Nissan Frontier D22. Manual — part 151
REMOTE KEYLESS ENTRY SYSTEM
BL-41
C
D
E
F
G
H
J
K
L
M
A
B
BL
ID Code Entry Procedure
EIS002CF
NOTE:
●
If a keyfob is lost, the ID code of the lost keyfob must be erased to prevent unauthorized use.
WEL817A
BL-42
REMOTE KEYLESS ENTRY SYSTEM
To erase all ID codes in memory, register one ID code (keyfob) four times. After all ID codes are erased,
the ID codes of all remaining and/or new keyfobs must be re-registered.
●
When registering an additional keyfob, the existing ID codes in memory may or may not be erased. If four
ID codes are stored in memory when an additional code is registered, only the oldest code is erased. If
less than four ID codes are stored in memory when an additional ID code is registered, the new ID code is
added and no ID codes are erased.
●
If you need to activate more than two additional new keyfobs, repeat the procedure “ADDITIONAL ID
CODE ENTRY” for each new keyfob.
●
Entry of a maximum of four ID codes is allowed. When more than four ID codes are entered, the oldest ID
code will be erased.
●
If an ID code has already been registered in the memory, the same ID code can be entered in the memory
again. Each registration of an ID code counts as an additional code.
Keyfob Battery Replacement
EIS002CG
NOTE:
●
Be careful not to touch the circuit board or battery terminal.
●
The keyfob is water-resistant. However, if it does get wet, wipe it dry immediately.
●
After battery replacement, press the keyfob buttons two or three times to check their operation.
WEL911A
VEHICLE SECURITY (THEFT WARNING) SYSTEM
BL-43
C
D
E
F
G
H
J
K
L
M
A
B
BL
VEHICLE SECURITY (THEFT WARNING) SYSTEM
PFP:00100
Component Parts and Harness Connector Location
EIS002CH
WIIA0114E
BL-44
VEHICLE SECURITY (THEFT WARNING) SYSTEM
WIIA0113E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст