Nissan Rogue. Manual — part 358
DLK-274
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
FUEL FILLER LID OPENER
2. Remove screws (2) and fuel filler lid (1).
3. Remove fuel filler lid spring (1) and bumper rubber (2) from fuel
filler lid (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid open/close, lock/unlock operation.
FUEL FILLER LID LOCK
FUEL FILLER LID LOCK : Removal and Installation
INFOID:0000000011279046
REMOVAL
1. Remove luggage side lower finisher (RH). Refer to
INT-34, "LUGGAGE SIDE LOWER FINISHER :
Removal and Installation - With Third Row Seat"
LOWER FINISHER : Removal and Installation - Without Third Row Seat"
(Without Third Row Seat).
2. Disconnect the fuel filler lid release cable (1) from the fuel filler
lid lock (2).
3. Rotate fuel filler lid lock to release pawls and remove.
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid open/close, lock/unlock operation.
FUEL FILLER LID RELEASE CABLE
FUEL FILLER LID RELEASE CABLE : Removal and Installation
INFOID:0000000011279047
REMOVAL
ALKIA3417ZZ
ALKIA3418ZZ
ALKIA3419ZZ
2015 Rogue NAM
FUEL FILLER LID OPENER
DLK-275
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
1. Partially remove front floor trim. Refer to
INT-26, "Removal and Installation"
.
2. Remove rear floor trim. Refer to
INT-26, "Removal and Installation"
3. Remove the fuel filler lid/hood lock release handle bolts (A)
4. Disconnect the fuel filler lid release cable (2) from fuel filler lid
release handle (1).
5. Disconnect the fuel filler lid release cable (1) from fuel filler lid
lock (2).
6. Release the clips and remove fuel filler lid release cable.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid open/close, lock/unlock operation.
FUEL FILLER LID RELEASE HANDLE
FUEL FILLER LID RELEASE HANDLE : Removal and Installation
INFOID:0000000011279048
REMOVAL
1. Remove fuel filler lid/hood lock release handle bolts (A).
2. Disconnect fuel filler lid release cable (2) from fuel filler lid
release handle (1).
3. Disconnect hood lock release cable (4) from hood lock release
handle (3).
4. Remove fuel filler lid release handle.
INSTALLATION
Installation is in the reverse order of removal.
ALKIA3421ZZ
ALKIA3420ZZ
ALKIA3422ZZ
2015 Rogue NAM
DLK-276
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
DOOR SWITCH
DOOR SWITCH
Removal and Installation
INFOID:0000000011279049
REMOVAL
1. Remove the door switch bolt (A).
2. Disconnect the harness connector from the door switch (1) and
remove.
INSTALLATION
Installation is in the reverse order of removal.
ALKIA3351ZZ
2015 Rogue NAM
DOOR REQUEST SWITCH
DLK-277
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR REQUEST SWITCH
DRIVER SIDE
DRIVER SIDE : Removal and Installation
INFOID:0000000011279050
The driver side door request switch and driver side outside handle are serviced as an assembly. Refer to
264, "OUTSIDE HANDLE : Removal and Installation"
PASSENGER SIDE
PASSENGER SIDE : Removal and Installation
INFOID:0000000011279051
The passenger side door request switch and passenger side outside handle are serviced as an assembly.
DLK-264, "OUTSIDE HANDLE : Removal and Installation"
BACK DOOR
BACK DOOR : Removal and Installation
INFOID:0000000011279052
REMOVAL
1. Remove back door finisher. Refer to
INT-38, "Removal and Installation"
.
2. Disconnect the harness connector from the back door request switch.
3. Release pawls and remove back door request switch.
INSTALLATION
Installation is in the reverse order of removal.
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст