Nissan Frontier D22. Manual — part 836
MTC-66
REFRIGERANT LINES
Components
EJS0020I
WJIA0681E
REFRIGERANT LINES
MTC-67
C
D
E
F
G
H
I
K
L
M
A
B
MTC
Removal and Installation for Compressor
EJS0020J
KA24DE
VG33E AND VG33ER
LHA236
LHA237
MTC-68
REFRIGERANT LINES
Removal and Installation for Compressor Clutch
EJS0020K
KA24DE
VG33E AND VG33ER
LJIA0008E
AHA507A
REFRIGERANT LINES
MTC-69
C
D
E
F
G
H
I
K
L
M
A
B
MTC
REMOVAL
1.
Remove the drive plate center bolt, hold clutch disc using Tool.
2.
Remove the drive plate using Tool.
●
Insert Tool's three pins into the drive plate. Rotate the Tool
clockwise to hook it onto the plate. Then, tighten the center
bolt to remove the drive plate.
●
While tightening the center bolt, insert a round bar (such as a
suitable screwdriver) between two of the pins (as shown) to
prevent drive plate rotation. After removing the drive plate,
remove the shims from either the drive shaft or the drive plate.
3.
Remove the snap ring using suitable external snap ring pliers as
shown.
4.
Remove the pulley assembly using a suitable pulley puller.
●
Position the center of the pulley puller on the end of the drive
shaft. Remove the pulley assembly with the puller.
CAUTION:
For pressed pulleys:
To prevent the deformation of the pulley groove, the puller
claws should be hooked under (not into) the pulley groove.
5.
Remove the field coil harness clip using a suitable screwdriver.
AHA841
AHA506A
AHA843
RHA139E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст