Nissan Rogue. Manual — part 1216
VTL-10
< REMOVAL AND INSTALLATION >
DUCTS AND GRILLES
FRONT FOOT DUCT
FRONT FOOT DUCT : Removal and Installation
INFOID:0000000011280005
REMOVAL
Front foot duct (LH)
1. Remove instrument lower panel (LH). Refer to
IP-23, "Removal and Installation"
2. Remove center console side finisher (LH). Refer to
3. Remove front foot duct (LH) screws (A).
4. Release the pawl and remove front foot duct (LH) (1).
: Pawl
Front foot duct (RH)
1. Remove glove box assembly. Refer to
IP-24, "Removal and Installation"
2. Remove front foot duct (RH) screws (A).
3. Release the pawl and remove front foot duct (RH) (1).
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
FRONT FLOOR DUCT
FRONT FLOOR DUCT : Removal and Installation - Front Floor Connecting Duct
INFOID:0000000011280006
REMOVAL
1. Remove the center console assembly. Refer to
IP-19, "Removal and Installation"
2. Release the pawls and remove front floor connecting duct (1).
: Pawl
NOTE:
LH side shown; RH similar.
INSTALLATION
Installation is in the reverse order of removal.
ALIIA0960ZZ
ALIIA0961ZZ
ALIIA0959ZZ
DUCTS AND GRILLES
VTL-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
FRONT FLOOR DUCT : Removal and Installation - Front Floor Duct
INFOID:0000000011280007
REMOVAL
1. Remove front seat (LH or RH). Refer to
SE-32, "DRIVER SIDE : Removal and Installation"
"PASSENGER SIDE : Removal and Installation"
.
2. Remove center console. Refer to
IP-19, "Removal and Installation"
3. Remove dash side finisher. Refer to
INT-24, "DASH SIDE FINISHER : Removal and Installation"
.
4. Partially remove front floor trim.
5. Release clips using a suitable tool and remove front floor duct
(1).
: Clip
NOTE:
RH side shown; LH similar.
INSTALLATION
Installation is in the reverse order of removal.
ADAPTOR DUCT
ADAPTOR DUCT : Removal and Installation
INFOID:0000000011280008
REMOVAL
1. Remove center console assembly. Refer to
IP-19, "Removal and Installation"
.
2. Remove the adaptor duct.
INSTALLATION
Installation is in the reverse order of removal.
REAR CENTER VENTILATOR DUCT
REAR CENTER VENTILATOR DUCT : Removal and Installation
INFOID:0000000011280009
REMOVAL
1. Remove center console assembly. Refer to
IP-19, "Removal and Installation"
.
ALIIA0957ZZ
VTL-12
< REMOVAL AND INSTALLATION >
DUCTS AND GRILLES
2. Remove screws (A) and rear center ventilator duct (1).
INSTALLATION
Installation is in the reverse order of removal.
Exploded View
INFOID:0000000011280010
DEFROSTER GRILLE
DEFROSTER GRILLE : Removal and Installation
INFOID:0000000011280011
REMOVAL
1. Remove front pillar finishers (LH/RH). Refer to
INT-20, "FRONT PILLAR FINISHER : Removal and Instal-
.
2. Release defroster grille clips using a suitable tool.
ALIIA0962ZZ
1.
Defroster grille
2.
Side ventilator grille (RH)
3.
Center ventilator grille
4.
Side ventilator grille (RH)
AWIIA1868ZZ
DUCTS AND GRILLES
VTL-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
3. Disconnect the harness connectors and remove defroster grille.
INSTALLATION
Installation is in the reverse order of removal.
CENTER VENTILATOR GRILLE
CENTER VENTILATOR GRILLE : Removal and Installation
INFOID:0000000011280012
REMOVAL
1. Release the pawls using a suitable tool and remove center ven-
tilator grille from instrument panel.
: Pawl
2. Disconnect the harness connector (A) from hazard switch (1).
INSTALLATION
Installation is in the reverse order of removal.
SIDE VENTILATOR GRILLE
SIDE VENTILATOR GRILLE : Removal and Installation
INFOID:0000000011280013
REMOVAL
Side ventilator grille (LH)
1. Release the pawls using a suitable tool and remove instrument
side finisher (LH) (1).
: Pawl
ALIIA0969ZZ
ALLIA1415ZZ
ALJIA1394ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст