Nissan Rogue. Manual — part 1006
RF-4
< PREPARATION >
PREPARATION
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000011280117
The actual shape of the tools may differ from those illustrated here.
Commercial Service Tools
INFOID:0000000011280118
Tool number
(TechMate No.)
Tool name
Description
—
(J-39570)
Chassis Ear
Locating the noise
—
(J-50397)
NISSAN Squeak and Rattle
Kit
Repairing the cause of noise
—
(J-46534)
Trim Tool Set
Removing trim components
SIIA0993E
ALJIA1232ZZ
AWJIA0483ZZ
(TechMate No.)
Tool name
Description
(J-39565)
Engine Ear
Locating the noise
( — )
Power tool
Loosening nuts, screws and bolts
SIIA0995E
PIIB1407E
COMPONENT PARTS
RF-5
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
MOONROOF
MOONROOF : Component Parts Location
INFOID:0000000011280119
MOONROOF : Component Description
INFOID:0000000011280120
ALKIA3620ZZ
A.
Moonroof switch
B.
View with headliner removed
C.
Combination meter
D.
Behind instrument panel (LH)
E.
View with LH door open (RH similar)
No.
Component
Function
1.
Moonroof switch
Transmits open/close operation signal to the moonroof and sunshade motor assembly.
2.
Sunshade motor
The sunshade motor and CPU are integrated into one unit that opens/closes by input from the
moonroof switch operation.
RF-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
3.
Moonroof motor
The moonroof motor and CPU are integrated into one unit that opens/closes by input from the
moonroof switch operation.
4.
Combination meter
Transmits the vehicle speed signal to BCM via CAN communication.
5.
BCM
Supplies the power supply to the moonroof & sunshade motor assembly.
6.
Front door switch LH
Detects door open/close condition and transmits to BCM.
No.
Component
Function
SYSTEM
RF-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
SYSTEM
MOONROOF
MOONROOF : System Diagram
INFOID:0000000011280121
MOONROOF & SUNSHADE
MOONROOF : System Description
INFOID:0000000011280122
MOONROOF SYSTEM
INPUT/OUTPUT SIGNAL CHART
MOONROOF AND SUNSHADE OPERATION
• Moonroof motor and sunshade motor assembly operates with the power supply that is output from the BCM
while the ignition switch is ON or retained power is operating.
• Tilt up/down & slide open/close signals from the moonroof switch enable the moonroof motor and sunshade
motor to move.
• Moonroof motor assembly receives a vehicle speed signal from the combination meter and controls the
moonroof motor torque of tilt down at the time of high speed operation.
AUTO OPERATION
Moonroof and Sunshade AUTO feature makes it possible to slide open and slide closed the moonroof and
sunshade without holding the moonroof switch in the slide open/close position.
RETAINED POWER OPERATION
• Retained power operation is an additional power supply function that enables the moonroof and sunshade
system to operate for 45 seconds after the ignition switch is turned off and the front doors remain closed.
Retained power function cancel conditions:
ALLIA1381GB
Item
Input signal to moonroof motor assem-
bly
Moonroof motor function
Actuator
Moonroof switch
Moonroof signal (tilt up/down or slide
open/close)
Receives signal and moves
the moonroof and sunshade
assembly to the correct posi-
tion.
Moonroof motor and/or Sun-
shade motor
Sunshade signal (slide open/close)
Combination meter
Vehicle speed signal
Receives speed signal and de-
termines the amount of torque
the motor requires.
BCM
RAP signal
Retained power after the key is
turned off and the front doors
stay closed.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст