Nissan Rogue. Manual — part 271

DAS

C1BC4-00 DECEL G SENSOR

DAS-255

< DTC/CIRCUIT DIAGNOSIS >

[CHASSIS CONTROL]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

NO

>> Inspection End.

DAS-256

< DTC/CIRCUIT DIAGNOSIS >

[CHASSIS CONTROL]

C1BC5-00 SIDE G SENSOR

C1BC5-00 SIDE G SENSOR

DTC Description

INFOID:0000000011277426

DTC DETECTION LOGIC

POSSIBLE CAUSE

• Yaw rate/side/decel G sensor [integrated in ABS actuator and electric unit (control unit)]

• ABS actuator and electric unit (control unit)

• Chassis control module

FAIL-SAFE

The following functions are suspended:

• Active Trace Control function

DTC CONFIRMATION PROCEDURE

1.

PRECONDITIONING

If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF

and wait at least 10 seconds before conducting the next test.

>> GO TO 2.

2.

CHECK DTC DETECTION

With CONSULT

1. Turn the ignition switch OFF to ON.

CAUTION:

Be sure to wait of 10 seconds after turning ignition switch OFF or ON.

2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BC5-00” detected?

YES

>> Proceed to

DAS-256, "Diagnosis Procedure"

.

NO-1 >> To check malfunction symptom before repair: Refer to

GI-44, "Intermittent Incident"

.

NO-2 >> Confirmation after repair: Inspection End.

Diagnosis Procedure

INFOID:0000000011277427

1.

CHECK SIDE G SENSOR SYSTEM

With CONSULT

Perform “Self Diagnostic Result” of “ABS”.
Is DTC detected?

YES

>> Check the DTC. Refer to

BRC-53, "DTC Index"

.

NO

>> GO TO 2.

2.

PERFORM SELF-DIAGNOSIS

With CONSULT

1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.

2. Turn the ignition switch OFF and wait for 10 seconds or more.

3. Turn the ignition switch ON.

4. Perform “All DTC Reading”.
Is DTC “C1BC5-00”, “U1000-00” or other DTC detected?

YES (“C1BC5-00”)>>Replace the chassis control module. Refer to

DAS-286, "Removal and Installation"

.

YES (“U1000-00”)>>Refer to

DAS-260, "Diagnosis Procedure"

.

YES (other DTC)>>Check the DTC.

DTC

Display Item

(Trouble diagnosis content)

Malfunction detected condition

C1BC5-00

SIDE G SENSOR
(Side G sensor)

When a malfunction is detected in side G sensor system.

DAS

C1BC5-00 SIDE G SENSOR

DAS-257

< DTC/CIRCUIT DIAGNOSIS >

[CHASSIS CONTROL]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

NO

>> Inspection End.

DAS-258

< DTC/CIRCUIT DIAGNOSIS >

[CHASSIS CONTROL]

C1BC6-00 PRESSURE SENSOR

C1BC6-00 PRESSURE SENSOR

DTC Description

INFOID:0000000011277428

DTC DETECTION LOGIC

POSSIBLE CAUSE

• ABS actuator and electric unit (control unit)

• Chassis control module

FAIL-SAFE

The following functions are suspended:

• Active Trace Control function

• Active Ride Control (brake) function

DTC CONFIRMATION PROCEDURE

1.

PRECONDITIONING

If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF

and wait at least 10 seconds before conducting the next test.

>> GO TO 2.

2.

CHECK DTC DETECTION

With CONSULT

1. Turn the ignition switch OFF to ON.

CAUTION:

Be sure to wait of 10 seconds after turning ignition switch OFF or ON.

2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BC6-00” detected?

YES

>> Proceed to

DAS-258, "Diagnosis Procedure"

.

NO-1 >> To check malfunction symptom before repair: Refer to

GI-44, "Intermittent Incident"

.

NO-2 >> Confirmation after repair: Inspection End.

Diagnosis Procedure

INFOID:0000000011277429

1.

CHECK BRAKE FLUID PRESSURE SYSTEM

With CONSULT

Perform “Self Diagnostic Result” of “ABS”.
Is DTC detected?

YES

>> Check the DTC. Refer to

BRC-53, "DTC Index"

.

NO

>> GO TO 2.

2.

PERFORM SELF-DIAGNOSIS

With CONSULT

1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.

2. Turn the ignition switch OFF and wait for 10 seconds or more.

3. Turn the ignition switch ON.

4. Perform “All DTC Reading”.
Is DTC “C1BC6-00”, “U1000-00” or other DTC detected?

YES (“C1BC6-00”)>>Replace the chassis control module. Refer to

DAS-286, "Removal and Installation"

.

YES (“U1000-00”)>>Refer to

DAS-260, "Diagnosis Procedure"

.

YES (other DTC)>>Check the DTC.

DTC

Display Item

(Trouble diagnosis content)

Malfunction detected condition

C1BC6-00

PRESSURE SENSOR
(Pressure sensor)

When a malfunction is detected in brake fluid pressure system.