Nissan Rogue. Manual — part 657
BOTH SIDE HEADLAMPS (HI) ARE NOT TURNED ON
EXL-257
< SYMPTOM DIAGNOSIS >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
BOTH SIDE HEADLAMPS (HI) ARE NOT TURNED ON
Description
INFOID:0000000011280897
Both side headlamps (HI) are not turned ON when setting to the lighting switch HI or PASS.
Diagnosis Procedure
INFOID:0000000011280898
1.
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to
(with Intelligent Key system) or
(without Intelligent Key system).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning part.
2.
CHECK HEADLAMP (HI) REQUEST SIGNAL INPUT
CONSULT DATA MONITOR
1. Select “HEADLAMP (HI)” in “Data Monitor” of “IPDM E/R”.
2. With operating the lighting switch, check the monitor status.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
(with Intelligent Key system) or
135, "Removal and Installation"
(without Intelligent Key system).
3.
HEADLAMP (HI) CIRCUIT INSPECTION
Check headlamp (HI) circuit. Refer to
(RH).
Is the inspection result normal?
YES
>> Refer to
GI-44, "Intermittent Incident"
.
NO
>> Repair or replace the malfunctioning part.
Monitor item
Condition
Monitor status
HEADLAMP (HI)
Lighting switch
(2ND)
HI or PASS
On
LO
Off
EXL-258
< SYMPTOM DIAGNOSIS >
[LED HEADLAMP]
BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON
BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON
Description
INFOID:0000000011280899
Both side headlamps (LO) are not turned ON in any condition.
Diagnosis Procedure
INFOID:0000000011280900
1.
CHECK COMBINATION SWITCH
Check combination switch. Refer to
(with Intelligent Key system) or
(without Intelligent Key system).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning part.
2.
CHECK HEADLAMP (LO) REQUEST SIGNAL INPUT
CONSULT DATA MONITOR
1. Select “HEADLAMP (LO)” in “Data Monitor” of “IPDM E/R”.
2. With operating the lighting switch, check the monitor status.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
(with Intelligent Key system) or
135, "Removal and Installation"
(without Intelligent Key system).
3.
HEADLAMP (LO) CIRCUIT INSPECTION
Check headlamp (LO) circuit. Refer to
(LH) or
Is the inspection result normal?
YES
>> Refer to
GI-44, "Intermittent Incident"
.
NO
>> Repair or replace the malfunctioning part.
Monitor item
Condition
Monitor status
HEADLAMP (LO)
Lighting switch
2ND
On
OFF
Off
PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMPS ARE NOT
TURNED ON
EXL-259
< SYMPTOM DIAGNOSIS >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMPS ARE NOT
TURNED ON
Description
INFOID:0000000011280901
The parking, license plate, side marker, tail lamps and each illumination are not turned ON in any condition.
Diagnosis Procedure
INFOID:0000000011280902
1.
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to
(with Intelligent Key system) or
(without Intelligent Key system).
Is the combination switch normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning part.
2.
CHECK TAIL LAMP REQUEST SIGNAL INPUT
CONSULT DATA MONITOR
1. Select “TAIL LAMP” in “Data Monitor” of “IPDM E/R”.
2. With operating the lighting switch, check the monitor status.
Is the inspection result normal?
YES
>> Replace IPDM E/R. Refer to
PCS-40, "Removal and Installation"
.
NO
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
(with Intelligent Key system) or
135, "Removal and Installation"
(without Intelligent Key system).
Monitor item
Condition
Monitor status
TAIL LAMP
Lighting switch
1ST
On
OFF
Off
EXL-260
< SYMPTOM DIAGNOSIS >
[LED HEADLAMP]
BOTH SIDE FRONT FOG LAMPS ARE NOT TURNED ON
BOTH SIDE FRONT FOG LAMPS ARE NOT TURNED ON
Description
INFOID:0000000011280903
The front fog lamps are not turned ON in any condition.
Diagnosis Procedure
INFOID:0000000011280904
1.
CHECK COMBINATION SWITCH
Check combination switch. Refer to
(with Intelligent Key system) or
(without Intelligent Key system).
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning part.
2.
CHECK FRONT FOG LAMP REQUEST SIGNAL INPUT
CONSULT DATA MONITOR
1. Select “FRONT FOG LAMP REQ” in “Data Monitor” of “IPDM E/R”.
2. With operating the front fog lamp switch, check the monitor status.
Is the item status normal?
YES
>> Replace IPDM E/R. Refer to
PCS-40, "Removal and Installation"
NO
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
(with Intelligent Key system) or
135, "Removal and Installation"
(without Intelligent Key system).
Monitor item
Condition
Monitor status
FRONT FOG LAMP REQ
Front fog lamp switch
(With lighting switch 2ND)
ON
On
OFF
Off
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст