Nissan Versa Note. Manual — part 137
BRC-112
< REMOVAL AND INSTALLATION >
[VDC/TCS/ABS]
STEERING ANGLE SENSOR
STEERING ANGLE SENSOR
Exploded View
INFOID:0000000009654075
Removal and Installation
INFOID:0000000009364977
REMOVAL
1. Remove the spiral cable. Refer to
SR-15, "Removal and Installation"
.
2. Remove the screws (A), then release the pawls (B) and remove
the steering angle sensor (2) from the spiral cable (1).
INSTALLATION
Installation is in the reverse order of removal.
Adjust the neutral position of the steering angle sensor. Refer to
CAUTION:
Do not reuse steering angle sensor.
1.
Steering angle sensor
A.
Screw
Do not reuse
Front
ALFIA0235ZZ
ALHIA0271ZZ
BRM-1
BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY
C
D
E
F
G
H
I
J
L
M
SECTION
BRM
A
B
BRM
N
O
P
CONTENTS
BODY REPAIR
VEHICLE INFORMATION . . . . . . . .
BODY EXTERIOR PAINT COLOR . . . . . .
Body Exterior Paint Color . . . . . . . . . ...
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
Precaution for Heating Metal . . . . . . . . .....
HANDLING PRECAUTIONS FOR PLASTICS . .
Precautions For Plastics . . . . . . . . . . ..
PRECAUTIONS IN REPAIRING HIGH
STRENGTH STEEL . . . . . . . . . . . .
High Strength Steel (HSS) . . . . . . . . . ..
Handling of Ultra High Strength Steel Plate Parts . ..
PREPARATION . . . . . . . . . . ...
REPAIRING MATERIAL . . . . . . . . .
Foam Repair . . . . . . . . . . . . . . ...
BODY COMPONENT PARTS . . . . . . .
Underbody Component Parts . . . . . . . .
Body Component Parts . . . . . . . . . . ...
REMOVAL AND INSTALLATION . . . ...
CORROSION PROTECTION . . . . . . . .
Description . . . . . . . . . . . . . . . ...
Anti-Corrosive Wax . . . . . . . . . . . . .
Undercoating . . . . . . . . . . . . . . ...
BODY SEALING . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . . ...
REPLACEMENT OPERATIONS . . . . . ...
Description . . . . . . . . . . . . . . . ...
Hoodledge . . . . . . . . . . . . . . . ...
Front Side Member . . . . . . . . . . . . ..
Front Pillar . . . . . . . . . . . . . . . ..
Dash Side . . . . . . . . . . . . . . . .
Center Pillar . . . . . . . . . . . . . . . .
Roof . . . . . . . . . . . . . . . . . . .
Outer Sill . . . . . . . . . . . . . . . . .
Rear Fender . . . . . . . . . . . . . . .
Rear Panel . . . . . . . . . . . . . . . ..
Rear Floor Rear . . . . . . . . . . . . . .
Rear Side Member Extension . . . . . . . ...
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . .
BODY ALIGNMENT . . . . . . . . . . ..
Body Center Marks . . . . . . . . . . . .
Description . . . . . . . . . . . . . . . ...
Engine Compartment . . . . . . . . . . . ..
Underbody . . . . . . . . . . . . . . . ...
Passenger Compartment . . . . . . . . . .
BRM-2
< VEHICLE INFORMATION >
BODY EXTERIOR PAINT COLOR
VEHICLE INFORMATION
BODY EXTERIOR PAINT COLOR
Body Exterior Paint Color
INFOID:0000000009345071
M = Metallic, 2S = Solid and Clear, 3P = 3-Stage pearl, t = Primerless Diamond Clear coat.
AWKIA2519ZZ
Component
Color code
B17
FAK
QAC
KH3
K23
K36
NAC
RBE
Description
Blue
Green
White
Black
Silver
Gray
Red
Blue
Paint type
M
M
3P
2S
M
M
M
M
Hard clear coat
t
t
t
t
t
t
t
t
1
Door outside handles
Body color
B17
FAK
QAC
KH3
K23
K36
NAC
RBE
2
Fuel filler lid
Body color
B17
FAK
QAC
KH3
K23
K36
NAC
RBE
3
Back door outer finisher Body color
B17
FAK
QAC
KH3
K23
K36
NAC
RBE
4
Rear bumper fascia
Body color
B17
FAK
QAC
KH3
K23
K36
NAC
RBE
5
Door mirror
Body color
B17
FAK
QAC
KH3
K23
K36
NAC
RBE
Black
KH3
KH3
KH3
KH3
KH3
KH3
KH3
KH3
6
Front bumper fascia
Body color
B17
FAK
QAC
KH3
K23
K36
NAC
RBE
7
Front grille
Black
KH3
KH3
KH3
KH3
KH3
KH3
KH3
KH3
PRECAUTIONS
BRM-3
< PRECAUTION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000009509277
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SR and SB section of
this Service Manual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery and wait at least three minutes before performing any service.
Precaution for Heating Metal
INFOID:0000000009764358
• Normal Steel (coated and non-coated)
390 MPa - 590MPa
• High Tensile (coated and non-coated) above
590 MPa
• Maximum temperature for heating both steel types is: 550 degrees Celsius
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст