Nissan Rogue. Manual — part 163
BRAKE CONTROL SYSTEM
BRC-63
< WIRING DIAGRAM >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
AAFIA0304GB
BRC-64
< BASIC INSPECTION >
[VDC/TCS/ABS]
DIAGNOSIS AND REPAIR WORK FLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000011280589
DETAILED FLOW
1.
INTERVIEW FROM THE CUSTOMER
Clarify customer complaints before inspection. First of all, perform an interview utilizing
and reproduce the symptom as well as fully understand it. Ask customer about his/her complaints
carefully. Check symptoms by driving vehicle with customer, if necessary.
CAUTION:
Customers are not professional. Never guess easily like “maybe the customer means that...,” or “
maybe the customer mentions this symptom”.
>> GO TO 2.
2.
CHECK SYMPTOM
Reproduce the symptom that is indicated by the customer, based on the information from the customer
obtained by interview. Also check that the symptom is not caused by fail-safe mode. Refer to
.
CAUTION:
When the symptom is caused by normal operation, fully inspect each portion and obtain the under-
standing of customer that the symptom is not caused by a malfunction.
>> GO TO 3.
3.
PERFORM THE SELF DIAGNOSTIC
With CONSULT
1. Turn the ignition switch OFF
→ ON.
CAUTION:
Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
2. Repeat step 1 two or more times.
3. Perform “Self Diagnostic Result” of “ABS”.
Is DTC detected?
YES
>> Record or print “Self Diagnostic Result” and freeze frame data (FFD). GO TO 4.
NO
>> GO TO 6.
4.
RECHECK THE SYMPTOM
With CONSULT
1. Erase “Self Diagnostic Result” of “ABS”.
2. Turn the ignition switch OFF
→ ON → OFF.
CAUTION:
Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
3. Perform DTC confirmation procedures for the error-detected system.
NOTE:
If some DTCs are detected at the some time, determine the order for performing the diagnosis based on
BRC-52, "DTC Inspection Priority Chart"
Is any DTC detected?
YES
>> GO TO 5.
NO
>> Check harness and connectors based on the information obtained by interview. Refer to
.
5.
REPAIR OR REPLACE ERROR-DETECTED PART
1. Repair or replace error-detected parts.
2. Reconnect part or connector after repairing or replacing.
3. When DTC is detected, erase “Self Diagnostic Result” of “ABS”.
DIAGNOSIS AND REPAIR WORK FLOW
BRC-65
< BASIC INSPECTION >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
CAUTION:
• Turn the ignition switch OFF
→ ON → OFF after erase self diagnostic result.
• Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
>> GO TO 7.
6.
IDENTIFY ERROR-DETECTED SYSTEM BY SYMPTOM DIAGNOSIS
Estimate error-detected system based on symptom diagnosis and perform inspection.
Can the error-detected system be identified?
YES
>> GO TO 7.
NO
>> Check harness and connectors based on the information obtained by interview. Refer to
.
7.
FINAL CHECK
With CONSULT
1. Check the reference value for “ABS”.
2. Recheck the symptom and check that the symptom is not reproduced on the same conditions.
Is the symptom reproduced?
YES
>> GO TO 3.
NO
>> Inspection End.
Diagnostic Work Sheet
INFOID:0000000011280590
Description
• In general, customers have their own criteria for a problem. Therefore, it is important to understand the
symptom and status well enough by asking the customer about his/her concerns carefully. To systemize all
the information for the diagnosis, prepare the interview sheet referring to the interview points.
• In some cases, multiple conditions that appear simultaneously may cause a DTC to be detected.
INTERVIEW SHEET SAMPLE
Interview sheet
Customer
name
MR/MS
Registration
number
Initial year
registration
Vehicle type
VIN
Storage date
Engine
Mileage
km (Mile)
Symptom
Does not operate ( ) function
Warning lamp for ( ) turns ON.
Noise
Vibration
Other
( )
First occurrence
Recently Other ( )
Frequency of occurrence
Always Under a certain conditions of Sometimes ( time(s)/day)
Climate con-
ditions
Irrelevant
Weather
Fine Cloud Rain Snow Others ( )
Temperature
Hot Warm Cool Cold Temperature [Approx.
°C (°F)]
Relative humidity
High Moderate Low
Road conditions
Urban area Suburb area Highway
Mountainous road (uphill or downhill) Rough road
Operating condition, etc.
Irrelevant
When engine starts During idling
During driving During acceleration At constant speed driving
During deceleration
During cornering (right curve or left curve)
When steering wheel is steered (to right or to left)
BRC-66
< BASIC INSPECTION >
[VDC/TCS/ABS]
DIAGNOSIS AND REPAIR WORK FLOW
Other conditions
Memo
Interview sheet
Customer
name
MR/MS
Registration
number
Initial year
registration
Vehicle type
VIN
Storage date
Engine
Mileage
km (Mile)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст