Nissan Versa Note. Manual — part 185
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-25
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REMOTE KEYLESS ENTRY FUNCTION
REMOTE KEYLESS ENTRY FUNCTION : System Description
INFOID:0000000009693830
SYSTEM DIAGRAM
REMOTE KEYLESS ENTRY OPERATION
The Intelligent Key has the same functions as the remote control entry system. Therefore, it can be used in the
same manner as the remote controller by operating the door lock/unlock button.
Remote keyless entry system controls operation of the following items.
• Auto door lock
• Door lock/unlock
• Hazard and buzzer reminder
OPERATION AREA
To check that the Intelligent Key works normally, use within 1 m (3 ft) range of each door, however the opera-
ble range may differ according to surroundings.
DOOR LOCK/UNLOCK FUNCTION
• When door lock/unlock button of the Intelligent Key is pressed, lock signal or unlock signal is transmitted
from Intelligent Key to BCM via remote keyless entry receiver.
• BCM receives the signal and compares it with the registered key ID to the vehicle.
• BCM transmits door lock/unlock signal to each door lock actuator and operates each door lock actuator,
when key ID matches. At the same time, BCM blinks hazard warning lamps (lock: 1 time, unlock: 2 times)
and sounds Intelligent Key buzzer (lock: 1 time, unlock: 2 times) as a reminder.
OPERATION CONDITION
Door lock function
In
te
llige
nt
Key
Re
mo
te
ke
yl
es
s en
try rec
ei
ve
r
Do
or swit
ch
Do
or requ
es
t swit
ch
Do
or loc
k ac
tu
ato
r
In
si
de
ke
y an
ten
n
a
Out
si
de ke
y a
n
ten
n
a
In
te
llige
nt
Key
wa
rnin
g
bu
zz
er
CAN co
mm
un
ic
ati
on
s
ys
tem
BC
M
Hazard w
a
rning
lamp
P
us
h-b
utt
on ig
nit
ion
s
w
itc
h
Combination meter
Door lock/unlock function
×
×
×
×
×
×
×
×
Hazard and buzzer reminder function
×
×
×
×
×
Auto door lock function
×
×
×
×
×
×
×
×
ALKIA3195GB
DLK-26
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
SYSTEM (INTELLIGENT KEY SYSTEM)
HAZARD AND BUZZER REMINDER FUNCTION
For the operation check, BCM blinks hazard warning lamps (lock: 1 time, unlock: 2 times) and sounds Intelli-
gent Key warning buzzer (lock: 1 time, unlock: 2 times) when door lock or unlock operates by each remote
controller button operation of Intelligent Key.
How to Change Hazard and Buzzer Reminder Mode
DLK-31, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
AUTO DOOR LOCK FUNCTION
After door is unlocked by Intelligent Key button operation and if 30 seconds or more passes without performing
the following operation, all doors are automatically locked. However, operation check function does not acti-
vate.
Auto door lock mode can be changed by the “AUTO LOCK SET” mode in “WORK SUPPORT”. Refer to
31, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
LIST OF OPERATION RELATED PARTS
Parts marked with
× are the parts related to operation.
KEY REMINDER FUNCTION
Remote controller operation
Operation condition
Lock
• All door are closed
• Ignition switch is in the LOCK or OFF position
• P position warning is not activated
Unlock
• Ignition switch is in the LOCK or OFF position
• Intelligent Key is outside the vehicle
• P position warning is not activated
Operating condition
• Door switch is ON (door is open)
• BCM receives lock signal
• Push switch is pressed
Remote keyless entry functions
In
te
lli
ge
nt Key
Re
mo
te
ke
yl
es
s e
nt
ry re
ce
iv
er
Doo
r swi
tch
Do
or l
oc
k
ac
tua
tor
Pu
sh
-bu
tto
n ign
iti
on
swi
tch
In
te
lli
ge
nt
Key
warn
in
g b
uz
ze
r
CAN c
om
m
un
ica
tion
sy
st
em
BCM
Co
mb
ina
tion me
ter
Hazard warning lamp
IP
DM
E/
R
Horn
Door lock/unlock function by remote control button
×
×
×
×
×
×
Hazard and buzzer reminder function
×
×
×
×
×
×
×
Auto door lock function
×
×
×
×
×
×
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-27
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
KEY REMINDER FUNCTION : System Description
INFOID:0000000009693831
System Diagram
BASIC OPERATION
Key reminder is the function that prevents the key from being left in the vehicle.
Key reminder has the following 3 functions.
*:When closing the door if something comes into contact with the door lock switch it might activate the door locks accidentally, but the
unlock operation will override this.
NOTE:
The above function operates when the Intelligent Key is inside the vehicle. However, there may be times when
the Intelligent Key cannot be detected, and this function does not operate when the Intelligent Key is on the
instrument panel, rear parcel shelf, or in the glove box. Also, this system sometimes does not operate if the
Intelligent Key is in the door pocket for the open door.
WARNING FUNCTION
WARNING FUNCTION : System Description
INFOID:0000000009693832
OPERATION DESCRIPTION
The warning function are as per the following items and are given to the user as warning information and
warnings using combinations of Intelligent Key warning buzzer, combination meter buzzer, KEY warning lamp,
shift P warning lamp and engine start operation indicator lamp.
• Intelligent Key system malfunction
• OFF position warning
• P position warning
• ACC warning
• Take away warning
• Door lock operation warning
• Engine start information
ALKIA3196GB
Key reminder function
Operation condition
Operation
Driver side door closed*
Right after driver side door is closed under the following conditions
• Intelligent Key is inside the vehicle
• Driver side door is opened
• Driver side door is in unlock state
All doors unlock
Door is open or closed
Right after all doors are closed under the following conditions
• Door lock/unlock switch or driver side door lock knob are operated
• Intelligent Key is inside the vehicle
• Any door is opened
• All doors are locked.
• All doors unlock
• Honk Intelligent Key warn-
ing buzzer
Back door is closed
Right after Back door is closed under the following conditions
• Intelligent Key is inside trunk room
• All doors are closed
• All doors are locked
• Back door open
• Honk Intelligent Key warn-
ing buzzer
DLK-28
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
SYSTEM (INTELLIGENT KEY SYSTEM)
• Intelligent Key low battery warning
• Key ID warning
OPERATION CONDITION
Operation condition of warning and information is as per the following table.
WARNING METHOD
The following table shows the alarm or warning methods with chime.
Warning/Information functions
Operation procedure
Intelligent Key system malfunction
A malfunction is detected on BCM and key warning lamp turns ON
OFF position warning
When condition A, B or condition C is satisfied
• Condition A
- Ignition switch: ACC position
- Door switch (driver side): ON (Door is open)
• Condition B
- Turn ignition switch from ON to OFF while door is open
• Condition C
- Intelligent Key backside is contacted to push-button ignition switch while
brake pedal is depressed and ignition switch is LOCK or OFF (When the
Intelligent Key battery is discharged)
- Door switch (driver side): ON (Door is open)
P position warning
For internal
• Shift position: Other than P
• Engine is stopped (Ignition switch is turned from ON to OFF)
For external
• P position warning (For internal) operates
• Door switch: ON to OFF (Door is open to close)
• Intelligent Key cannot be detected inside the vehicle
ACC warning
• After P position warning operates, or when ignition switch is turned ON
immediately after P position warning operates
• Ignition switch: ACC
Take away warning
Door status changes
from open to close
• Ignition switch: Other than LOCK and OFF
• Door switch: ON to OFF (Door status changes from open to close)
• Registered Intelligent Key is not detected inside the vehicle
Door status is open
• Ignition switch: Other than LOCK and OFF
• Door switch: ON (Door is open)
• Registered Intelligent Key is not detected inside the vehicle during Key
ID verification for 5 seconds
Push button-ignition
switch operation
• Ignition switch: Other than LOCK position
• Push-button ignition switch is pressed
• Registered Intelligent Key is not detected inside the vehicle
Door lock operation warning
Door lock operation is requested while door lock operation condition of
door request switch is not satisfied
Engine start information
Ignition switch is ON po-
sition
• Ignition switch: ON position
• Shift position: P
• Engine is stopped
Ignition switch is other
than ON position
• Ignition switch: Other than ON
• Shift position: P
• Intelligent Key is in the passenger room after driver door is opened and
closed
Ignition switch is ON po-
sition to OFF position
• Ignition switch: ON position to OFF position
• Shift position: P position
NOTE:
Engine start information turns ON for several seconds and then turns OFF,
when ignition switch is turned to the ON position from the OFF position. En-
gine start information does not turn ON until opening and closing of driver
door is detected again.
Intelligent Key low battery warning
BCM detects that Intelligent Key is low battery, after ignition switch is turned
ON
Key ID warning
• Push-button ignition switch is pressed
• Registered Intelligent Key is not detected inside the vehicle
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст