Nissan Versa Note. Manual — part 147
B
R
M
- 4
0
< SERVICE DATA AND SPECIFICATIONS (SDS)
BODY ALIGNMENT
SERVICE DATA AND SPECIFICATIONS (SDS)
BODY ALIGNMENT
Body Center Marks
INFOID:0000000009345094
A mark has been placed on each part of the body to indicate the vehicle center. When repairing parts dam-
aged by an accident which might affect the vehicle frame (members, pillars, etc.), more accurate and effective
repair will be possible by using these marks together with body alignment specifications.
Front
Point
Portion
Mark
A
Cowl top extension
Hole
B
Front roof position mark for alignment
Raised dimple
C
Rear roof position mark for alignment
Raised dimple
D
Rear panel upper
Cut out
AWKIA2546ZZ
BODY ALIGNMENT
BRM-41
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Description
INFOID:0000000009345095
• All dimensions indicated in the figures are actual.
• When using a tracking gauge, adjust both pointers to equal length. Then check the pointers and gauge itself
to make sure there is no free play.
• When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
• Measurements should be taken at the center of the mounting holes.
• An asterisk (*) following the value at the measuring point indicates that the measuring point on the other side
is symmetrically the same value.
• The coordinates of the measurement points are the distances measured from the standard line of
″X″, ″Y″
and
″Z″.
Engine Compartment
INFOID:0000000009345096
MEASUREMENTS
PIIA0104E
BRM-42
< SERVICE DATA AND SPECIFICATIONS (SDS)
BODY ALIGNMENT
Unit: mm (in)
ALKIA3123ZZ
Position
Description
Measurement
A.
Center of rear hood hinge hole to center of rear hood hinge hole 12 (0.47)
1407.0 (55.39)
B.
Center shock hole to the center of the shock hole 52 (2.05)
1132.0 (44.57)
C.
Center of front shock tower hole to the center of the front shock tower hole 12 (0.47)
1228.0 (48.35)
D.
Hole for hood locator to the hole for hood locator 12 (0.47)
1346.0 (53.99)
E.
Rear hole for radiator support to rear hole for radiator support 7 (0.28)
893.0 (35.16)
BODY ALIGNMENT
BRM-43
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Underbody
INFOID:0000000009345097
MEASUREMENT
F.
Upper hole for front bumper reinforcement to upper hole front bumper reinforcement 8.2 (0.32)
948.0 (37.32)
G.
Lower hole front radiator support to lower hole front lower radiator support 11 (0.43)
987.0 (38.86)
H.
Rear hinge hole 12 (0.47) to front hole upper radiator support 12 (0.47)
1312.0 (51.65)
J.
Rear hinge hole 12 (0.47) to hood locator hole 7 (0.28)
345.0 (13.58)
ALKIA3128ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст