oil filter (1) and washer (2) are assembled to the plug (3),
and then install them in to the cylinder head. Refer to
.
2. Install intake and exhaust valve timing control solenoid valves.
• Insert it straight into the cylinder head.
• Tighten bolts.
CAUTION:
Do not reuse O-rings.
3. Install valve lifters.
• If they are reused, install them in the original positions.
4. Put a matching mark for positioning the camshaft (INT) and the camshaft sprocket (INT):
NOTE:
This helps prevent the knock pin from engaging with the incorrect pin hole after installing the camshaft
(INT) and the camshaft sprocket (INT).
a. Put the matching marks (A) on a line extending from the knock
pin position of camshaft (INT) (1) front surface.
• Put the marks on the visible position with the camshaft
sprocket installed as shown.
b. Put the matching marks on a line extending from the knock pin
hole (B) position of camshaft sprocket (INT) (2) as shown.
• Put the marks on the visible position with it installed to the
camshaft.
5. Put a matching mark for positioning the camshaft (EXH) and the camshaft sprocket (EXH):
NOTE:
This helps prevent the knock pin from engaging with the incorrect pin hole after installing the camshaft
(INT) and the camshaft sprocket (EXH).
PBIC3692E
AWBIA1146GB
PBIC3696E
CAMSHAFT
EM-65
< REMOVAL AND INSTALLATION >
[HR16DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
a. Put the matching marks (A) on a line extending from the knock
pin position of camshaft (EXH) (1) front surface.
• Put the marks on the visible position with the camshaft
sprocket installed as shown.
b. Put the matching marks on a line extending from the knock pin
hole (B) position of camshaft sprocket (EXH) (2) as shown.
• Put the marks on the visible position with it installed to the
camshaft.
6. Install camshaft.
• Note that the camshafts (INT and EXH) have different shapes
at the rear.
• Install camshafts to the cylinder head so that knock pins (A) on
front end are positioned as shown.
NOTE:
Though camshaft does not stop at the portion as shown for the
placement of cam nose, it is generally accepted camshaft is
placed for the same direction as shown.
7. Install camshaft brackets (2 to 5) and (A to D).
JPBIA4155ZZ
(1) : Camshaft (EXH)
(2) : Camshaft (INT)
(A) : Identification mark
Indentification Color
M1 (A)
Camshaft (EXH)
Yellow - Green x 2
Camshaft (INT)
White
JPBIA4156ZZ
(1) : Camshaft (EXH)
(2) : Camshaft (INT)
: Upper side
JPBIA4157ZZ
(A) : EXH side (2 to 5)
(B) : INT side (A to D)
: Engine front
PBIC3703E
EM-66
< REMOVAL AND INSTALLATION >
[HR16DE]
CAMSHAFT
8. Tighten bolts of camshaft brackets in the following steps, in
numerical order as shown.
a. Tighten No. 9 to 11 in numerical order.
b. Tighten No. 1 to 8 in numerical order.
c.
Tighten all bolts in numerical order.
d. Tighten all bolts in numerical order.
9. Install the camshaft sprocket (INT/EXH) to the camshaft (INT/EXH):
a. Refer to the matching mark (A) added in step 4. Securely align
the knock pin and the pin hole, and then install them.
NOTE:
The intake side is shown as an example.
10. Tighten the camshaft sprocket bolt (INT/EXH).
CAUTION:
Hold the camshaft hexagonal part (A), using a suitable tool
to secure the camshaft.
11. Align the matching mark (peripheral groove) (A/C) and the pink
link (B) on the timing chain.
• If the positions of knock pin and pin groove are not aligned,
move the camshaft (EXH) slightly to correct these positions.
(A) : EXH side
(B) : INT side
: Engine front
Camshaft bracket bolts
: 1.96 N·m (0.20 kg-m, 17 in-lb)
Camshaft bracket bolts
: 1.96 N·m (0.20 kg-m, 17 in-lb)
Camshaft bracket bolts
: 5.88 N·m (0.60 kg-m, 52 in-lb)
Camshaft bracket bolts
: 10.4 N·m (1.1 kg-m, 8 ft-lb)
PBIC3686E
PBIC3700E
(1) : Camshaft sprocket (INT)
JPBIA4158ZZ
(1) : Timing chain
(2) : Camshaft sprocket (EXH)
(3) : Camshaft sprocket (INT)
JPBIA4159ZZ
CAMSHAFT
EM-67
< REMOVAL AND INSTALLATION >
[HR16DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
12. Pull out the stopper pin (A), and then apply the tension to the
timing chain by rotating the crankshaft pulley clockwise slightly.
13. Pull out the stopper pin of chain tensioner.
14. Install front cover.
15. Return the camshaft sprocket (INT) in the most retarded position:
a. Remove the stopper pin (A) from the camshaft sprocket (INT).
b. Turn the crankshaft pulley (1) slowly clockwise (A) and return
the camshaft sprocket (INT) to the most retarded angle position.
• When first turning the crankshaft, the camshaft sprocket (INT)
will turn. Once it is turned more, and the vane (camshaft) also
turns, then it has reached the most retarded angle position.
• The most retarded angle position can be checked by seeing if
the stopper pin groove (A) is shifted clockwise.
• After spinning the crankshaft slightly in the counterclockwise
direction, you can check the lock pin has joined by seeing if
the vane (camshaft) and the sprocket move together.
16. Install the camshaft position sensor (PHASE) to the rear end of cylinder head.
• Tighten bolts with it completely inserted.
17. Check and adjust valve clearance. Refer to
EM-10, "Inspection and Adjustment"
18. Installation of the remaining components is in the reverse order of removal.
INSPECTION AFTER INSTALLATION
(1) : Plunger
(2) : Chain tensioner
(B) : Lever
(C) : Lever hole
(D) : Front cover has been removed for clarity.
PBIC3772E
(B) : Tape
PBIC3685E
PBIC3704E
(B) : Stopper pin hole
(C) : Most advanced angle
(D) : Lock pin engaged
PBIC3705E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст