Nissan Frontier D22. Manual — part 24
REMOVAL AND INSTALLATION
AT-65
[RL4R01A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
4.
Install the rear plate.
5.
Tighten bolts securing transmission.
6.
Installation of the remaining components is in the reverse order
of removal.
7.
Adjust control cable. Refer to
AT-61, "Control Cable Adjustment"
.
8.
Adjust throttle wire. Refer to
AT-60, "Throttle Wire Adjustment"
9.
Adjust PNP switch. Refer to
AT-60, "Park/Neutral Position (PNP)
10. Refill transmission with ATF and check fluid level.
11. Move selector lever through all positions to be sure that trans-
mission operates correctly.
With parking brake applied, allow engine to idle. Move selector
lever through N to D, to 2, to 1 and to R. A slight shock should
be felt through hand gripping the selector each time the trans-
mission is shifted.
12. Perform road test. Refer to
Rear plate bolts
10 mm
3-4 Nm (0.3-0.4 kg-m, 32-
35 in-lb)
14 mm
16-22 Nm (1.6 2.2kg-m, 12-
16 ft-lb)
LBIA0363E
Bolt No.
Tightening torque
N·m (kg-m, ft-lb)
Bolt length “
”
mm (in)
1
39 - 49 (4.0 - 5.0, 29 - 36)
43 (1.69)
2
3 - 4 (0.3 - 0.4, 2.2 - 2.9)
16 (0.63)
3
16 - 22 (1.6 - 2.2, 12 - 16)
16 (0.63)
AAT153A
SAT638A
AT-66
[RL4R01A]
OVERHAUL
OVERHAUL
PFP:00000
Components
ECS007JD
WAT516
OVERHAUL
AT-67
[RL4R01A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
WCIA0159E
AT-68
[RL4R01A]
OVERHAUL
Oil Channel
ECS007JE
WCIA0160E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст