Nissan Versa Note. Manual — part 5
AV-12
< SYSTEM DESCRIPTION >
[BASE AUDIO]
SYSTEM
SYSTEM
System Description
INFOID:0000000009681842
SYSTEM DIAGRAM
AUDIO SYSTEM
The audio system consists of the following components
• Audio unit
• Front door speakers
• Rear door speakers
• Steering switches
• Antenna amp.
• Rod antenna
When the audio system is on, AM/FM signals received by the rod antenna are amplified by the antenna amp.
and sent to the audio unit. The audio unit then sends audio signals to the front door speakers and rear door
speakers.
Refer to Owner's Manual for audio system operating instructions.
HANDS-FREE PHONE SYSTEM
System Operation
NOTE:
Cellular telephones must have their wireless connection set up (paired) before using the Bluetooth
®
telephone
system.
The Bluetooth
®
telephone system allows users who have a Bluetooth
®
cellular telephone to make a wireless
connection between their cellular telephone and the Bluetooth
®
control unit. Hands-free cellular telephone
calls can be sent and received. Some Bluetooth
®
cellular telephones may not be recognized by the Bluetooth
®
control unit. When a cellular telephone or the Bluetooth
®
control unit is replaced, the telephone must be paired
with the Bluetooth
®
control unit. Different cellular telephones may have different pairing procedures, refer to
the cellular telephone operating manual.
Refer to the Owner's Manual for Bluetooth
®
telephone system operating instructions.
Bluetooth
®
Control Unit
When the ignition switch is turned to ACC or ON, the Bluetooth
®
control unit will power up. During power up,
the Bluetooth
®
control unit is initialized and performs various self-checks. Initialization may take up to 20 sec-
onds. If a phone is present in the vehicle and paired with the Bluetooth
®
control unit, Nissan Voice Recognition
will then become active. Bluetooth
®
telephone functions can be turned off using the Nissan Voice Recognition
system.
Steering Switches
AWNIA3132GB
AV
SYSTEM
AV-13
< SYSTEM DESCRIPTION >
[BASE AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
When buttons on the steering switches are pushed, the resistance in steering wheel audio control switch cir-
cuit changes, depending on which button is pushed. The Bluetooth
®
control unit uses this signal to perform
various functions while navigating through the voice recognition system.
The following functions can be performed using the steering switches:
• Initiate self-diagnosis of the Bluetooth
®
telephone system
• Start a voice recognition session
• Answer and end telephone calls
• Adjust the volume of calls
Microphone
The microphone is located in the roof console assembly. The microphone sends a signal to the Bluetooth
®
control unit. The microphone can be actively tested during self-diagnosis.
Audio Unit
The audio unit receives signals from the Bluetooth
®
control unit and sends audio signals to the speakers.
SPEED SENSITIVE VOLUME SYSTEM
Volume level of this system goes up and down automatically in proportion to the vehicle speed. The control
level can be selected by the customer. Refer to Owner's Manual for operating instructions.
AV-14
< SYSTEM DESCRIPTION >
[BASE AUDIO]
DIAGNOSIS SYSTEM (AUDIO UNIT)
DIAGNOSIS SYSTEM (AUDIO UNIT)
Diagnosis Description
INFOID:0000000009459911
The audio unit on board diagnosis performs the functions listed in the table below:
On Board Diagnosis Function
INFOID:0000000009459912
METHOD OF STARTING
Hardware/Software Versions and Speaker Channel Check
1. Turn the ignition ON.
2. Turn the audio system OFF.
3. While pressing the preset 1 button, turn the volume control dial
clockwise or counterclockwise 30 clicks or more.
4. Initially, all display segments will be illuminated.
5. To exit hardware/software versions and speaker channel check, turn the ignition OFF.
Communication Diagnosis
1. Turn the ignition ON.
2. Turn the audio system OFF.
Mode
Description
Hardware/Software Versions
The following information is available for the audio unit:
• hardware version.
• software version.
• EQ pin info.
Speaker Channel Check
The connection of the speakers to the audio unit can be confirmed.
Communication Diagnosis
The AV communication (M-CAN) message history can be monitored.
AWNIA3042ZZ
ALNIA1382GB
AV
DIAGNOSIS SYSTEM (AUDIO UNIT)
AV-15
< SYSTEM DESCRIPTION >
[BASE AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
3. While pressing the preset 6 button, turn the volume control dial
clockwise or counterclockwise 30 clicks or more.
4. Initially, the communication diagnosis mode is displayed.
5. To exit communication diagnosis, turn the ignition OFF.
SELF DIAGNOSIS MODE
Hardware/Software Versions
1. Press the DISP button to enter versions display, and the audio
head unit software version is displayed.
2. With each additional press of the DISP button, the following information is available:
-
HARD V###### (hardware version)
-
EEP V###### (EEPROM version)
-
@@@@ EQ1-4 # (EQ pin info)
If an EQ error is present, INVALID EQ is displayed
3. Hold the DISP button down to return to all display segments screen.
Speaker Channel Check
ALNIA1516ZZ
ALNIA1387GB
ALNIA1383GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст