Nissan Rogue. Manual — part 987
PWC-30
< DTC/CIRCUIT DIAGNOSIS >
POWER SUPPLY AND GROUND CIRCUIT
DTC/CIRCUIT DIAGNOSIS
POWER SUPPLY AND GROUND CIRCUIT
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM)
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis
Procedure
INFOID:0000000011384974
Regarding Wiring Diagram information, refer to
.
1.
CHECK FUSE
Check that the following fuse is not blown.
Is the fuse blown?
YES
>> Replace the blown fuse after repairing the affected circuit.
NO
>> GO TO 2.
2.
CHECK POWER SUPPLY CIRCUIT
1. Disconnect BCM connector M20.
2. Check voltage between BCM connector M20 and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness or connectors.
3.
CHECK GROUND CIRCUIT
Check continuity between BCM connector M20 and ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Repair or replace harness or connectors.
BCM (BODY CONTROL SYSTEM) (WITHOUT INTELLIGENT KEY SYSTEM)
BCM (BODY CONTROL SYSTEM) (WITHOUT INTELLIGENT KEY SYSTEM) : Diag-
nosis Procedure
INFOID:0000000011384975
Regarding Wiring Diagram information, refer to
1.
CHECK FUSE
Terminal No.
Signal name
Fuse No.
161
BCM power supply
7 (10A)
BCM
Ground
Voltage
(Approx.)
Connector
Terminal
M20
161
—
Battery voltage
BCM
Ground
Continuity
Connector
Terminal
M20
170
—
Yes
171
POWER SUPPLY AND GROUND CIRCUIT
PWC-31
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
Check that the following fuse is not blown.
Is the fuse blown?
YES
>> Replace the blown fuse after repairing the affected circuit.
NO
>> GO TO 2.
2.
CHECK POWER SUPPLY CIRCUIT
1. Disconnect BCM connector M20.
2. Check voltage between BCM connector M20 and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness or connectors.
3.
CHECK GROUND CIRCUIT
Check continuity between BCM connector M20 and ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Repair or replace harness or connectors.
POWER WINDOW MAIN SWITCH
POWER WINDOW MAIN SWITCH : Diagnosis Procedure
INFOID:0000000011278690
1.
CHECK POWER SUPPLY CIRCUIT 1
1. Turn ignition OFF.
2. Disconnect main power window and door lock/unlock switch connector.
3. Turn ignition switch ON.
4. Check voltage between main power window and door lock/unlock switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 4.
2.
CHECK POWER SUPPLY CIRCUIT 2
1. Check voltage between main power window and door lock/unlock switch harness connector and ground.
Terminal No.
Signal name
Fuse No.
161
BCM power supply
7 (10A)
BCM
Ground
Voltage
(Approx.)
Connector
Terminal
M20
161
—
Battery voltage
BCM
Ground
Continuity
Connector
Terminal
M20
170
—
Yes
171
(+)
(–)
Voltage
(Approx.)
Main power window and door lock/unlock switch
Connector
Terminal
D6
10
Ground
Battery voltage
PWC-32
< DTC/CIRCUIT DIAGNOSIS >
POWER SUPPLY AND GROUND CIRCUIT
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair power supply circuit.
3.
CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Check continuity between main power window and door lock/unlock switch harness connector and
ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Repair or replace harness.
4.
CHECK HARNESS CONTINUITY 1
1. Turn ignition switch OFF.
2. Disconnect power window relay connector.
3. Check continuity between power window relay harness connector and main power window and door lock/
unlock switch harness connector.
4. Check continuity between power window relay harness connector and ground.
Is the inspection result normal?
YES
>> Refer to
.
NO
>> Repair or replace harness.
FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
FRONT POWER WINDOW SWITCH (PASSENGER SIDE) : Diagnosis Procedure
INFOID:0000000011278691
1.
CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect power window and door lock/unlock switch RH connector.
3. Turn ignition switch ON.
4. Check voltage between power window and door lock/unlock switch RH harness connector and ground.
(+)
(–)
Voltage
(Approx.)
Main power window and door lock/unlock switch
Connector
Terminal
D8
18
Ground
Battery voltage
Main power window and door lock/unlock switch
Ground
Continuity
Connector
Terminal
D6
1
Yes
Power window relay
Main power window and door lock/unlock switch
Continuity
Connector
Terminal
Connector
Terminal
M58
3
D6
10
Yes
Power window relay
Ground
Continuity
Connector
Terminal
M58
3
No
(+)
(–)
Condition
Voltage
(Approx.)
Power window and door lock/unlock switch RH
Connector
Terminal
D112
8
Ground
Ignition switch ON
Battery voltage
POWER SUPPLY AND GROUND CIRCUIT
PWC-33
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
Is the inspection result normal?
YES
>> Inspection End.
NO
>> GO TO 2.
2.
CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect power window relay connector.
3. Check continuity between power window relay harness connector and power window and door lock/
unlock switch RH harness connector.
4. Check continuity between the power window relay harness connector and ground.
Is the inspection result normal?
YES
>> Refer to
.
NO
>> Repair or replace harness.
REAR POWER WINDOW SWITCH
REAR POWER WINDOW SWITCH : Diagnosis Procedure
INFOID:0000000011278692
1.
CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect rear power window switch connector.
3. Turn ignition switch ON.
4. Check voltage between rear power window switch harness connector and ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> GO TO 2.
2.
CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect power window relay connector.
3. Check continuity between power window relay harness connector and rear power window switch harness
connector.
4. Check continuity between power window relay harness connector and ground.
Power window relay
Power window and door lock/unlock switch RH
Continuity
Connector
Terminal
Connector
Terminal
M58
3
D112
8
Yes
Power window relay
Ground
Continuity
Connector
Terminal
M58
3
No
(+)
(–)
Condition
Voltage
(Approx.)
Rear power window switch
Connector
Terminal
LH
D204
1
Ground
Ignition switch ON
Battery voltage
RH
D304
Power window relay
Rear power window switch
Continuity
Connector
Terminal
Connector
Terminal
M58
3
LH
D204
1
Yes
RH
D304
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст