Nissan Rogue. Manual — part 210
DAS
COMPONENT PARTS
DAS-11
< SYSTEM DESCRIPTION >
[DRIVER ASSISTANCE SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000011277164
A. View with glove box assembly removed B. View with front bumper fascia removed C. View with front bumper fascia removed
D. Rear under body LH
E. View with luggage rear plate removed F.
View with back door finisher removed
ALOIA0233ZZ
No.
Component
Function
1.
Blind spot warning indicator RH
DAS-14, "Blind Spot Warning Indicator LH/RH"
.
2.
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal (wheel speed) to around view monitor via CAN commu-
nication.
Refer to
BRC-7, "Component Parts Location"
for detailed installation location.
3.
ECM
• Transmits engine speed signal to around view monitor control unit via CAN communica-
tion.
• Refer to
EC-14, "Component Parts Location"
for detailed installation location.
DAS-12
< SYSTEM DESCRIPTION >
[DRIVER ASSISTANCE SYSTEM]
COMPONENT PARTS
Distance Sensor
INFOID:0000000011277165
• Distance sensor is installed to the back of the front bumper and
detects a vehicle ahead by using millimeter waves.
• Distance sensor detects radar reflected from a vehicle ahead by
irradiating radar forward and calculates a distance from the vehicle
ahead and relative speed, based on the detected signal.
• Distance sensor transmits the presence/absence of vehicle ahead
and the distance from the vehicle to around view monitor control
unit via CAN communication.
4.
TCM
Refer to
TM-12, "CVT CONTROL SYSTEM : Component Parts Location"
lation location.
5.
BCM
Transmits the turn indicator signal, dimmer signal, and back door switch signal to around
view monitor via CAN communication.
Refer to the following for detailed installation location:
• With Intelligent Key system:
BCS-7, "BODY CONTROL SYSTEM : Component Parts Lo-
.
• Without Intelligent Key system:
BCS-79, "BODY CONTROL SYSTEM : Component Parts
.
6.
Blind spot warning indicator LH
Refer to
DAS-14, "Blind Spot Warning Indicator LH/RH"
7.
Steering switches
Refer to
.
8.
Combination meter
• Description:
.
MWI-6, "METER SYSTEM : Component Parts Location"
for detailed installation
location.
9.
AV control unit
Receives the various systems and camera signals via CAN communication and routes them
to the AV control unit display.
Refer to
AV-80, "Component Parts Location"
for detailed installation location.
10.
Warning system switch
Refer to
DAS-14, "Warning System Switch"
11.
Warning system buzzer
Refer to
DAS-14, "Warning System Buzzer"
.
12.
Steering angle sensor
Transmits the steering angle sensor signal to around view monitor via CAN communication.
Refer to
BRC-7, "Component Parts Location"
for detailed installation location.
13.
Around View
®
Monitor control unit Refer to
DAS-13, "Around View Monitor Control Unit"
14.
Rear view camera washer motor
Refer to
DAS-14, "Rear View Camera Washer Motor"
.
15.
Distance sensor
Refer to
.
16.
Rear view camera air pump motor Refer to
DAS-13, "Rear View Camera Air Pump Motor"
.
17.
Rear view camera washer control
unit
Refer to
DAS-14, "Rear View Camera Washer Control Unit"
18.
Rear view camera
Refer to
.
No.
Component
Function
AWOIA0057ZZ
DAS
COMPONENT PARTS
DAS-13
< SYSTEM DESCRIPTION >
[DRIVER ASSISTANCE SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
Steering Switches
INFOID:0000000011277166
• Steering switches are installed in the steering wheel.
• Settings for driver assistance systems are possible.
• Switch is connected to the combination meter and signals are
transmitted to the around view monitor via CAN communication.
Around View Monitor Control Unit
INFOID:0000000011277167
• The around view monitor control unit is installed behind the glove
box.
• Vehicle width guide lines, predicted course line, vehicle front guid-
ing line and vehicle side line, and vehicle icon are displayed and
combined with camera images.
Rear View Camera Air Pump Motor
INFOID:0000000011277168
• Rear view camera air pump motor is installed to the rear left under-
body.
• Air pump is activated and generates compressed air when power
is supplied from the rear view camera washer control unit.
• Compressed air jets out from the air nozzle of rear view camera via
air tube.
Combination Meter
INFOID:0000000011277169
• Displays the system status according to a signal received.
• Operates the buzzer according to the signal from the distance sensor.
Rear View Camera
INFOID:0000000011277170
• The rear view camera is installed in the back door finisher.
• With the mirror processing function, a mirror image is sent as if it is
viewed by a rear view mirror.
• Power for the camera is supplied from the around view monitor
control unit, and the image at the rear of the vehicle is sent to the
around view monitor control unit.
• The rear view camera is equipped with a washer nozzle and air
nozzle for cleaning camera. A check valve is installed to the tube
connected to the washer nozzle.
ALNIA1594ZZ
JSOIA0646ZZ
AWOIA0060ZZ
AWOIA0062ZZ
DAS-14
< SYSTEM DESCRIPTION >
[DRIVER ASSISTANCE SYSTEM]
COMPONENT PARTS
Rear View Camera Washer Control Unit
INFOID:0000000011277171
• Rear view camera washer control unit is installed under the lug-
gage rear plate.
• Communicates with around view monitor control unit via serial
communication line.
• Activates air pump and washer pump according to the signal from
around view monitor control unit.
Warning System Buzzer
INFOID:0000000011277172
• Warning system buzzer is installed to the back of the instrument
lower panel LH.
• When a warning buzzer signal is received from the around view
monitor, the buzzer sounds.
Rear View Camera Washer Motor
INFOID:0000000011277173
Washer fluid is sprayed when the rear view camera washer control
unit activates the washer motor.
Blind Spot Warning Indicator LH/RH
INFOID:0000000011277174
• Installed on the front door corner finisher, the blind spot warning indicator warns the driver by lighting/blink-
ing.
• Receives a blind spot warning indicator operation signal from the around view monitor control unit.
Warning System Switch
INFOID:0000000011277175
• Installed to the back of the instrument lower panel LH, the warning system switch is used to activate/deacti-
vate the driver assistance system.
• Transmits a warning system switch signal to the around view monitor control unit.
AWOIA0059ZZ
AWOIA0061ZZ
JMLIA3077ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст