Nissan Rogue. Manual — part 808
PERSONAL LAMP
INL-59
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
PERSONAL LAMP
Removal and Installation
INFOID:0000000011279231
The personal lamp is serviced as part of headlining. Refer to
INT-30, "Removal and Installation"
Bulb or Lens Replacement
INFOID:0000000011279232
WARNING:
Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.
CAUTION:
• Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from
bulb surface.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may
affect the performance of lamp.
• Do not attempt to separate the personal lamp from the headlining or damage may occur.
1. Insert a suitable tool into the gap between the lens and personal lamp, then gently release the lens pawls
and remove.
2. Grasp the bulb and pull straight out from its socket to remove.
3. Install personal lamp bulb to personal lamp.
4. Install the personal lamp lens.
INL-60
< REMOVAL AND INSTALLATION >
LUGGAGE ROOM LAMP
LUGGAGE ROOM LAMP
Removal and Installation
INFOID:0000000011279233
REMOVAL
1. Insert a suitable tool (A) into the gap between the luggage lower
finisher (RH) (2) and the top of luggage room lamp (1) to release
the pawl.
: Pawl
2. Disconnect the harness connector from the luggage room lamp and remove.
INSTALLATION
Installation is in the reverse order of removal.
Bulb Replacement
INFOID:0000000011279234
WARNING:
Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.
CAUTION:
• Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from
bulb surface.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may
affect the performance of lamp.
1. Remove luggage room lamp. Refer to
INL-60, "Removal and Installation"
2. Release pawls using a suitable tool and remove luggage room
lamp cover (1).
: Pawl
3. Push the tab to release one bulb end, then grasp the luggage
room lamp bulb (3) and pull out the second end to remove.
4. Install luggage room lamp bulb (3) to luggage room lamp (2).
5. Install luggage room lamp cover (1).
6. Install luggage room lamp. Refer to Refer to
INL-60, "Removal and Installation"
.
ALLIA1385ZZ
ALLIA1387ZZ
METER CONTROL SWITCH
INL-61
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
METER CONTROL SWITCH
Removal and Installation
INFOID:0000000011279235
REMOVAL
1. Remove the instrument finisher A. Refer to
IP-15, "INSTRUMENT FINISHER A : Removal and Installa-
2. Remove the screws (A) and the meter control switch (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1585ZZ
INL-62
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb Specifications
INFOID:0000000011279236
*:Always check with the parts department for the latest parts information.
Item
Wattage (W)*
Map lamp
( – )
Room lamp (if equipped)
8
Vanity mirror lamp
1.8
Personal lamp (if equipped)
8
Luggage room lamp
5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст