Nissan Frontier D22. Manual — part 40
PARKING PAWL COMPONENTS
AT-129
[RL4R01A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
PARKING PAWL COMPONENTS
PFP:31991
Components
ECS007KO
Disassembly
ECS007KP
1.
Slide return spring to the front of rear extension flange.
2.
Remove return spring, pawl spacer and parking pawl from rear
extension.
3.
Remove parking pawl shaft from rear extension.
LCIA0287E
SAT226H
SAT227H
AT-130
[RL4R01A]
PARKING PAWL COMPONENTS
4.
Remove parking actuator support from rear extension.
Inspection
ECS007KQ
PARKING PAWL AND PARKING ACTUATOR SUPPORT
●
Check contact surface of parking rod and parking gear for wear.
Assembly
ECS007KR
1.
Install parking actuator support onto rear extension.
2.
Insert parking pawl shaft into rear extension.
3.
Install return spring, pawl spacer and parking pawl onto parking
pawl shaft.
SAT228H
AAT888
SAT229H
SAT227H
PARKING PAWL COMPONENTS
AT-131
[RL4R01A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
4.
Bend return spring upward and install it onto rear extension.
SAT226H
AT-132
[RL4R01A]
ASSEMBLY
ASSEMBLY
PFP:00000
Assembly (1)
ECS007KS
1.
Install manual shaft components.
a.
Install oil seal onto manual shaft.
●
Apply ATF to oil seal.
●
Wrap threads of manual shaft with masking tape.
b.
Insert manual shaft and oil seal as a unit into transmission case.
c.
Remove masking tape.
d.
Push oil seal evenly and install it onto transmission case.
e.
Align groove in shaft with drive pin hole; then drive pin into posi-
tion as shown in figure at left.
f.
Install detent spring and spacer.
SAT931A
SAT932A
SAT933A
SAT934A
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст