Nissan Rogue. Manual — part 223
DAS
DRIVER ASSISTANCE SYSTEMS
DAS-63
< WIRING DIAGRAM >
[DRIVER ASSISTANCE SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
AAOIA0215GB
DAS-64
< BASIC INSPECTION >
[DRIVER ASSISTANCE SYSTEM]
DIAGNOSIS AND REPAIR WORK FLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000011277201
OVERALL SEQUENCE
DETAILED FLOW
1.
INTERVIEW FOR MALFUNCTION
It is also important to clarify the customer concerns before starting the inspection. Interview the customer
about the concerns carefully and understand the symptoms fully.
JSOIA0485GB
DAS
DIAGNOSIS AND REPAIR WORK FLOW
DAS-65
< BASIC INSPECTION >
[DRIVER ASSISTANCE SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
NOTE:
The customers are not professionals. Never assume that “maybe the customer means···” or “maybe the cus-
tomer mentioned this symptom”.
>> GO TO 2.
2.
SELF-DIAGNOSIS WITH CONSULT
1. Perform “All DTC Reading”.
2. Check for DTC detected in “Self Diagnostic Result” of the following:
-
“DISTANCE SENSOR”
-
“AROUND VIEW MONITOR”
Is any DTC detected?
YES
>> GO TO 5.
NO
>> GO TO 3.
3.
ACTION TEST
Perform the following system action test to check the system operation:
• LDW refer to
• BSW refer to
.
• MOD refer to
.
Check if any other malfunctions occur.
>> GO TO 4.
4.
SYMPTOM DIAGNOSIS
Perform the applicable diagnosis according to the diagnosis chart by symptom. Refer to
.
>> GO TO 6.
5.
TROUBLE DIAGNOSIS BY DTC
Perform trouble diagnosis for detected DTC of the following:
• “DISTANCE SENSOR”: Refer to
.
• “AROUND VIEW MONITOR”: Refer to
AV-252, "WITH DRIVER ASSISTANCE SYSTEM : DTC Index"
>> GO TO 6.
6.
MALFUNCTIONING PART REPAIR
Repair or replace the identified malfunctioning parts.
>> GO TO 7.
7.
REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT)
1. Erase “Self Diagnostic Result”.
2. Perform “All DTC Reading” again after repairing or replacing the specific items.
3. Check if any DTC is detected in “Self Diagnostic Result” of the following:
-
“DISTANCE SENSOR”
-
“AROUND VIEW MONITOR”
Is any DTC detected?
YES
>> GO TO 5.
NO
>> GO TO 8.
8.
REPAIR CHECK (ACTION TEST)
Perform the following system action test. Check that the malfunction symptom is solved or no other symptoms
occur.
Is there a malfunction symptom?
YES
>> GO TO 4.
DAS-66
< BASIC INSPECTION >
[DRIVER ASSISTANCE SYSTEM]
DIAGNOSIS AND REPAIR WORK FLOW
NO
>> Inspection End.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст