Nissan Rogue. Manual — part 1015
RF-40
< SYMPTOM DIAGNOSIS >
SUNSHADE SYSTEM DOES NOT OPERATE PROPERLY
SUNSHADE SYSTEM DOES NOT OPERATE PROPERLY
Diagnosis Procedure
INFOID:0000000011280153
1.
CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit.
Refer to
(with Intelligent Key System),
BCS-128, "Diagnosis Procedure"
out Intelligent Key System).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check sunshade motor assembly power supply and ground circuit.
RF-30, "SUNSHADE MOTOR ASSEMBLY : Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
AUTO OPERATION DOES NOT OPERATE
RF-41
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
AUTO OPERATION DOES NOT OPERATE
MOONROOF
MOONROOF : Diagnosis Procedure
INFOID:0000000011280154
1.
PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to
RF-25, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Require-
Is the inspection result normal?
YES
>> Moonroof system is normal.
NO
>> GO TO 2.
2.
CHECK MOONROOF SWITCH
Check moonroof switch.
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
SUNSHADE
SUNSHADE : Diagnosis Procedure
INFOID:0000000011280155
1.
PERFORM INITILAZATION PROCEDURE
Refer to
RF-25, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Require-
Is the inspection result normal?
YES
>> Sunshade system is normal.
NO
>> GO TO 2.
2.
CHECK MOONROOF SWITCH
Check moonroof switch.
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
RF-42
< SYMPTOM DIAGNOSIS >
ANTI-PINCH FUNCTION DOES NOT OPERATE
ANTI-PINCH FUNCTION DOES NOT OPERATE
MOONROOF
MOONROOF : Diagnosis Procedure
INFOID:0000000011280156
1.
PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to
RF-25, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Require-
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform basic inspection. Refer to
.
2.
RETEST THE ANTI-PINCH FUNCTION
Check anti-pinch operation. Refer to
RF-25, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT :
.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace the moonroof motor assembly. Refer to
RF-52, "Removal and Installation"
SUNSHADE
SUNSHADE : Diagnosis Procedure
INFOID:0000000011280157
1.
CHECK SUNSHADE MECHANISM
Check the following:
• Operation malfunction caused by sunshade mechanism deformation, pinched harness or other foreign
materials
• Operation malfunction and interference with other parts by poor installation
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
PERFORM INITILAZATION PROCEDURE
Perform anti-pinch procedure.
Refer to
RF-25, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Require-
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 1.
3.
RETEST THE ANTI-PINCH FUNCTION
Check anti-pinch operation. Refer to
RF-25, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT :
.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace the sunshade motor assembly. Refer to
RETAINED POWER OPERATION DOES NOT OPERATE PROPERLY
RF-43
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
RETAINED POWER OPERATION DOES NOT OPERATE PROPERLY
Diagnosis Procedure
INFOID:0000000011280158
1.
CHECK FRONT DOOR SWITCH
Check (LH and RH) front door switches.
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст