Nissan Rogue. Manual — part 353
DLK-254
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
REAR DOOR
DOOR HINGE
DOOR HINGE : Removal and Installation
INFOID:0000000011279015
REMOVAL
1. Remove rear door assembly. Refer to
DLK-251, "DOOR ASSEMBLY : Removal and Installation"
2. Remove center pillar lower finisher (rear door lower hinge only). Refer to
LOWER FINISHER : Removal and Installation"
3. Remove rear door hinge bolts and nuts and rear door hinge.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Tighten nuts/bolts to specification. Refer to
• Apply anticorrosive agent onto the hinge mating surface.
• After installation, check rear door open/close and lock/unlock operation.
• After installation, perform the rear door adjustment procedure. Refer to
.
DOOR CHECK LINK
DOOR CHECK LINK : Removal and Installation
INFOID:0000000011279016
REMOVAL
1. Fully close the rear door window.
2. Remove rear door speaker. Refer to
AV-71, "Removal and Installation"
(DISPLAY AUDIO),
(NAVIGATION WITHOUT BOSE) or
AV-376, "Removal and Installation"
(NAV-
IGATION WITH BOSE).
3. Remove rear door check link bolt (body side).
4. Remove rear door check link bolts (door side).
5. Remove rear door check link through the hole in rear door panel.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Tighten bolts to specification. Refer to
• After installation, check rear door open/close and lock/unlock operation.
• Check rear door check link rotating point for poor lubrication. If necessary, apply a suitable multi-
purpose grease.
2015 Rogue NAM
BACK DOOR
DLK-255
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
BACK DOOR
Exploded View
INFOID:0000000011279017
BACK DOOR ASSEMBLY
BACK DOOR ASSEMBLY : Removal and Installation
INFOID:0000000011279018
CAUTION:
• Use two people when removing or installing the back door due to its heavy weight.
• Use shop cloths to protect surrounding components from damage during removal and installation of
back door.
• Perform calibration of automatic back door position information. Refer to
.
REMOVAL
1. Support the back door assembly using a suitable tool.
WARNING:
Bodily injury may occur if back door assembly is not supported properly when removing the back
door spindle unit.
2. Remove spindle units (LH/RH) or back door stays (LH/RH). Refer to
DLK-270, "SPINDLE UNIT : Removal
(WITH AUTOMATIC BACK DOOR) or
DLK-271, "BACK DOOR STAY : Removal and
(WITHOUT AUTOMATIC BACK DOOR).
1.
Back door hinge
2.
Back door striker
3.
Spindle unit hinge (with automatic
back door)
4.
Back door stay hinge
5.
Bumper rubber
6.
Back door
AWKIA2930ZZ
2015 Rogue NAM
DLK-256
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
BACK DOOR
3. Disconnect harness connectors (A) from back door.
4. Remove back door harness grommet, then pull harness from the back door.
5. Disconnect washer tube.
6. Remove washer tube grommet and washer tube from the back door.
7. Remove back door hinge bolts (door side) and back door assembly.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Tighten bolts to specification. Refer to
• Apply anticorrosive agent onto the surface between hinge and door side.
• When reusing stud ball, always apply locking sealant before installing stud ball to back door.
• After installation, perform the back door assembly adjustment procedure. Refer to
• Perform calibration of automatic back door position information. Refer to
.
ALKIA2469ZZ
2015 Rogue NAM
BACK DOOR
DLK-257
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
BACK DOOR ASSEMBLY : Adjustment
INFOID:0000000011279019
Check the clearance and the surface height between back door and each part by visual inspection and tactile
feel. If the clearance and the surface height are out of specification, adjust them according to the adjustment
procedure.
1.
Back door assembly
2.
Roof panel
3.
Rear spoiler
4.
Back door glass
5.
Rear combination lamp
6.
Back-up lamp
7.
Rear fender
8.
Side spoiler
AWKIA2918ZZ
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст