Nissan Rogue. Manual — part 120
BCS-86
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
SYSTEM
SHIPPING MODE CONTROL SYSTEM
SHIPPING MODE CONTROL SYSTEM : System Description
INFOID:0000000011280239
SYSTEM DIAGRAM
DESCRIPTION
• BCM switches the status (shipping mode or normal mode) by itself according to the extended storage fuse
switch condition, and transmits shipping mode status signal to combination meter and each unit via CAN
communication.
• When shipping mode function operates, each control unit does not detect DTCs.
• BCM control functions are limited in shipping mode. Refer to
.
• The combination meter displays extended storage fuse warning message* on the information display, and
turns the turn signal indicator lamp (LH/RH) ON, when BCM is in shipping mode.
*: When shipping mode function operates, “SHIPPING MODE ON PUSH STORAGE FUSE” is displayed.
JMMIA1403GB
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-87
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
INFOID:0000000011280240
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions.
DOOR LOCK
DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)
INFOID:0000000011280241
SELF DIAGNOSTIC RESULT
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic Result
The BCM self diagnostic results are displayed.
Data Monitor
The BCM input/output data is displayed in real time.
Active Test
The BCM activates outputs to test components.
Work support
The settings for BCM functions can be changed.
Configuration
• The vehicle specification can be read and saved.
• The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr
The result of transmit/receive diagnosis of CAN communication is displayed.
System
Sub System
Direct Diagnostic Mode
E
cu
Id
en
tifi
ca
tio
n
Se
lf Di
ag
no
st
ic Re
su
lt
Da
ta
Mo
ni
tor
A
cti
ve
T
est
W
o
rk support
Co
nf
igu
rat
ion
CA
N Diag
Su
pp
ort Mn
tr
Door lock
DOOR LOCK
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Remote keyless entry system
MULTI REMOTE ENT
×
Exterior lamp
HEADLAMP
×
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps FLASHER
×
×
Combination switch
COMB SW
×
BCM
BCM
×
×
×
×
×
Immobilizer
IMMU
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
Back door open
TRUNK
×
Vehicle security system
THEFT ALM
×
×
×
RAP system
RETAINED PWR
×
TPMS
AIR PRESSURE MONITOR
×
×
×
×
BCS-88
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
* : Initial setting
REAR DEFOGGER
REAR DEFOGGER : CONSULT Function (BCM - REAR DEFOGGER)
INFOID:0000000011280242
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
Monitor Item [Unit]
Description
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
DOOR SW-BK [On/Off]
Indicates condition of back door switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
KEY CYL LK-SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN-SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
Test Item
Description
DOOR LOCK
This test is able to check door lock operation [ALL LOCK/ALL UNLK].
Support Item
Setting
Description
DOOR LOCK-UNLOCK SET
On*
Automatic door locks function ON.
Off
Automatic door locks function OFF.
AUTO UNLOCK TYPE
MODE2
Driver door only unlocks automatically.
MODE1*
All doors unlock automatically.
AUTO LOCK FUNCTION
MODE3
This mode is not used.
MODE2
Doors lock automatically when shifted out of P (park).
MODE1*
Doors lock automatically when vehicle speed reaches 24 km/h (15 mph).
Off
—
AUTO UNLOCK FUNCTION
MODE3
This mode is not used.
MODE2
Doors unlock automatically when shifted into P (park).
MODE1*
Doors unlock automatically when ignition is switched from ON to OFF.
Off
—
Monitor Item [Unit]
Description
REAR DEF SW [On/Off]
Indicates condition of rear window defogger switch.
Test Item
Description
REAR DEFOGGER
This test is able to check rear window defogger operation [Off/On].
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-89
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
* : Initial setting
BUZZER
BUZZER : CONSULT Function (BCM - BUZZER)
INFOID:0000000011280243
DATA MONITOR
ACTIVE TEST
INT LAMP
INT LAMP : CONSULT Function (BCM - INT LAMP)
INFOID:0000000011280244
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
Support Item
Setting
Description
SET R-DEF TIMER
MODE3
Rear defogger turns OFF after 1 minute.
MODE2
Rear defogger remains ON until turned OFF.
MODE1*
Rear defogger turns OFF after 15 minutes.
Monitor Item [Unit]
Description
TAIL LAMP SW [On/Off]
Indicates condition of combination switch.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
Test Item
Description
SEAT BELT WARN TEST
This test is able to check seat belt warning chime operation [On/Off].
LIGHT WARN ALM
This test is able to check light warning chime operation [On/Off].
REVERSE WARNING
This test is able to check reverse warning chime operation [On/Off].
ID REGIST WARNING
This test is able to check TPMS sensor ID regist warning chime operation [On/Off].
Monitor Item [Unit]
Description
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
DOOR SW-BK [On/Off]
Indicates condition of back door switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
KEY CYL LK-SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN-SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
RKE-LOCK [On/Off]
Indicates condition of lock signal from Intelligent Key.
RKE-UNLOCK [On/Off]
Indicates condition of unlock signal from Intelligent Key.
Test Item
Description
INT LAMP
This test is able to check interior room lamp operation [On/Off].
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст